Sharif Digital Repository

We consider a demand response program in which a block of apartments receive a discount from their electricity supplier if they ensure that their aggregate load from air conditioning does not exceed a predetermined threshold. The goal of the participants is to obtain the discount, while ensuring that their individual temperature preferences are also satisfied. As such, the apartments need to collectively optimise their use of air conditioning so as to satisfy these constraints and minimise their costs. Given an optimal cooling profile that secures the discount, the problem that the apartments face then is to divide the total discounted cost in a fair way. To achieve this, we take a... 

In this study, the gas turbine power plant with preheater is modeled and the simulation results are compared with one of the gas turbine power plants in Iran namely Yazd Gas Turbine. Moreover, multiobjective optimization has been performed to find the best design variables. The design parameters of the present study are selected as: air compressor pressure ratio (rAC), compressor isentropic efficiency (ηAC), gas turbine isentropic efficiency (ηGT), combustion chamber inlet temperature (T3) and gas turbine inlet temperature. In the optimization approach, the exergetic, economic and environmental aspects have been considered. In multiobjective optimization, the three objective functions,... 

In the present study a comprehensive thermoeconomic modelling of a heat recovery steam generator (HRSG) for a typical 4MW class gas turbine is performed. Usually, the thermoeconomic analyses involve a thermodynamic model of the HRSG and an economic model dedicated to assess the cost. In this study, different configurations of single and dual pressure level HRSGs are optimized and afterward compared to find the economical design. For these configurations thermodynamic model calculates the performance and the energy balance of systems at the optimal operating conditions which are derived from optimization model, and economic model estimates total cost per unit of produced energy. Finally,... 

In Iran, there are more than 15,000. MW of wind power potential, but only about 90. MW have been installed since 2009. Because fuel costs are the main part of fuel-consumed power generation costs and fossil resource costs are highly subsidized in Iran, renewable energies such as wind power have yet to be fully developed. This analysis sets out to evaluate the total generating costs of wind power and conventional power plants in Iran. A levelized cost approach was conducted that included investment costs, O&M costs, fuel costs and external costs of emissions for each type of technology. Comparison of cost assessments of power generation show that by taking into account global fuel prices and... 

The aim of this paper is to investigate the feasibility of a combined cooling, heating, and power generation system with a micro turbine using biogas as the fuel to supply the heat and electricity demands in a real wastewater treatment plant. The plant is optimized using the system's total cost rate and the amount of the produced biogas as objective functions. The anaerobic digester is modeled using the ADM1 model. The optimization variables include digester hydraulic retention time, compressor pressure ratio, isentropic compressor efficiency, recuperator pinch time temperature, turbine isentropic efficiency, turbine input temperature, and the number of micro turbines. In the first scenario... 

The techno-economic and environmental performance of hybrid solar hydrogen energy systems was investigated to provide combined cooling, heating and power (CCHP) demands of a standalone greenhouse in Iran to achieve sustainable agriculture based on an optimization procedure. From the environmental point of view, by deploying hybrid energy systems, 83%, to 100% of emissions can be avoided. Also a sensitivity analysis was performed on the hybrid energy systems in order to study the effect of major parameter variation on the systems justification. It was concluded that hybrid solar systems are economically competitive with conventional systems, for high solar intensity locations with high diesel... 

This work offers an extensive framework for the techno-economic evaluation of the subsurface and surface components of low-grade geothermal (< 100 °C) desalination systems, that is based on validated hydrogeological, thermodynamic, and economic considerations. Additionally, this work incorporates a recently developed advanced multi-effect distillation (MED) process for an improved utilisation of the geothermal heat sources. The analysis focuses on a pre-feasibility study for Western Australia, the influence of the different cost drivers, especially the often overlooked geothermal well field parameters like permeability, so as to permit rational assessments of potential application sites. For... 

Today, cloud computing has developed as one of the important emergent technologies in communication and Internet. It offers on demand, pay per use access to infrastructure, platforms, and applications. Due to the increase in its popularity, the huge number of requests need to be handled in an efficient manner. Task scheduling as one of the challenges in the cloud computing supports the requests for assigning a particular resource so as to perform effectively. In the resource management, task scheduling is performed where there is the dependency between tasks. Many approaches and case studies have been developed for the scheduling of these tasks. Up to now, a systematic literature review... 

In the view of the latest status and the potential of developing wind energy in South Africa, the present study aims to perform technical–economic–environmental analysis on a wind turbine system with HOMER software using the 20-years average data of the wind speed obtained from NASA's database, for providing the electricity to residential buildings. The results showed that the Port Elizabeth station, had the lowest levelized cost of electricity (LCOE) with the value of -0.363 $/kWh when using the EOLO wind turbine, and the Bloemfontein station had the highest LCOE with the value of 1.601 $/kWh when using the Turby wind turbine. The results from the step-wise assessment ratio analysis... 

Assessment of groundwater quality monitoring networks requires methods to determine the potential efficiency and cost-effectiveness of the current monitoring programs. To this end, the concept of entropy has been considered as a promising method in previous studies since it quantitatively measures the information produced by a network. In this study, the measure of transinformation in the discrete entropy theory and the transinformation- distance (T-D) curves, which are used frequently by other researchers, are used to quantify the efficiency of a monitoring network. This paper introduces a new approach to decrease dispersion in results by performing cluster analysis that uses fuzzy... 

Stand-alone hybrid power systems are an alternative to main electricity grids, where the grid extension is costly or the trifling local consumption would not justify its expansion. However, lack of consistency and uniformity in renewable energy sources, and the restrictions of energy storage systems make system sizing a challenging task. Optimum size of a stand-alone system depends on several factors including energy demand function. In this paper, different types of demand functions are addressed for optimising a solar-hydrogen supply system. Different parameters are defined to investigate the impact of household population on the power generation cost, and also to determine the optimum... 

Stand-alone hybrid power systems are an alternative to main electricity grids, where the grid extension is costly or the trifling local consumption would not justify its expansion. However, lack of consistency and uniformity in renewable energy sources, and the restrictions of energy storage systems make system sizing a challenging task. Optimum size of a stand-alone system depends on several factors including energy demand function. In this paper, different types of demand functions are addressed for optimising a solar-hydrogen supply system. Different parameters are defined to investigate the impact of household population on the power generation cost, and also to determine the optimum... 

Stand-alone hybrid power systems are an alternative to main electricity grids, where the grid extension is costly or the trifling local consumption would not justify its expansion. However, lack of consistency and uniformity in renewable energy sources, and the restrictions of energy storage systems make system sizing a challenging task. Optimum size of a stand-alone system depends on several factors including energy demand function. In this paper, different types of demand functions are addressed for optimising a solar-hydrogen supply system. Different parameters are defined to investigate the impact of household population on the power generation cost, and also to determine the optimum... 

Automation systems provide substantial improvement in service reliability through speeding up fault management procedure. However, this is at expense of high investments whose justification needs thorough cost/worth analyses. This paper introduces a mathematical model to optimally place automation system devices within distribution networks. The model establishes a trade-off between service reliability improvements and the relevant costs. Among different automation system devices, fault indicators and remote controlled switches are considered here. Also, the impact of manual switches is regarded since their number and location significantly affect the solution of the placement problem. The... 

Automation systems provide substantial improvement in service reliability through speeding up fault management procedure. However, this is at expense of high investments whose justification needs thorough cost/worth analyses. This paper introduces a mathematical model to optimally place automation system devices within distribution networks. The model establishes a trade-off between service reliability improvements and the relevant costs. Among different automation system devices, fault indicators and remote controlled switches are considered here. Also, the impact of manual switches is regarded since their number and location significantly affect the solution of the placement problem. The... 

This paper proposes a simultaneous approach to manage congestion, evaluate congestion cost, and to allocate this cost among consumers in a short-run market model. The proposed method consists of an iterative algorithm to search and apply a sequence of the best feasible bilateral power exchange among the generators that would optimally reduce and completely remove the congestion. The best exchanges are selected using sensitivity analysis and the AC load flow is used to apply the selected exchange on the system. Congestion cost is calculated using the change in generation cost and divided among the overloaded lines regarding the change in power flow of these lines, after applying the selected... 

This paper develops the seismic damage models of brick masonry veneer attached to the masonry infill without metal ties and assesses the life cycle cost of veneers subjected to earthquake excitation. Even though anchoring veneers to the backup wall has been prescribed in recent building codes, most of the existing brick veneers in seismic prone areas around the world lack the anchoring details. Besides, the damage and consequence models of masonry façades have not been presented in the FEMA-P58 database restricting detailed performance evaluation of buildings with unanchored masonry veneers. This study develops detailed finite element models to simulate various failure modes of the masonry... 

The total cost of earthquakes is in this paper modeled as a continuous random variable that includes the cost of damage and the cost of construction to prevent damage. Realizations of this variable are obtained by evaluating an array of probabilistic models that take many basic random variables as input. Consequently, analyses can be conducted to determine the mean cost, as well as cost exceedance probabilities and other measures of seismic risk. Such results are employed to address the underlying decision problem, namely to minimize the total cost of earthquakes when that cost is a continuous random variable. Applicable decision theories are outlined and several risk measures are... 

Open access to transmission networks as well as designing an efficient cost allocation method are the key points that provide free competition for participants in power market. Restructuring in power systems has created new challenges which emphasize the development and fairness of economical criteria such as pricing of different services in market environment. Besides, the charge of network usage is a controversial subject, itself. To address this problem, many methods for transmission line cost allocation have been proposed. Amongst them, MW-Mile methods are based on the extent of use concept. Inability to take various fixed together with variable imposed costs into account can be... 

Airflow simulation of the whole respiratory system is still unfeasible due to the geometrical complexity of the lung airways and the diversity of the length scales involved in the problem. Even the new CT imaging system is not capable of providing accurate 3D geometries for smaller tubes, and a complete 3D simulation is impeded by the limited computational resources available. The aim of this study is to develop a fully coupled 3D-1D model to make accurate prediction of airflow and particle deposition in the whole respiratory track, with reasonable computational cost and efficiency. In the new proposed method, the respiratory tree is divided into three parts to be dealt with using different...