Sharif Digital Repository

Surface settlement is considered as an adverse effect induced by tunneling in the civil projects. This paper proposes the use of the imperialist competitive algorithm (ICA) for predicting the maximum surface settlement (MMS) resulting from the tunneling. For this work, three forms of equations, i.e., linear, quadratic and power are developed and their weights are then optimized/updated with the ICA. The requirement datasets were collected from the line No. 2 of Karaj urban railway, in Iran. In the ICA models, vertical to horizontal stress ratio, cohesion and Young’s modulus, as the effective parameters on the MSS, are adopted as the inputs. The statistical performance parameters such as root... 

Abstract. The linear sequential circuit approximation method for combiners with memory is used to find mutually correlated linear transforms of the input and output sequences in the well-known summation generator with any number of inputs. It is shown that the determined correlation coefficient is large enough for applying a fast correlation attack to the output sequence to reconstruct the initial states of the input linear feedback shift registers. The proposed attack is based on iterative probabilistic decoding and appropriately generated low-weight parity-checks. The required output sequence length and the computational complexity are both derived. Successful experimental results for the... 

The influence of structural configuration on vibration responses of smart laminated beams under random loading is studied. The effect of laminate configurations and locations of sensors/actuators in the smart system is also investigated. The layer-wise approximation for displacement and electric potential is utilized to construct the finite element model. The closed-loop control response is determined through an optimal control algorithm based on the Linear Quadratic Regulator (LQR). The correlation coefficient between the input random force and the applied actuating voltage for various configurations is also computed. It is revealed that for softer configurations, the correlation... 

In this paper, a special probe is designed using an array of photodiodes and a 960 nm LED for recording the wrist photoplethysmogram (PPG). The design is based on Monte-Carlo simulation of light propagation in tissues. Two series of experiments were carried-out: normal breathing and deep breathing. In both experiments, finger and wrist PPG were simultaneously recorded from the index finger. In the first series of experiment, signals from 9 subjects were recorded and the correlation coefficient for the raw signals (AC+DC), the AC and DC components of wrist and finger PPG were (62.5% ± 12.1%), (91.2% ± 6.9%) and (61% ± 13.4%) respectively. In the second series of experiment (deep breathing),... 

Respiratory activity influences electrocardiographic measurements (ECG) in various ways. Therefore, extraction of respiratory information from ECG, namely ECG-derived respiratory (EDR), can be used as a promising noninvasive method to monitor respiration activity. In this paper, an automatic EDR extraction system using single-lead ECG is proposed. Respiration effects on ECG are categorized into two different models: additive and multiplicative based models. After selection of a proper model for each subject using a proposed criterion, gaussian process (GP) and phase space reconstruction area (PSRArea) are introduced as new methods of EDR extraction for additive and multiplicative models,... 

The Atmospheric Lifetime (ALT) of a compound represents the potential for the atmospheric accumulation of chemicals. Chemicals with a long lifetime are more resistant to natural decomposition and remain in the environment for a longer period. Minimum Ignition Energy (MIE) is one of the most important properties when evaluating hazardous chemicals. Despite the significance of these environment and safety-related properties, currently, there are no group contribution (GC) models that enable their predictive modeling. The present research aims at filling this gap. To this end, experimental data were collected from literature and the GC model parameters were estimated using the weighted... 

Maximal strength measurements of the trunk have been used to evaluate the maximum functional capacity of muscles and the potential mechanical overload or overuse of the lumbar spine tissues in order to estimate the risk of developing musculoskeletal injuries. A new triaxial isometric trunk strength measurement system was designed and developed in the present study, and its reliability and performance was investigated. The system consisted of three main revolute joints, equipped with torque sensors, which intersect at L5 - S1 and adjustment facilities to fit the body anthropometry and to accommodate both symmetric and asymmetric postures in both seated and standing positions. The dynamics of... 

Maximal strength measurements of the trunk have been used to evaluate the maximum functional capacity of muscles and the potential mechanical overload or overuse of the lumbar spine tissues in order to estimate the risk of developing musculoskeletal injuries. A new triaxial isometric trunk strength measurement system was designed and developed in the present study, and its reliability and performance was investigated. The system consisted of three main revolute joints, equipped with torque sensors, which intersect at L5-S1 and adjustment facilities to fit the body anthropometry and to accommodate both symmetric and asymmetric postures in both seated and standing positions. The dynamics of... 

Background: Chronic low back pain (CLBP) disability has been particularly frustrating because its treatment has been a great therapeutic challenge. Disability has been suggested to depend on different factors that should be found and considered in the medical management. The inter-segmental coordination is often impaired in CLBP subjects; however, to the best of our knowledge, there is no evidence about the relationship between the existence of coordination problems and disability in CLBP patients. Objective: To evaluate the correlation between sagittal plane trunk-pelvis intersegmental coordination parameters during walking and disability level in CLBP patients. Methods: Kinematic data were... 

Analytical Jacobian, nonlinear least square and three layer artificial neural network models are employed to predict deformation of mouse embryos under needle injection, based on experimental data captured from literature. The Maximum Absolute Error (MAE), coefficient of determination ( R2), Relative Error of Prediction (REP), Root Mean Square Error of Prediction (RMSEP), NashSutcliffe coefficient of efficiency ( Ef) and accuracy factor ( Af) are used as the basis for comparison of these three models. Analytical Jacobian, nonlinear least square and ANN models have yielded the correlation coefficient of 0.9985, 0.9964 and 0.9998, respectively. The REP between the models predicted values and... 

In this paper, we present a machine learning model to estimate the blood pressure (BP) of a person using only his photoplethysmogram (PPG) signal. We propose algorithms to better detect some critical points of the PPG signal, such as systolic and diastolic peaks, dicrotic notch and inflection point. These algorithms are applicable to different PPG signal morphologies and improve the precision of feature extraction. We show that the logarithm of dicrotic notch reflection index, the ratio of low-to high-frequency components of heart rate (HR) variability signal, and the product of HR multiplied by the modified Normalized Pulse Volume (mNPV) are the key features in accurately estimating the BP... 

In this study a novel Pt/Ni nanostructure consisting of nano-bushes and nanocubes was fabricated onto TiO 2 nanotubes. The scanning electron microscopy images showed that a large amount of well-dispersed nano-architectures had uniformly covered all over the surface which made an electrode with high surface area. It was obviously seen that the nanocube structures mainly consists of Ni had been grown on top of each other while the Pt colonies represented bush-like structures. As a non-enzymatic glucose biosensor, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an excellent performance. The proposed biosensor had two linear ranges for detection of glucose from 0 to 0.12 mM (correlation... 

In this study, a reliable and predictive model namely, least-squares support vector machine (LS-SVM) was developed to predict dye removal efficiency. Four LS-SVM models have been developed and tested using more than 630 series of experimental data which were obtained from our previous paper. These data consist of adsorbate type, adsorbent dosage, initial dye concentration, salt, absorbance time and dye removal efficiency. Direct Red 31 (DR31), Direct Green 6 (DG6) and Acid Blue (AB92) were used as a model dyes. The results show that the developed model is more accurate and reliable with the average absolute relative deviation of 0.678%, 0.877%, 0.581% and 0.978% for single systems and... 

An artificial neural network model was developed for modeling of the effects of mechanical alloying parameters including milling time, milling speed and ball to powder weight ratio on the characteristics of Al-8 vol%SiC nanocomposite powders. The crystallite size and lattice strain of the aluminum matrix were considered for modeling. This nanostructured nanocomposite powder was synthesized by utilizing planetary high energy ball mill and the required data for training were collected from the experimental results. The characteristics of the particles were determined by X-ray diffraction, scanning and transmission electron microscopy. Two types of neural network architecture, i.e. multi-layer... 

A carbon-paste electrode (CPE) modified with iron(II) phthalocyanine was used for the sensitive voltammetric determination of epinephrine (EN). The electrochemical response characteristics of the modified electrode toward EN, ascorbic acid (AA) and uric acid (UA) were investigated by cyclic and differential pulse voltammetry (CV and DPV). The results show an efficient catalytic activity of the electrode for the electro-oxidation of EN, which leads to improvement of reversibility of the electrode response and lowering its overpotential by more than 100 mV. The effect of pH and potential sweep rate on the mechanism of the electrode process was investigated. The modified electrode exhibits an... 

The permeability is one of the most important reservoir parameters and its accurate prediction is necessary for reservoir management and enhancement. Although many empirical formulas are derived regarding permeability and porosity in sandstone reservoirs [1], these correlations cannot be modified accurately in carbonate reservoir for the wells which are not cored and there is no welltest data. Therefore estimation of these parameters is a challenge in reservoirs with no coring sample and welltest data. One of the most powerful tools to estimate permeability from well logs is Artificial Neural Network (ANN) whose advantages and disadvantages have been discussed by several authors [2]. In this... 

Purpose: Despite the proven utility of multiparametric magnetic resonance imaging (MRI) in radiation therapy, MRI-guided radiation treatment planning is limited by the fact that MRI does not directly provide the electron density map required for absorbed dose calculation. In this work, a new deep convolutional neural network model with efficient learning capability, suitable for applications where the number of training subjects is limited, is proposed to generate accurate synthetic computed tomography (sCT) images from MRI. Methods: This efficient convolutional neural network (eCNN) is built upon a combination of the SegNet architecture (a 13-layer encoder-decoder structure similar to the... 

A magnetic polyurethane (PU) nanocomposite was synthesized by an electrospinning technique and applied for isolation and preconcentration of fluoxetine from aquatic and biological samples. The nanocomposite was electrospun using a PU polymer solution containing the dispersed magnetic nanoparticles. The magnetic properties of iron nanoparticles, along with the use of an electrospinning technique, led to the formation of a suitable sorbent toward isolation of fluoxetine. The magnetic PU nanofibers could be subsequently removed from the sample solution by applying a permanent magnet. The scanning electron microscopy (SEM) image of the magnetic PU nanofibers confirms that their diameters are in... 

Background: Celiac disease (CD) is a disorder associated with body reaction to gluten. After the gluten intake, an immune reaction against the protein occurs and damages villi of small intestine in celiac patients gradually. Objectives: The OSC, a filtering method for minimization of inter- and intra-spectrom-eter variations that influence on data acquisition, was applied to biofluid NMR data of CD patients. Patients and Methods: In this study, metabolites of total 56 serum samples from 12 CD patients, 15 CD patients taking gluten-free diet (GFD), and 29 healthy cases were analyzed using nuclear magnetic resonance (NMR) and associated theoretical analysis. Employ-ing ProMetab (version... 

In this letter, we consider two problems of sending a bivariate Gaussian source through a two-user Gaussian non-orthogonal multiple-access channel. We provide a new distortion outer bound for the considered joint source-channel coding problems, which significantly reduces the gap between inner and outer bounds of the distortion for correlation coefficients below a threshold. Furthermore, numerical results show, that under some conditions, our proposed outer bound matches with the inner bound obtained via the separate source-channel coding scheme, which proves the optimality of this scheme. © 1997-2012 IEEE