Sharif Digital Repository

Thermal powerplants report a reduction in their dry cooling tower performances due to surrounding wind drafts. Therefore, it is very important to consider the influence of wind velocity in cooling tower design; especially in geographical points with high wind conditions. In this regard, we use the computational fluid dynamics (CFD) tool and simulate a dry cooling tower in different wind velocities of 0, 5 and 10 m/s. To extend our calculations; we also consider the temperature variation of circulating water through the tower heat exchanger or deltas one-by-one. We show that some heat exchangers around the tower cannot reduce the circulating water temperature sufficiently. This causes an... 

Metal matrix composites (MMCs) have received considerable attention due to their excellent engineering properties. Accuracy and surface finish play an important role in modern industry. Undesired projections of materials, known as burrs, reduce the part quality and negatively affect the assembly process. In this study, reducing burr size in drilling of MMC is performed by adding ultrasonic vibration to the process. Al/SiC p MMC with 5 wt% of SiC particulates in dry drilling operation with HSS drill tools coated with TiN was investigated. The effect of ultrasonic assistance on burr size was studied. The results demonstrate that under suitable ultrasonic vibration conditions, in comparison... 

Calculating leakage inductances between windings of multi-winding Traction transformers is one of the most important schemes in design procedure. In this paper, analytical and finite element methods (FEM) have been introduced for electromagnetic modeling of traction transformers with four pancake split windings. Using these models, the leakage inductances between the split windings are calculated and the models have been validated with the help of experimental data gathered from a typical 4000kVA cast-resin dry-type transformer. Some reformations are employed to improve the FEM results and effects of these reformations on accuracy of the model are studied. Employing the validated models, the... 

The small-strain shear modulus Gmax is a key material parameter in modeling the behavior of soils subjected to dynamic loading. Recent experimental results indicate that seasonal weather interaction with near-surface soils causes Gmax to change by up to an order of magnitude in some climates, with a hysteretic response upon drying and wetting. The increase in Gmax during drying and the stiffer response during subsequent wetting have been postulated to be due to plastic hardening during drying. To further understand this behavior, a series of isotropic compression tests were performed on compacted silt specimens at different values of matric suction to evaluate changes in the preconsolidation... 

Thermal performance of a novel sintered wick heat pipe was investigated in this study. Two types of sintered wick heat pipes were fabricated and tested at different filling ratios of water, and their thermal resistances in different modes were compared. In the first type, wick was sintered annularly (conventional type), and in the other one (novel type of sintered wick) it was sintered only in one third of cross-section. Results showed that dry-out occurs at higher heat input by an increase in the filling ratio. Moreover, the best filling ratio is 20% for both heat pipes. Thermal resistances of the partly sintered wick heat pipe are approximately 28%, 17% and 47% lower than those of the... 

Heat pipes are important cooling devices that are widely used to transfer high heat loads with low temperature differences. In this paper, thermal performance of a novel type of sintered-wick heat pipe, namely, partly sintered-wick heat pipe, was investigated. The heat pipe was filled with degassed water and acetone, as working uids, and effects of filling ratio, orientation, and heat inputs were tested. Moreover, conditions at which dryout occurred were presented. The results showed that the best filling ratio for both working uids is about 20%. The heat pipe filled with water has better thermal performance than that filled with acetone; thus, the thermal resistances of the 20% water-filled... 

The climate change and human development in lake catchments have put these habitats in drying conditions, e.g. Aral Sea in Asia, Lake Chad in Africa, Lake Mead in USA, Lake Urmia in Iran, etc. These ecosystems play an important role in social, ecological, and economic activities. Lake Urmia, recognized as an international wetland in 1973 and located in Iran, which is the second largest hypersaline lake in the world, is in the same state. Lake Urmia biologically and ecologically is one of the most interesting places in the world. This lake is a habitat for various species. The lake's surface has shrunken from 6000 km2 to 900 km2 in 2013. The statistics indicate that the population has... 

Alaboratory testing program was conducted to investigate the effects of microstructure on the water retention curve (WRC) and wetting-drying induced volume change in loess. The axis translation and vapor equilibrium techniques were adopted to control suction in the range of 0-400 kPa and 4-140 MPa, respectively. Hysteresis in the WRC of loess was observed for the entire range of suction studied. Compared to re-compacted loess, intact loess exhibits a more pronounced hysteresis in the suction range below 20 kPa, which can be explained by the ink-bottle pore neck effect or constricted pores. The hypothesis is supported by microstructural evidence of mercury intrusion porosimetry and scanning... 

Surface chemistry of as-received nanodiamond (ND) was first tailored by dry thermal oxidation to obtain carboxylated ND (ND-COOH) and by wet chemistry to obtain ethylenediamine-functionalized ND (ND-EDA). Then, the surface-functionalized ND particles were dispersed in polyamide 6 (PA6) using the melt-mixing method. Transmission optical and scanning electron microscopies indicated a fine dispersion at low nanodiamond concentrations, e.g. 0.25 wt%, particularly with ND-EDA. Differential scanning calorimetry revealed that ND-EDA favoured the α-phase crystal and enhanced the degree of crystallinity of PA6. Experimental data indicated that ND-EDA had considerably improved tensile properties at... 

The effect of Solid State Fermentation (SSF) on Chitosan production by A. niger was investigated. A. niger BBRC 20004 from Biochemical and Bioenvironmental Research Centre of Sharif University of Technology (Tehran, Iran), was grown on corn residue. Chitosan was extracted from the fungal mycelia using hot alkaline and acid treatment. A. niger was incubated for 12 days on corn residue with moisture content of 35 % and 1.12 % of nitrogen. The Chitosan was obtained and 10.9 g/kg of Urea dry residue was added in various amounts to the medium in order to evaluate the effect of the nitrogen concentration in the production of Chitosan. The highest amount of Chitosan obtained by 6.5 g of urea after... 

WC-Co cemented carbides, including small angular tungsten carbides particles, are used extensively to improve wear resistance. Some additives can affect mechanical and wear properties of these materials. In this study, the effect of VC and (Ta, Nb)C content on wear of WC- 10Co were considered. The tests were performed at normal load of 230 N and sliding distance of 800 m up to 3200 m. Wear tests were carried out using dry sand/rubber wheel apparatus. Wear rate, standard and modified wear coefficients were calculated. The microstructures of prepared specimens were examined by optical microscopy. The morphological analysis of the worn surfaces was made by SEM. The results show that VC content... 

The potential utilization of encapsulation techniques in food, pharmaceutical and agricultural products preparation, presents a new alternative for complementary technologies such as targeting delivery vehicles and carriers for active food ingredients. Encapsulation could be accomplished by different techniques like: simple or complex coacervation, emulsification technique, phase separation, spray drying, spray chilling or spray cooling, extrusion coating, freeze drying, fluidized-bed coating, liposomal entrapment, centrifugal suspension separation, co-crystallization and molecular inclusion complexation. Encapsulation is a method by which one bioactive material or mixture of materials is... 

Supersonic separators (3Ss) are applied in gas separation processes. Two-dimensional simulation is employed to investigate the effect of operational and thermophysical parameters on the shockwave position. In addition, the impact of the cyclonic part and wet outlet geometry is evaluated by proposing four cases. Increasing the length of the cyclonic part exerts positive and negative influences on the performance of the 3S and the pressure recovery coefficient, respectively. The optimum length is determined between 10 and 15 cm. To demonstrate negative effects of wasted air from the wet outlet, its flow has been increased from 3.6 to 8.1 % of the inlet flow. Improved performance of the 3S is... 

The effect of moisture on Shengli lignite breakage behavior and energy efficiency was studied experimentally using a standard Hardgrove mill fitted with a wattmeter. The grinding process concerned both the inputs, namely the occurrence and content of water and instantaneous energy consumption and the outputs, size-reduction and product fineness. Results show that the energy-size reduction process for grinding lignite is markedly influenced by moisture occurrence and content. Removing surface moisture from 37.90% to 16.61% (the air-dried condition) resulted in a slight increase of input energy by 0.04 kWh.t−1 per 10 s. However, with further drying inherent moisture to 0%, the consumed energy... 

Real-time measurement of soil water pressure has been recognized as an essential part of investigating water ow in unsaturated soils. Tensiometry, amongst different measuring techniques, is a common method for direct evaluation of water pressure. However, the lower limit of measurable water pressure by a conventional tensiometer becomes even more limited by increasing its length in the vertical installation. This paper describes the development of a Vacuum-Refilled Tensiometer (VRT) for monitoring soil water pressure independent of installation depth. This is achieved by fixing the distance between pressure sensor and ceramic cup together with incorporating an ancillary vacuumre filling... 

Water shortage is the main limitation for agricultural production in many parts of the world. Drought or unavailability of water may seriously limit plant growth as well as yield. A pot experiment was carried out to evaluate the effects of various irrigation strategies, i.e., Full (FI), deficit (DI) and partial root-zone drying (PRD) on physiological, biochemical and yield-related attributes of cotton crop. Irrigation treatments started 60 days after planting and lasted for 60 days. For FI and DI, 100% and 50% of evapotranspiration (ET) was replaced by irrigating the entire pot surface every 4–5 days. For PRD, root system was split into two equal halves and during each irrigation event, only... 

In this contribution, NiO-MgO-SiO2 catalyst was prepared and calcined at different temperatures of 500, 600, 700 and 800 °C. The resulting samples were characterized by BET-BJH, XRD, TPX, CO-chemisorption, EDS and SEM analyses. These were employed toward syngas production via propane dry reforming. The increment in the calcination temperature from 500 to 800 °C decreased the basicity of the catalysts. In addition, the active surface area and Ni dispersion were gradually declined by increasing the calcination temperature from 600 to 700 °C due to active metal sintering during the activation process. The calcined sample at 600 °C displayed the highest propane and CO2 conversions of 93% and 78%... 

An integrated approach is presented for predicting granule particle size using Partial Correlation (PC) analysis and Artificial Neural Networks (ANNs). In this approach, the proposed model is an abstract form from the ANN model, which intends to reduce model complexity via reducing the dimension of the input set and consequently improving the generalization capability of the model. This study involves comparing the capability of the proposed model in predicting granule particle size with those obtained from ANN and Multi Linear Regression models, with respect to some indicators. The numerical results confirm the superiority of the proposed model over the others in the prediction of granule... 

Sol was prepared by the mixing of tetra-η-butyle titanat, ethyl aceto acetate, and ethanol in an optimized condition. Polished 316L specimens were coated with the sol by dip-coating method. The influences of drying condition, withdrawal speed, calcination temperature, addition of dispersant, and pH of sol on TiO2 nanostructure coating were investigated. Choosing of alcohol as drying atmosphere hindered the crack formation. The relation between coating thickness and withdrawal speed was evaluated. The optimum temperature to create a uniform distribution of nanoparticles of anatase was derived as 400 °C. Average roughness of coating was found about 10.61 nm by AFM analysis. Dispersant addition...