Sharif Digital Repository

This paper presents a new architecture for VCO-based Continuous Time Delta Sigma Modulators. This approach is based on the differential configuration for the quantizer while maintains its inherent dynamic element matching property. Consuming no additional power and area compared to the conventional scheme, this architecture can eliminate the even orders of harmonic distortion and achieve higher linearity. Theoretical analysis for signal to quantization noise, power and area consumption and mismatch effect is provided. To illustrate the effectiveness of the new architecture in continuous time modulators, a modulator with 640 MHz sampling rate utilizing the mentioned quantizer is simulated in... 

In this paper, we consider the problem of transmitting a Bi-variate Gaussian source S = (S1, S2) over an average-power-limited additive White Gaussian noise (AWGN) channel. The receiver wants to estimate both S1 and S2. We propose a new Hybrid Digital Analog (HDA) joint source-channel coding scheme and obtain its achievable distortion region. For comparison, we also obtain an outer bound for the set of all achievable distortion pairs  

Improvement in switching techniques is one of the effective methods for increasing the voltage quality in Multilevel Inverters. In this paper, a novel switching technique using frequency modulation is proposed to achieve high quality output voltage of multilevel inverters. This method is employed to different configurations of multilevel inverters consist of Diode Clamped (or Neutral Point Clamped), Flying Capacitor and Cascaded H-bridge. Each multilevel inverter which utilizes this technique is modeled and simulated to investigate the performance of this method by the help of MATLAB/Simulink software. The Results show that this innovative method considerably reduces total harmonic... 

The increased penetration of cellular networks has made voice channels widely available ubiquitously. On the other hand, mobile voice channels possess properties that make them an ideal choice for high priority, low-rate real-time communications. Mobile voice channel with the mentioned properties, could be utilised in emergency applications in vehicular communications area such as the standardised emergency call system planned to be launched in 2015. This study aims to investigate the challenges of data transmission through these channels and proposes an efficient data transfer structure. To this end, a proper statistical model for the channel distortion is proposed and an optimum detector... 

Similarity measure is an important part of image registration. The main challenge of similarity measure is lack of robustness to different distortions. A well-known distortion is spatially-varying intensity distortion. Its main characteristic is correlation among pixels. Most traditional intensity based similarity measures (e.g., SSD, MI) assume stationary image and pixel to pixel independence. Hence, these similarity measures are not robust against spatially-varying intensity distortion. Here, we suppose that non-stationary intensity distortion has a sparse representation in transform domain, i.e. its distribution has high peak at origin and a long tail. We use two viewpoints of Maximum... 

In this paper we extended a previously investigated modular method that is designed to compensate for interpolation distortions of one-dimensional signals, to two dimensions (2-D). Next the proposed 2-D modular technique was applied in an iterative fashion and was shown through both simulations and theoretical analyses to enhance the convergence of the iterative technique. In fact, with only a few modules we were able to achieve drastic improvements in signal reconstruction, and with a much less computational complexity. Moreover, both the simulations and the theoretical analysis confirmed the robustness of the proposed scheme against additive noise  

In certain types of biomimetic surgery systems, micro robots inspired by Paramecium are designed to swim in a capillary tube for gaining access to internal organs with minimal invasion. Gaining insight into the mechanics of Paramecium swimming in a capillary tube is vital for optimizing the design of such systems. There are two approaches to modeling the physics of micro swimming. In the envelope approach, which is widely accepted by researchers, Paramecium is approximated as a sphere, self-propelled by tangential and normal surface distortions. However, not only is this approach incapable of considering the specific geometry of Paramecium, but it also neglects short range hydrodynamic... 

Robustness against attacks is an important requirement in image watermarking. This paper presents a robust watermarking algorithm in wavelet transform domain. Firstly, original image is decomposed into its subbands using three level wavelet transform, then, significant coefficients with the same position in HL, LH and HH subbands of the last level are extracted to make a triplet. To embed a watermark bit into a triplet, the standard deviation of triplet coefficients magnitude is set to zero for zero bit or increased for a one bit. Three constant are used to increase the standard deviations of a triplet coefficients. The value of these constants affects the robustness of algorithm and the... 

With the ever-growing portion of internet traffic associated with multimedia data and the existence of multiple copies of the same content in various forms, it has become vital to measure the quality of the image and video files. In most cases, without access to the original file, the quality shall be assessed solely based on the available file. Specifically, the challenge of no-reference image quality assessment (NR-IQA) is to predict a quality measure for given images in a consistent manner with human perception of quality. Conventional NR-IQA methods try to fit certain distortion models to a given image and quantify the quality. In practice, however, an image is affected by a combination... 

In a SEnsor Network with Mobile Agents (SENMA) is an architecture proposed for large scale sensor networks. In sensor networks, a fraction of the packets generated by only part of the sensors is sufficient to provide a good estimation of all network information. SENMA uses this inherent redundancy. However, the performance of such system is limited by estimation errors and packet errors due to collision. Estimation error is a major problem in applications such as habitat monitoring in which information is a function of node position. In this paper, we first derive the equations of distortion in a general scenario and use this model to compare the estimation error for regular networks. Then... 

Determining the capacity of watermark for images is a complex task. This capacity may be influenced by many factors such as the content of image and also the strength of watermark. In some recent works the image content has been considered for calculation of watermark capacity. One such approach is to use the Noise Visibility Function (NVF) introduced in [3]. In this paper we introduced a new method for finding NVF according to the quad tree representation of image instead of using pixel neighborhood data. Our experimental results showed that the depth of a pixel in image quad tree represents much information about the pixel and its maximum allowable distortion compared to pixel neighborhood... 

In this paper, we have introduced a new approach to deal with motion estimation block distortion measure (BDM) which has a great role in performance comparison of various methods. The proposed method generates lower BDM, by employing transformed matrices of original frames to compute motion vectors regardless of the algorithm employed as motion estimator. Our experimental results that use the semi DPCM predictor residual matrices as the transformation tool, justify the proposed approach. © 2005 IEEE  

A hybrid video codec, where the intraframe pictures are wavelet-based coded and the interframe pictures are coded with a standard H.263 codec is proposed. We show that intraframe-wavelet coded pictures not only improve the quality of I-pictures but also result in lower distorted prediction pictures that outperforms a pure H.263 video codec. © 2005 IEEE  

A continuous growth in nonlinear loads may cause an increment in harmonic distortion and some other important problems in power systems so considering power quality effects in optimal reactive power planning has become more crucial than before. In this paper, optimal reactive power planning based on voltage profile deviation and voltage THD decrement is studied. The planning problem is studied using reactive power injection in each bus bar and genetic algorithm is also used for solving optimization problem. Obtained results for 5-bus and 30-bus IEEE standard networks are also presented. ©2004IEEE  

The nonlinear characteristic of an laser diode, LD, impacts on the performance of optical wireless systems using OFDM(orthogonal frequency division multiplexing). First, the influence of the nonlinear characteristic on bit-error performance is analyzed using a high power LD (LML-808.7B-XX). Next, the paper proposes a pre-distorter to compensate the nonlinearities. Finally, the coherent optical OFDM (CO-OFDM) system is considered and the performance without linearization and after linearization is analyzed via simulations in an AWGN (additive white Gaussian noise) environment. It is shown that LD nonlinearity can significantly degrade the performance. However, it is demonstrated that this... 

This paper presents a new method for implementing the direct torque control (DTC) on the brushless doubly fed induction machines (BDFM) in presence of turbulence in voltage grid. It is supposed irrupts in three phase voltage grid suddenly. Effects of these events on closed-loop operation are inevitable and in some cases could lead to system instability. It presumed that grid voltages disturbance effect on back-To-back converter's outputs is negligible. Control of a complex machine is problematic. Hence, firstly has explained performance of the control method on BDFM, Proposed a new method for reducing turbulence effects of system operation afterward. Simulation results on BDFM model with... 

Multiple Description Coding (MDC) is a technique for video transmission over error prone networks where the descriptions are routed over multiple paths. Intra coding like MDC provides error resiliency but coding in this mode must be decided with care since it degrades the compression ratio. In this paper, we present our investigation results for a new intra coding approach in MDC. We have found that, in MDC streams, the best policy is to encode selective frames as I-frame instead of coding some macroblocks of frames in intra mode. In order to find the most suitable I-frame positions within a given video stream, we developed a cost function based on which intra/inter frame type is decided.... 

Conventional back-to-back converters with input power factor correction are still the best solution for motor drive applications which are usually subjected to considerable load changes during their operation. Since converter components, especially input-side inductances are designed for nominal power rating, the rated input power factor and input current distortion aren't achievable in light loads. In this paper a control method is proposed to improve the input current distortion and input power factor in light loads. This is achieved by increasing the switching frequency according to the reduction in load. Since conduction and switching losses decrease in light loads, the overall losses by... 

Nowadays position sensors are increasingly used in many applications. One of the most commonly used sensors are resolvers. There are different types of resolvers including Wound Rotor (WR) resolvers, Variable Air-gap Length Variable Reluctance (VAGL-VR) resolvers, and Sinusoidal Rotor Variable Reluctance (SR-VR) resolvers. Regardless of the resolvers’ configurations, including linear, cylindrical and disk type, finite element analysis (FEA) is inseparable part of design and performance evaluation of these magnetic sensors. The scope of this study is to discuss challenges in the FEA of resolvers. The influence of mesh quality, time steps, stop time, excitation methods including volt-age... 

Nowadays, position sensors are increasingly used in many applications. One of the most commonly used sensors are resolvers. There are different types of resolvers including wound rotor resolvers, variable air-gap length variable reluctance resolvers, and sinusoidal rotor variable reluctance resolvers. Regardless of the resolvers' configurations, including linear, cylindrical and disk type, finite element analysis (FEA) is inseparable part of design and the performance evaluation of these magnetic sensors. The scope of this study is to discuss challenges in the FEA of resolvers. The influence of mesh quality, time steps, stop time, excitation methods including voltage source and current...