Loading...
Search for:
cyclic-voltammetry
0.011 seconds
Total 172 records
Voltammetric Determination of Tryptophan and 5-Hydroxytryptophan Using Graphite Electrode Modified with a Thin Film of Graphite/Diamond Nano-mixture And Determination of omeprazole Using Graphite Electrode
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhian, Saeed
(Supervisor)
Abstract
At the first part of this thesis, a pyrolitic graphite electrode (PGE) modified with graphite/nanodiamond film (GND) was applied as a sensitive electrochemical sensor for determination and study of electrochemical behavior of tryptophan (Trp) and 5-hydroxytryptophan (5-HTP) in aqueous solutions. The results showed that GND caused a remarkable increase in the peak currents so the GND/PGE electrode surface was more sensitive to the concentration of Trp and 5-HTP than the PGE surface. The determination of Trp and 5-HTP were investigated by stripping voltammetry. Experimental parameters such as scan rate, pH, accumulation conditions and amount of the modifier used on the PGE surface were...
Experimental and Theoretical investigation of Electro-oxidation of C1 Compounds on Nickel and Copper Surfaces
, M.Sc. Thesis Sharif University of Technology ; Gobal, Fereydoon (Supervisor)
Abstract
A study of the electro-oxidation and surface reactions of C1 compounds on Ni and Cu electrodes, Ni(111) and Cu (111) has been performed by methods of cyclic voltammetry, BOC-MP and DFT. The diffusion coefficients and activation energies of the electro-oxidation of methanol and formaldehyde in alkaline solution on Ni electrode have been derived. Values around 2.27×10-6 cm2s-1, 1.98×10-5cm2s-1, 12.15 Kcal mol-1 and 11.65 Kcal mol-1 have been obtained respectively. In theoretical study , the elimination of hydrogen from CH3 and CH2 groups has been proposed as a mechanism in surface reactions of methanol and formaldehyde on Ni(111) ...
Chemically Modified Electrodes Based on Conducting Polymers and Carbon Nanotubes: Application to Voltammetric Determination of Some Biological and Pharmaceutical Compounds
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhian, Saeed
(Supervisor)
Abstract
There are high attractions in the development of conducting polymer (CP) coatings to improve the electrochemical properties and biocompatibility of electrodes in the area of biosensors. In the first part of this thesis, a new type of modified electrodes, constructing multi-walled carbon nanotubes (MWCNTs) and polypyrrole is prepared in a layer-by-layer process. In this procedure, the glassy carbon electrode is casted first by a drop suspension of MWCNTs, leading to formation a thin film on its surface. In the second step, electrochemical polymerization of pyrrole in the presence of tiron (used as doping anion) is performed on the surface of the MWCNTs pre-coated electrode. The modification...
Electrochemical Determination of Piroxicam at thin Carbon
Nanoparticle Composite And Investigation of the Electrochemical Behavior and Synthesis of Catechols in the Presence of Mercapto Methyl Tetrazol as a Nucleophile
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhian, Saeed
(Supervisor)
Abstract
The electrochemical oxidation behavior of the anti-inflammatory drug piroxicam was investigated. A carbon nanoparticle (CNP)-chitosan (CS) film-coated graphite electrode (PGE) was fabricated and the electrochemical behaviors of piroxicam on its surface was investigated by the means of cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). In comparison to the bare PGE, at the surface of the CNP-CS film modified electrode, the oxidation peak current of piroxicam increased significantly and the peak potential shifted negatively. Consequently, a simple and sensitive electroanalytical method was developed for the determination of piroxicam. The...
An experimental and computational study on the rate constant of electrochemically generated n-acetyl-p- quinoneimine with dimethylamine
, Article International Journal of Electrochemical Science ; Vol.3, Issue 10 , September , 2008 , PP. 1092-1107 ; 14523981 ; Haqgu, M. (Mohammad) ; Nematollahi, D. (Davood) ; Gholami, M. R. (Mohammad Reza) ; Sharif University of Technology
Abstract
Electrochemical oxidation of acetaminophen (N–acetyl–p–aminophenol) (1) has been studied in the presence of dimethylamine (2) as a nucleophile in aqueous solution, by means of cyclic voltammetry and controlled-potential coulometry. The results indicate the participation of electrochemically generated N-acetyl-p-quinoneimine (1a) in Michael reaction with dimethylamine (2). Based on ECE mechanism, the observed homogeneous rate constant (kobs) of the above mentioned reaction is estimated by comparing the experimental cyclic voltammograms with the digital simulated results. Further more; kinetics and mechanism of the reaction were studied with ab initio calculation, Monte Carlo and QM/MM...
Novel unbreakable solid-phase microextraction fibers on stainless steel wire and application for the determination of oxadiargyl in environmental and agricultural samples in combination with gas chromatography-mass spectrometry
, Article Talanta ; Vol. 128, issue , 2014 , Pages 231-236 ; ISSN: 00399140 ; Baghernejad, M ; Bagheri, H ; Sharif University of Technology
Abstract
Sol-gel based solid-phase microextraction fibers supported by a stainless steel wire were fabricated and employed for GC-MS determination of oxadiargyl in real samples. The fibers were based on four compounds with different polarity: polar and non-polar (end-capped) poly(dimethylsiloxane) (PDMS), polyethylene glycol (PEG), and poly(ethylene-propyleneglycol)-monobutyl ether (UCON). For this purpose, the surface of the stainless steel was initially modified by (3-mercaptopropyl) trimethoxysilane. The results of the modification procedure were evaluated by cyclic voltammetry and energy dispersive X-ray (EDX) spectroscopy. After the modification, four different sol-gel based SPME fibers with...
Modification of well-aligned carbon nanotubes with dihexadecyl hydrogen phosphate: Application to highly sensitive nanomolar detection of simvastatin
, Article Journal of Applied Electrochemistry ; Volume 44, Issue 2 , February , 2014 , Pages 263-277 ; ISSN: 0021891X ; Afshar, A ; Dolati, A ; Ghalkhani, M ; Sharif University of Technology
Abstract
The first usage of dihexadecyl hydrogen phosphate (DHP)-modified highly oriented multi-walled carbon nanotube (MWCNTs) forests in a sensor configuration was developed to investigate the electrochemical oxidation and determination of simvastatin (SV) in pharmaceutical dosage forms. Synthesis of well-aligned MWCNTs on a conductive Ta substrate by catalytic vapor deposition technique using a common chemical, ethylenediamine, and without being plasma-aided was reported. The electrochemical behavior and oxidation of SV at the aligned MWCNTs/DHP/Ta electrode were discussed in detail through cyclic voltammetry and differential pulse voltammetry. This modified electrode showed considerably higher...
The effect of layer number on the nanostructural ternary mixed oxide containing Ti, Ru and Ir on titanium
, Article Advanced Materials Research ; Vol. 829 , 2014 , pp. 638-642 ; Ghorbani, M ; Sharif University of Technology
Abstract
Titanium anodes coated with noble metal oxides are widely used in chlorate industry. In fact, these anodes are dimensionally stable. In this article, the electrochemical characteristics of the ternary oxide coating created by sol-gel on titanium, which consisted of Ti, Ru and Ir, were investigated in the number of different layers. The electrochemical properties of anodes, morphology of samples, and phase analysis were investigated respectively by cyclic voltammetry and polarization measurements, Field Emission Scanning Electron Microscope (FESEM) and XRD. The result indicated that the application of the more layer number increases the rate of chlorine evolution. Also, The morphology of the...
Electrochemical synthesis of reduced graphene oxide/TiO2 nanotubes/Ti for high-performance supercapacitors
, Article Ionics ; Volume 21, Issue 2 , 2014 , Pages 525-531 ; ISSN: 09477047 ; Faraji, M ; Sharif University of Technology
Abstract
RGO/TiO2NTs/Ti electrodes with high surface area and good capacitive characteristics were prepared by simple electrochemical reduction of graphene oxide (GO) onto the previously formed TiO2 nanotubes. Microstructure studies show that reduced graphene oxide (RGO) having high surface area has been deposited onto the TiO2NT arrays. The electrochemical capacitive behaviors of the obtained electrodes were investigated by cyclic voltammetry (CV), galvanostatic charge–discharge studies, and electrochemical impedance spectroscopy (EIS) in 1 M H2SO4 solution. The electrochemical data demonstrated that the electrodes displayed specific capacitance of 410 F g−1 at the current density of 50 A g−1 and...
Rapid and simultaneous determination of tetracycline and cefixime antibiotics by mean of gold nanoparticles-screen printed gold electrode and chemometrics tools
, Article Measurement: Journal of the International Measurement Confederation ; Vol. 47, Issue. 1 , 2014 , pp. 145-149 ; ISSN: 02632241 ; Mani-Varnosfaderani, A ; Sharif University of Technology
Abstract
The screen-printed gold electrode (SPGE) modified with the formation of self-assembly monolayer (SAM) of cysteine (Cys) on gold-nanoparticles (Au nano) was utilized for rapid and simultaneous determination of tetracycline and cefixime antibiotics by square wave voltammetry (SWV). Electrochemical investigation and characterization of the modified electrode was achieved using cyclic voltammetry (CV) and scanning electron microscopy (SEM). A principal component artificial neural network (PCANN) with three layer back-propagation network was utilized for the analysis of the voltammogram data. It is possible to simultaneously determine the tetracycline and cefixime concentrations in the ranges of...
Preparation and electrochemical performances of nanoporous/cracked cobalt oxide layer for supercapacitors
, Article Applied Physics A: Materials Science and Processing ; Vol. 117, issue. 4 , 2014 , pp. 2087-2094 ; ISSN: 09478396 ; Faraji, M ; Sharif University of Technology
Abstract
Nanoporous/cracked structures of cobalt oxide (Co3O4) electrodes were successfully fabricated by electroplating of zinc–cobalt onto previously formed TiO2 nanotubes by anodizing of titanium, leaching of zinc in a concentrated alkaline solution and followed by drying and annealing at 400 °C. The structure and morphology of the obtained Co3O4 electrodes were characterized by X-ray diffraction, EDX analysis and scanning electron microscopy. The results showed that the obtained Co3O4 electrodes were composed of the nanoporous/cracked structures with an average pore size of about 100 nm. The electrochemical capacitive behaviors of the nanoporous Co3O4 electrodes were investigated by cyclic...
Synthesis and electrochemical characterization of sol-gel-derived RuO 2/carbon nanotube composites
, Article Journal of Solid State Electrochemistry ; Vol. 18, Issue 4 , April , 2014 , pp. 993-1003 ; Online ISSN: 1433-0768 ; Asnavandi, M ; Dolati, A ; Sharif University of Technology
Abstract
Ruthenium oxide was coated on multiwalled carbon nanotubes (MWCNTs) to obtain nanocomposite electrode which has a good response to the pH. To synthesize this electrode, gold and cobalt were coated on a stainless steel 304 substrates, respectively, and then, vertically aligned carbon nanotubes were grown on the prepared substrates by chemical vapor deposition. Gold reduced activity of the stainless steel, while cobalt served as a catalyst for growth of the carbon nanotube. Ruthenium oxide was then coated on MWCNTs via sol-gel method. At last, different techniques were used to characterize the properties of synthesized electrode including scanning electron microscopy (SEM), transmission...
Pd-Au nanoparticle decorated carbon nanotube as a sensing layer on the surface of glassy carbon electrode for electrochemical determination of ceftazidime
, Article Materials Science and Engineering C ; Vol. 34, issue. 1 , 2014 , pp. 318-325 ; ISSN: 09284931 ; Salimian, R ; Rastgar, S ; Sharif University of Technology
Abstract
A simple electrodeposition method is employed to construct a thin film modifier of palladium-gold nanoparticles (Pd-AuNPs) decorated multi-walled carbon nanotube (MWCNT) on the surface of glassy carbon electrode (GCE). Morphology and property of Pd-AuNPs-MWCNT have been examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Electrochemical performance of Pd-AuNPs-MWCNT/GCE for detection of ceftazidime (CFZ) has been investigated by cyclic voltammetry (CV). This nanostructured film modified electrode effectively exhibited enhanced properties for detection of ceftazidime (CFZ). The effects of various experimental variables such as, the amount of casted MWCNT,...
MnO2/ordered mesoporous carbon nanocomposite for electrochemical supercapacitor
, Article Journal of Solid State Electrochemistry ; Vol. 18, issue. 4 , 2014 , pp. 1117-1125 ; Khani, H ; Mohammadi, N ; Sharif University of Technology
Abstract
The preparation of composite manganese dioxide (MnO2) nanoparticles in an ordered mesoporous carbon (CMK-3) matrix and its use for constructing a new wide-potential-window supercapacitor is reported. CMK-3 is prepared using mesoporous silica as a hard template and sucrose as carbon source. The different ratios of MnO2/CMK-3 composite is synthesized by impregnating CMK-3 with a Mn(NO3)2·4H 2O solution followed by annealing in nitrogen. Physical properties, morphology, and specific surface area were characterized by X-ray diffraction, transmission electron microscopy, and nitrogen sorption measurements, respectively. The electrochemical properties of the composite were studied by cyclic...
Fabrication of an electrochemical sensor based on the electrodeposition of Pt nanoparticles on multiwalled carbon nanotubes film for voltammetric determination of ceftriaxone in the presence of lidocaine, assisted by factorial-based response-surface methodology
, Article Journal of Solid State Electrochemistry ; Vol. 18, issue. 1 , 2014 , p. 77-88 ; Hosseini-Nassab, N ; Kamalzadeh, Z ; Sharif University of Technology
Abstract
A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01-10.00 μM with a detection limit of...
Advanced gel polymer electrolyte for lithium-ion polymer batteries
, Article ASME 2013 7th Int. Conf. on Energy Sustainability Collocated with the ASME 2013 Heat Transfer Summer Conf. and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology ; July , 2013 ; 9780791855515 (ISBN) ; Hashemi, N ; Ashuri, M ; Montazami, R ; Advanced Energy Systems Division, Solar Energy Division ; Sharif University of Technology
2013
Abstract
We report improved performance of Li-ion polymer batteries through advanced gel polymer electrolytes (GPEs). Compared to solid and liquid electrolytes, GPEs are advantageous as they can be fabricated in different shapes and geometries; also ionic properties are significantly superior to that of solid and liquid electrolytes. We have synthetized GPE in form of membranes by trapping ethylene carbonate and propylene carbonate in a composite of polyvinylidene fluoride and N-methylpyrrolidinore. By applying phase-transfer method, we synthetized membranes with micro-pores, which led to higher ionic conductivity. The proposed membrane is to be modified further to have higher capacity, stronger...
Fabrication of nanoporous nickel oxide by de-zincification of Zn-Ni/(TiO2-nanotubes) for use in electrochemical supercapacitors
, Article Electrochimica Acta ; Volume 100 , 2013 , Pages 133-139 ; 00134686 (ISSN) ; Faraji, M ; Sharif University of Technology
2013
Abstract
NiO-ZnO/TiO2NTs electrodes were synthesized by the electrodeposition of Zn-Ni onto TiO2 nanotubes, dealloying in a concentrated alkaline solution and finally calcination of the resulting Zn(OH)2-Ni(OH)2/TiO2NTs at 300 C. Morphology of the electrodeposited nanostructures was studied using scanning electron microscopy (SEM) while their electrochemical characterizations were carried out using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge/discharge procedures. The SEM analysis revealed the nanoporous/cracked structures of the NiO-ZnO/TiO2NTs obtained at the electroplating time of 20 min. The EIS studies showed that nanoporous/cracked structures of...
Highly sensitive 3D gold nanotube ensembles: Application to electrochemical determination of metronidazole
, Article Electrochimica Acta ; Volume 106 , 2013 , Pages 288-292 ; 00134686 (ISSN) ; Ghorbani, M ; Ghalkhani, M ; Vossoughi, M ; Dolati, A ; Sharif University of Technology
2013
Abstract
Three-dimensional gold nanoelectrode ensembles (3D GNE) have proven to be promising nanoelectrodes by representing much higher sensitivity compared to both their 2D nanostructures and bulk counterparts. The sensitivity of 3D gold nanotubes (GNTs) fabricated through electrodeposition inside the pores of polycarbonate templates, was examined toward metronidazole (MTZ) as one of their pharmaceutical applications. The electrochemical behavior of MTZ at the 3D GNT-modified electrode was discussed in detail through cyclic voltammetry (CV) which suggested an irreversible reduction of nitro group to the corresponding hydroxylamine and a subsequently reversible redox peak for the corresponding...
Zeolite encapsulated Ni(II)-Schiff-base complex: A novel size-selective electro-catalyst for the determination of the purity of stevioside
, Article Talanta ; Volume 108 , April , 2013 , Pages 19-29 ; 00399140 (ISSN) ; Jafarian, M ; Etezadi, S ; Gobal, F ; Khakali, M ; Rayati, S ; Ghasem Mahjani, M ; Sharif University of Technology
2013
Abstract
Ship-in-a-bottle complex of nickel(II) containing the ligand N,N′-bis(2,4-dihydroxyacetophenone)-2,2-dimethylpropandiimine (H 2{salnptn(4-OH)2}) has been synthesized in zeolite Y. The characteristics of the encapsulated complex are identified by the methods of EDX, SEM, XRD, FT-IR and cyclic voltammetry. A catalytic effect in the electrochemical oxidation of glucose, fructose and sucrose, and a blocking effect in stevioside oxidation are demonstrated on the Ni II{salnptn(4-OH)2}-Y/CPE. The effects of some parameters, such as potential scan rate and concentration of carbohydrates are investigated. The rate constants for the catalytic reaction (k′) of carbohydrates are also obtained. The...
Bimodal electricity generation and aromatic compounds removal from purified terephthalic acid plant wastewater in a microbial fuel cell
, Article Biotechnology Letters ; Volume 35, Issue 2 , 2013 , Pages 197-203 ; 01415492 (ISSN) ; Kariminia, H. R ; Savizi, I. S. P ; Sharif University of Technology
2013
Abstract
Wastewater of purified terephthalic acid (PTA) from a petrochemical plant was examined in a membrane-less single chamber microbial fuel cell for the first time. Time course of voltage during the cell operation cycle had two steady phases, which refers to the fact that metabolism of microorganisms was shifted from highly to less biodegradable carbon sources. The produced power density was 31.8 mW m-2 (normalized per cathode area) and the calculated coulombic efficiency was 2.05 % for a COD removal of 74 % during 21 days. The total removal rate of different pollutants in the PTA wastewater was observed in the following order: (acetic acid) > (benzoic acid) > (phthalic acid) > (terephthalic...