Sharif Digital Repository

Although there is extensive experimental, theoretical and numerical research on dynamics of drop formation in liquid-liquid systems, the evaluation of mass transfer during drop formation is rather complex and there has been little research on that. The various mathematical models developed for this problem are generally based on a solution of the diffusion equation without any allowance for circulation within the drop. This is the main reason for the poor prediction of these models in many cases for which internal convection has an important effect on mass transfer rate. In this paper an attempt was made to define a parameter related to the extent of the convective mixing within the growing... 

An experimental investigation of the flow field of pressure swirl atomizers for different pressure drops is performed. Two experimental methods are employed. For low injection pressures, a visual study is conducted while for higher pressures the velocity components and size of the droplets are measured by using Phase Doppler Anemometer. The spray formation, spray cone angle, and breakup length are visually investigated. Velocity and size of the droplets are measured on a plane of measurement along the axis of the spray so that the properties are carried out in a radial direction as a function of both pressure drop and axial distance from the nozzle. Self-similar mean axial velocity profiles... 

Radial Basis Function, a neural network based interpolation method, is used to simulate swirling spray phenomenon. From this model, the profile of mean velocity components' distribution along the main axis of the injector at various pressure drops and spray measurements' plane are obtained and analyzed. Experimental data obtained through Phase Doppler Anemometer is used to train this model. The results are compared with experimental data as well as to those obtained through General Regression Neural Network method as another neural network based interpolation method investigated previously by the authors. © 2003 by M.R. Soltani  

Radiative sky cooling (RSC) systems have enjoyed a privileged position in the research community due to generating cooling energy without consuming electricity using the open atmospheric window and infrared emission to the sky. However, the system's justification occurs when it reaches a temperature below the minimum 24-hour ambient temperature. This study utilizes phase change materials (PCM) as the energy storage of a hybrid daytime photovoltaic-thermal and nighttime RSC module and investigates the nocturnal cooling energy-saving potential of the system at different phase transition temperatures. After being validated by the experimental data in the literature, the simulated model was used... 

Achieving high efficiency and throughput in droplet-based mixing over a small characteristic length, such as microfluidic channels, is one of the crucial parameters in Lab-on-a-Chip (LOC) applications. One solution to achieve efficient mixing is to use active mixers in which an external power source is utilized to mix two fluids. One of these active methods is magnetic micromixers using ferrofluid. In this technique, magnetic nanoparticles are used to make one phase responsive to magnetic force, and then by applying a magnetic field, two fluid phases, one of which is magneto-responsive, will sufficiently mix. In this study, we investigated the effect of the magnetic field’s characteristics... 

In Mixed-Criticality (MC) systems, multiple functions with different levels of criticality are integrated into a common platform in order to meet the intended space, cost, and timing requirements in all criticality levels. To guarantee the correct, and on-time execution of higher criticality tasks in emergency modes, various design-time scheduling policies have been recently presented. These techniques are mostly pessimistic, as the occurrence of worst-case scenario at run-time is a rare event. Nevertheless, they lead to an under-utilized system due to frequent drops of Low-Criticality (LC) tasks, and creation of unused slack times due to the quick execution of high-criticality tasks.... 

Droplet breakup in symmetric T-junctions is one of the important phenomena in droplet microfluidics. Many studies have been done about the droplet breakup but none of them has provided a general analytical solution for the droplet breakup. In this study, we present an analytical solution to investigate the effect of important parameters such as the capillary number, droplet length, and channel widths ratio. The analytical solution is validated using the numerical simulation. Using the analytical equation and numerical results, we propose a generalized relationship. This general equation can be used as a rule of thumb for droplet breakup predictions with high accuracy. The results indicate... 

Droplet microfluidics is a platform of microfluidics in which two immiscible fluids are used to generate droplets for various biomedical applications. This platform introduces several advantages in applications such as cell lysis, cell culture, co-culture, and cell encapsulation. The most important issues regarding droplet generation devices are the fabrication complexity and maintenance of these devices. In this study, a simple and easy-to-fabricate microdroplet generator is designed and fabricated to resolve these issues. Furthermore, since this device is easy to fabricate and use, it can play a key role in the fabrication of medical devices for controlling infectious diseases in poor and... 

Droplet-based microfluidic systems have been employed to manipulate discrete fluid volumes with immiscible phases. Creating the fluid droplets at microscale has led to a paradigm shift in mixing, sorting, encapsulation, sensing, and designing high throughput devices for biomedical applications. Droplet microfluidics has opened many opportunities in microparticle synthesis, molecular detection, diagnostics, drug delivery, and cell biology. In the present review, we first introduce standard methods for droplet generation (i.e. passive and active methods) and discuss the latest examples of emulsification and particle synthesis approaches enabled by microfluidic platforms. Then, the applications... 

The present work is expressed to interpret the hydrodynamic parameters of rotation extraction columns in the reactive and non-reactive systems. The solvent extraction technique has been utilized for optimizing the transportation of molybdenum ions to the organic phase in two agitated columns (ORC and Kühni columns). Dispersed phase volume fraction, average droplet diameter, slip velocity, size distribution, and ions permeability of the aqueous phase have been investigated in terms of changing the operational variables including the agitation rate, flow rate of the inlet dispersed and continuous phases, column geometry, and reaction conditions. By considering the reactive and non-reactive... 

Spontaneous imbibition of water from fracture into the matrix is considered as one of the most important recovery mechanisms in the fractured porous media. However, water cannot spontaneously imbibe into the oil-wet rocks and as a result oil won't be produced, unless the capillary pressure barrier between fracture conduits and matrix is overcome. Wettability alteration is known as the main affecting mechanism for low salinity water flooding (LSWF), however, its effectiveness in fractured porous media has been less investigated, especially in the case of possible pore scale displacement mechanisms. In this study, the effectiveness of LSWF (diluted seawater) on oil recovery is compared to the... 

Minimization of drop contact time is so important and critical for applications such as self-cleaning and anti-corrosion. In recent years, surface acoustic waves are presented as a powerful method for the manipulation of the drops. In this manuscript, a numerical study of drop shedding under the effect of acoustic waves is presented, which may have potential use in the anti-icing systems. Therefore, the effects of different parameters, such as acoustic wave frequency, amplitude, and direction of the wave on the water removal, are investigated. For this purpose, a color gradient lattice Boltzmann method (LBM) is developed and used in these simulations. The acoustic actuator effect is added as... 

In this study, the heat transfer and fluid flow characteristics of a three-dimensional microchannel that is partially filled with a layer of porous medium at its bottom solid wall is investigated. The microchannel is consisted of a clear fluid flow region, solid walls and a porous layer that is attached to its solid bottom wall. A constant heat flux is applied to the bottom wall of the microchannel. Darcy-Brinkman-Forchheimer model is used to simulate the fluid flow inside the porous medium. The novelty of this work is to investigate thoroughly and precisely the effect of using of porous layer configuration in MCHSs on hydraulic and thermal performances. The effect of porous layer thickness,... 

Droplet-based microfluidics is an attractive approach for producing microgels due to its high potential to control the size and shape of the particles and precisely entrap the substances within the hydrogel matrix. However, the microfluidic generation of monodisperse microgels with desired structures is still challenging. Indeed, the rheological and interfacial properties of the immiscible fluids, as well as the adopted gelling strategy, play important roles in microfluidic methods. Herein, sodium alginate droplets with different concentrations are generated via a microfluidic device with a flow-focusing unit. Besides, a combined in situ and ex situ strategy is optimized to crosslink sodium... 

Surfaces with special wettability have aroused lots of attention due to their broad applications in many fields. In this work, we systematically report selective and various fabrications of nanofluids based on readily available materials such as SiO2 nanoparticles and polydimethylsiloxane to create superhydrophobic, superoleophobic, superhydrophilic/superoleophobic, and underwater superoleophobic coatings. The efficiency of prepared coatings is investigated on mineral rock plates as porous substrates via the straightforward and cost-effective solution-immersion technique. The static water contact angle of 170°, effortless bouncing of water droplets, and self-cleaning property with a near... 

In this article, the thermal and hydraulic capacity of a rectangular microchannel heat sink with different trapezoidal porous configuration’s inlet heights (Formula presented.) and outlet heights (Formula presented.) are examined. A three-dimensional model is used for microchannels with miscellaneous trapezoidal porous configuration’s inlet and outlet heights, and the laminar fluid flow and conjugate heat transfer equations are numerically solved. Darcy-Brinkmen-Forchheimer equation is utilized for transport through the porous region. For microchannels with miscellaneous porous distribution’s inlet and outlet heights, the Nusselt number, pressure drop and figure of merit (FOM), a criterion... 

The dynamics and heat transfer performance of droplets play an important role in electrowetting systems. Contrary to the growing trend towards non-Newtonian fluids in electrotechnical systems, most researchers have focused on Newtonian fluids. In the current study, the interface is tracked by the phase-field method and afterwards, the numerical model is confirmed by comparing the results obtained from previous experimental and theoretical works. Several parameters such as power-law index and contact angle are analyzed. Furthermore, the dynamics and heat transfer of the droplets on chemically or topographically structured substrates in the presence of electrowetting are examined. It has been... 

The deformation and breakup dynamics of a compound ferrofluid droplet under shear flow and uniform magnetic field are numerically studied in this paper. Utilizing magnetic field provides the possibility to obtain better control over the compound droplet morphology and breakup in a simple shear flow. To solve the governing equations for interfaces motion and hydrodynamics, the conservative phase field lattice Boltzmann model is employed, and a finite difference approach is applied for calculating the magnetic field. To verify the accuracy of present simulations, the results are validated with those of four relevant benchmarks including liquid lens between two stratified fluids, three-phase... 

In this paper, the hydrodynamic behaviour of the chemical reaction system (selenium, tellurium, and TBP) was interpreted in the Oldshue-Rushton extraction column. The optimum operating parameters for extracting the selenium and tellurium from chloride medium were carried out by using the batch experiments. The feed acidity of 5 molar and solvent phase with 20% (v/v) TBP in kerosene were optimised to examine the hydrodynamic parameters of the mentioned column. The impacts of operating variables such as rotor speed, inlet aqueous phase velocity, and inlet solvent phase velocity on the dispersed phase hold-up, mean drop size, slip velocity, drop size distribution, and extraction rate were... 

Improving the discharge process of phase change materials (PCMs) is of great importance and can be effective for thermal energy storage (TES) systems. In this research, the direct-contact method for acetone droplet on molten paraffin is optimized to enhance the efficiency of the discharge process of PCMs and TES systems working with intermediate boiling fluid (IBF). In order to improve the storage rate and increase the freezing rate in the system, the NSGA-II algorithm is used. When the acetone droplet hits, owing to its low boiling point relative to the temperature of molten paraffin, the acetone evaporates, causing the creation of solidified paraffin area. The main goal of the current...