Sharif Digital Repository

In this study, the unsteady three dimensional nanofluid flow, heat and mass transfer in a rotating system in the presence of an externally applied uniform vertical magnetic field is investigated. This study has different applications in rotating magneto-hydrodynamic (MHD) energy generators for new space systems and also thermal conversion mechanisms for nuclear propulsion space vehicles. The important effects of Brownian motion and thermophoresis have been included in the model of nanofluid. The governing equations are non-dimensionalized using geometrical and physical flow field-dependent parameters. The velocity profiles in radial, tangential and axial directions, pressure gradient,... 

Hydrophobic titania nanoparticles were synthesized by a novel in situ sol-gel method and applied in a single drop liquid-liquid extraction column to enhance the overall dispersed-phase mass transfer coefficient (Kod). The chemical system of toluene, acetic acid and water was used, and the direction of solute (acetic acid) mass transfer was from dispersed phase, including: toluene and acetic acid to the continuous phase of water. For such system, much of the mass transfer resistance exists in the dispersed phase, which is nonpolar organic liquid. Hence, modified titania nanoparticles (MTNP's), prepared by sol-gel route, in five different concentrations of 0.001–0.005 wt.% were added in the... 

Multiphase flow is fundamental to different fields of engineering and science including petroleum engineering. In oil and gas, flow of multiple phases inside wells is a common phenomenon. In such conditions, petroleum engineers deal with different design and operational difficulties due to complexities involved in flow of multiple phases inside a well. Unlike flow of gas and liquid inside a well, the liquid-liquid flow inside a horizontal well has received rather less attention. This study is aimed at experimentally investigating multiphase flow in a horizontal well by using a 12 m length and 30 mm diameter well made of Plexiglas. Despite the importance of defining pattern transition... 

Proposing an efficient algorithm with an appropriate hardware implementation has always been an interesting and a rather challenging field of research in Artificial Intelligence (AI). Fuzzy logic is one of the techniques that can be used for accurate and high-speed modeling as well as controlling complex and nonlinear systems. The “defuzzification” process during the test phase as well as the repetitive processes in order to find the optimal parameters during the training phase, lead to some serious limitations in real-time applications and hardware implementation of these algorithms. The proposed algorithm employs Ink Drop Spread (IDS) concept to mimic the functionality of human brain. In... 

The presence of small amount of polymer in Newtonian liquids affects the fluid behavior significantly and creates superficial differences between Newtonian and non-Newtonian drop formation. In the present study, Newtonian and non-Newtonian shear-thinning drop formation in air is examined experimentally and the geometrical parameters, such as drop elongation length, minimum neck diameter and current contact angle are studied for water, glycerin solutions (79, 89 and 94% w/w) and Carboxymethyl cellulose (CMC) solutions (0.5 to 1.5% w/w) drops. The results indicate that at initial stages of the drop growth, Newtonian and non-Newtonian liquids behave similarly. However, at the start of the... 

Droplet microfluidic systems have attracted a large amount of research due to their numerous applications in biomedical micro-devices and drug discovery/delivery platforms. One of the most important problems in such systems is to investigate deformation, coalescence, and breakup of droplets within the channel. The present study demonstrates numerical simulation of a falling droplet subject to gravitational force in a channel with embedded rectangular obstacles. The lattice Boltzmann method incorporated using He–Chen–Zhang method for two phase flow is employed. Two rectangular obstacles with inverse aspect ratios are introduced to investigate the mechanism of breakup and deformation of the... 

This article presents a simulation study of tapered-in and tapered-out fluidized bed reactors to investigate the influences of apex angle on the fractional conversion and the pressure drop of the fluidized beds in the presence of two types of chemical reaction with gas volume increase and reduction. The 2D behavior of tapered-in and -out fluidized beds was also compared with a columnar one from fractional conversion and bed pressure drop point of views. To validate the simulation results, the numerical predictions for the expansion ratio and the pressure drop of a tapered fluidized bed were compared with experimental data and good agreement was observed. The obtained simulation results... 

In this report the wetting behaviour between polycrystalline alumina substrates and molten aluminium doped with magnesium as a wetting agent has been studied using the sessile drop technique. The time required for equilibrium attainment is investigated. To explore the formation of possible phases at the interface, electron microscopic studies along with EDX analysis have been employed. It is found that magnesium reduces the time and temperature required for equilibrium in the Al/Al2O3 system. The Al-7 wt% Mg and Al-10 wt% Mg alloys can wet alumina at temperatures as low as 900 °C. It is also found that molten aluminium doped with magnesium can wet polycrystalline alumina at temperatures... 

This article presents a simulation study of tapered-in and tapered-out fluidized bed reactors to investigate the influences of apex angle on the fractional conversion and the pressure drop of the fluidized beds in the presence of two types of chemical reaction with gas volume increase and reduction. The 2D behavior of tapered-in and -out fluidized beds was also compared with a columnar one from fractional conversion and bed pressure drop point of views. To validate the simulation results, the numerical predictions for the expansion ratio and the pressure drop of a tapered fluidized bed were compared with experimental data and good agreement was observed. The obtained simulation results... 

This article presents a simulation study of tapered-in and tapered-out fluidized bed reactors to investigate the influences of apex angle on the fractional conversion and the pressure drop of the fluidized beds in the presence of two types of chemical reaction with gas volume increase and reduction. The 2D behavior of tapered-in and -out fluidized beds was also compared with a columnar one from fractional conversion and bed pressure drop point of views. To validate the simulation results, the numerical predictions for the expansion ratio and the pressure drop of a tapered fluidized bed were compared with experimental data and good agreement was observed. The obtained simulation results... 

Two-phase flow inside the oil and gas wells and flow path lines is a usual occurrence in petroleum and petrochemical studies. Due to its complexity, flow transfer parameters such as hold up and pressure drop and their dependency on the flow regime maps are not well understood yet. This study is aimed at analyzing holdup for oil- water system and evaluation of this parameter by means of Image processing under different available flow regime conditions. In addition, different oil-polymer systems have been studied to evaluate the impact of polymer concentration on transport criteria. The experimental setup used for this study is consisted of a 12 m long Plexiglas pipe with an inner diameter of... 

In this study, ferrofluid droplet formation from a nozzle in the presence of a non-uniform Pulse-Width Modulated (PWM) magnetic field with different angles was studied experimentally. A Drop-on-Demand platform was introduced and three different regimes of droplet formation were observed. The regime map of the droplet formation was presented. A new type of droplet formation evolution was observed in which the droplet is formed while it is swinging around the nozzle, and the satellite droplet is not generated in this regime. The effects of five important parameters including magnetic flux density, applied magnetic frequency, duty cycle, distance between the nozzle and the center of the upper... 

Drop motion on different types of new proposed micro-structure surfaces has been numerically investigated to find the optimum structure in view point of ice formation delaying. The droplet automatically moves on the inclined surfaces due to gravity forces. To validate the numerical algorithm, three different bench mark problems have been considered. The results indicate that the present algorithm is trustable for the presented numerical simulations. Then the validated numerical approach has been used to simulate droplet motion on nine proposed superhydrophobic surfaces in the same conditions. Comparison the drop motion on different micro-structure surfaces at different time indicate that... 

The reactive extraction behavior on the mean drop size and distribution for synergistic extraction of vanadium from sulfate medium with di-(2-ethylhexyl) phosphoric acid (D2EHPA) and its mixture with tributyl phosphate (TBP) in kerosene has been interpreted in the modified rotating disc contactor column. In batch experiments, the maximum extraction efficiency was obtained in the single extraction system with 0.29 molar D2EHPA at an equilibrium pH of 2, whereas the extraction percentage was significantly increased by adding 0.3 molar TBP into the same D2EHPA concentration due to the synergistic effect. The solvent extraction process has been optimized by applying the central composition... 

In this paper, the hydrodynamic behaviour of the chemical reaction system (selenium, tellurium, and TBP) was interpreted in the Oldshue-Rushton extraction column. The optimum operating parameters for extracting the selenium and tellurium from chloride medium were carried out by using the batch experiments. The feed acidity of 5 molar and solvent phase with 20% (v/v) TBP in kerosene were optimised to examine the hydrodynamic parameters of the mentioned column. The impacts of operating variables such as rotor speed, inlet aqueous phase velocity, and inlet solvent phase velocity on the dispersed phase hold-up, mean drop size, slip velocity, drop size distribution, and extraction rate were... 

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

The inflow pattern of liquid into a droplet is studied experimentally using a surface active dye and compared with results of CFD simulations. The results show visual agreement between experiments and simulations. The CFD simulations show also good agreement with the surface tension measured by drop profile analysis tensiometry (PAT). The inflow of the surfactant induces a Marangoni instability caused by the local arrival of the surfactant at the drop surface. The onset of this Marangoni instability observed experimentally has a delay of about 10. s when compared with the simulation results. Different scenarios are discussed, including a boundary layer barrier, a kinetic-controlled... 

It is well known that the displacement efficiency of EOR processes is mainly affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of pores surfaces remains a topic of debate in the literature. Furthermore, a little is known about how the dispersed silica nanoparticles affect the microscopic/macroscopic recovery efficiency of heavy oils during common immiscible EOR processes such as water flooding. In this study, a series of injection experiments was performed on five-spot glass micromodel which is initially saturated with the heavy oil. Distilled water and dispersed silica nanoparticles in water (DSNW) at different values of weight percent... 

Mass-transfer rates to and from drops in liquid-liquid extraction processes are often reduced by the presence of contaminants. To design an industrial extractor, it is essential to consider this contamination effect in a quantitative manner. To achieve this goal, an experimental investigation was conducted on the mass transfer into single drops for n-butanol-succinic acid-water, as the recommended test system by the European Federation of Chemical Engineering (EFCE). The effects of anionic (sodium dodecyl sulfate, SDS), cationic (dodecyl trimethyl ammonium chloride, DTMAC), and nonionic (octylphenol decaethylene glycol ether, Triton X-100) surfactants on the hydrodynamic and mass-transfer... 

It is well known that the oil recovery is affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of medium surfaces has remained a topic of debate in the literature. Furthermore, there is a little information of the way dispersed silica nanoparticles affect the oil recovery efficiency during polymer flooding, especially, when heavy oil is used. In this study, a series of injection experiments were performed in a five-spot glass micromodel after saturation with the heavy oil. Polyacrylamide solution and dispersed silica nanoparticles in polyacrylamide (DSNP) solution were used as injected fluids. The oil recovery as well as fluid distribution in...