Sharif Digital Repository

The hot workability of a wrought 49.8 Ni-50.2 Ti (at pct) alloy was assessed using the hot compression tests in temperature range of 700-1000°C, strain rate of 0.001-1s-1, and the total strain of 0.7. The constitutive equations of Arrhenius-type hyperbolic-sine function was used to describe the flow stress as a function of strain rate and temperature. The preferable regions for hot workability of the alloy were achieved at Z (Zener-Holloman parameter) values of about 109-1013 corresponding to the peak efficiency of 20-30% in the processing map. However, a narrow area in the processing map including the deformation temperature of 1000°C and strain rate of 1s-1 is inconsistent with the related... 

In the present work we studied the use of a membrane contactor system for simultaneous absorption of H2S and CO2 from a gas mixture similar to natural gas. MDEA solution and mixtures of MDEA/DEA and MDEA/MEA were used as absorbent liquid. PVDF and PSf hollow fiber membranes were used in the membrane contactor modules. Design of experiments were carried out by Taguchi method in a manner that a systematical investigation of the effect of operational parameters (temperature, pressure, gas and liquid flow rates, absorbent concentration and acid gas content of the feed), in addition to the effect of membrane material and absorbent liquid, was implemented on process performance parameters... 

Enzymatic decolorization of reactive blue 221 (RB221) using laccase was investigated in a dual-chamber microbial fuel cell (MFC). Suspended laccase was used in the cathode chamber in the absence of any mediators in order to decolorize RB221 and also improve oxygen reduction reaction in the cathode. Molasses was utilized as low cost and high strength energy source in the anode chamber. The capability of MFC for simultaneous molasses and dye removal was investigated. A decolorization efficiency of 87% was achieved in the cathode chamber and 84% COD removal for molasses was observed in the anode chamber. Laccase could catalyze the removal of RB221 and had positive effect on MFC performance as... 

It is well known that the oil recovery is affected by wettability of porous medium; however, the role of nanoparticles on wettability alteration of medium surfaces has remained a topic of debate in the literature. Furthermore, there is a little information of the way dispersed silica nanoparticles affect the oil recovery efficiency during polymer flooding, especially, when heavy oil is used. In this study, a series of injection experiments were performed in a five-spot glass micromodel after saturation with the heavy oil. Polyacrylamide solution and dispersed silica nanoparticles in polyacrylamide (DSNP) solution were used as injected fluids. The oil recovery as well as fluid distribution in... 

In the recent decades, cleanrooms have found growing applications in broad range of industries such as pharmacy and microelectronics. Concerns about negative effects of the contaminant exposure on the human health and product quality motivate many researchers towards understanding of the airflow and contaminant distribution though these environments. With an improvement in computational capacity of the computers, computational fluid dynamics (CFD) technique has become a powerful tool to study the engineering problems including indoor air quality (IAQ). In this research, indoor airflow in a full-scale cleanroom is investigated numerically using Eulerian-Eulerian approach. To evaluate the... 

Importance of power dissipation in NoCs, along with power reduction capability of on-chip optical interconnects, offers optical network-on-chip as a new technology solution for on-chip interconnects. In this paper, we extract analytical models for data transmission delay, power consumption, and energy dissipation of optical and traditional NoCs. Utilizing extracted models, we compare optical NoC with electrical one and calculate lower bound limit on the optical link length below which optical on-chip network loses its efficiency. Based on this constraint, we propose a novel hierarchical on-chip network architecture, named as H2NoC, which benefits from optical transmissions in large scale... 

There are increasing evidences that adjusting the chemistry of the injecting water improves the oil recovery efficiency. However, the underlying mechanisms for this technique which is referred to as "smart waterflood" have not yet been thoroughly understood. It is needed to explore the role of individual ions through set of different tests, to find the right mechanisms behind "smart waterflood". This study is focused on the fluid/solid (carbonate) interactions through systematic wettability measurement. Contact angle measurements accompanied by spontaneous imbibition tests were employed to determine the role of individual monovalent and divalent ions in wettability alteration process by... 

Different structures of TiO2 photoelectrodes were fabricated with various arrangement modes of the layers. TiO2 nanoparticles were synthesized by a combination of sol–gel and solvothermal methods and were employed as the active layer of solar cells. Hierarchical TiO2 spheres (HTS) and spherical TiO2 particles (STP) were also prepared by hydrothermal and sol–gel processes, respectively, and used as the scattering layer of solar cells. Field emission scanning electron microscope and X-ray diffraction analyses revealed that all synthesized morphologies showed anatase structure with particle size around 20, 200–400 nm and 1.5–2.0 µm for the... 

The light scattering, harvesting and adsorption effects in dye-sensitized solar cells (DSSCs) are studied by preparation of coated carbon nanotubes (CNTs) with TiO2 and Zr-doped TiO2 nanoparticles in the forms of mono- and double-layer cells. X-ray diffraction (XRD) analysis reveals that the phase composition of Zr-doped TiO2 electrode is a mixture of anatase and rutile phases with major rutile content, whereas it is the same mixture with major anatase content for coated CNTs with TiO2. Furthermore, the average crystallite size of Zr-doped TiO2 electrode is slightly decreased with Zr introduction. Field emission scanning electron... 

Abstract In a recent work, Alizadeh et al. (2013) studied a capacitated multi-facility location-allocation problem in which customers had stochastic demands based on the Bernoulli distribution function. Authors considered capacitated sub-sources of facilities to satisfy customer demands. In this discrete stochastic problem, the goal was to find optimal locations of facilities among candidate locations and optimal allocations of existing customers to operating facilities so that the total sum of fixed costs of operating facilities, allocation costs of customers and expected values of servicing and outsourcing costs was minimized. The model was formulated as a mixed-integer nonlinear... 

Copper and cobalt oxides supported on almond shell derived activated carbon (AC) with different loadings were synthesized by sequential and co-deposition-precipitation methods leading to Cu(shell)/Co(core)/AC, Co(shell)/Cu(core)/AC and Cu-Co(mixed)/AC catalysts that were subsequently used for catalytic oxidation of gaseous mixtures of toluene and cyclohexane in air in a tubular flow reactor. The catalysts and the support were characterized by Boehm test, Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy... 

Recently, hybrid graphene–quantum dot systems have attracted increasing attention for the next-generation optoelectronic devices such as ultrafast photo-detectors and solar energy harvesting. In this paper, a novel, one-step, reproducible, and solution-processed method is introduced to prepare hybrid graphene–PbS colloids by employing supercritical ethanol. In the hybrid nanocomposite, PbS quantum dots (~3 nm) are decorated on the reduced graphene oxide (rGO) nanosheets (~1 nm thickness and less than 1 micron lengths). By employing X-ray photoelectron and Raman and infrared spectroscopy techniques, it is shown that the rGO nanosheets are bonded to PbS nanocrystals through carboxylic bonds.... 

Hollow microblocks of [Zn(anic)2], as a novel coordination compound, were synthesized using 2-aminonicotinic acid (Hanic) and zinc (II) nitrate tetrahydrate. The chemical composition of the zinc complex, ZnC12H10N4O4, was determined by Fourier transform infrared (FTIR) spectroscopy and elemental analysis. The synthesized zinc complex was used as a precursor to produce ZnO nanostructures by calcination at 550 °C for 4 h. Morphological studies by scanning electron microscopy and transmission electron microscopy revealed the formation of porous microbricks of ZnO nanoparticles. N2 adsorption-desorption analysis showed that the... 

Locally multipath adaptive routing (LMAR) protocol, classified as a new reactive distance vector routing protocol for MANETs is proposed in this paper. LMAR can find an ad-hoc path without selfish nodes and wormholes using a random search algorithm in polynomial-time. Also when the primary path fails, it discovers an alternative safe path if network graph remains connected after eliminating selfish/malicious nodes. The main feature of LMAR to seek safe route free of selfish and malicious nodes in polynomial time is its searching algorithm and flooding stage that its generated traffic is equiloaded compared to single-path routing protocols but its ability to bypass the attacks is much better... 

LLC resonant converter has been used widely as dc-dc converter for achieving constant dc voltage. In this paper, an LLC resonant converter, by adding an inductance to its conventional topology and considering the rectifying stage stray inductances, is proposed for an adjustable wide range regulated current source (20-200 A dc) for using as ion implanter's filament power supply. The additional inductor increases output current adjustment range and efficiency, especially at light loads. Transformer's leakage inductances and rectifying stage stray inductances have been considered. Because of these inductances, the rectifier stage always works in continuous conduction mode, and its conduction... 

Capacitor placement/setting is one of the main means for loss reduction and voltage profile improvement in distribution systems. If capacitor placement is meant, the objective function will be the cost of energy losses besides the capacitors costs in a specified period of time. Here, reconfiguration can be used as a strategy to reform the base configuration of the distribution network in order to place the capacitors more efficiently with lower costs. On the other hand, if capacitors are already available in a network, optimum capacitors setting and network reconfiguration should be performed for power loss minimization. In this paper both power loss minimization and capacitor placement cost... 

The amount of residual oil trapped in the matrix of a fractured reservoir after water drive, either natural water drive or water injection, depends on the wettability of the matrix rocks. Gas oil gravity drainage (GOGD) has been proposed as the tertiary oil recovery process for this type of oil reservoir. The current work focuses on experimental investigation of tertiary GOGD in fractured porous media under different types of matrix wettability. Results of a set of experiments performed in artificial porous media composed of sand packs and glass beads of different wettability have been used to check the GOGD rate and the ultimate oil recovery for previously waterflooded models. A novel... 

In this paper we investigate multi-path transmission of video over Wireless Multimedia Sensor Networks (WMSNs). Our objective is to provide a transmission mechanism to improve the video quality perceived at the receiver while considering energy, bandwidth and delay constraints of the network. Our approach is based on packet and path priority scheduling in multipath video transmission over WMSN. Video packets are classified according to their types and more important packets are transmitted through paths with better conditions. Path conditions are evaluated by a score mechanism using variant parameters such as free buffer size, energy, hop count and packet loss. Since path conditions are... 

A gas-turbine cogeneration system with a regenerative air preheater and a single-pressure exhaust gas boiler serves as an example for application of CHP Plant. This CHP plant which can provide 30 MW of electric power and 14kg/s saturated steam at 20 bars. The plant is comprised of a gas turbine, air compressor, combustion chamber, and air pre-heater as well as a heat recovery steam generator (HRSG). The design Parameters of the plant, were chosen as: compressor pressure ratio (rc), compressor isentropic efficiency (ηac), gas turbine isentropic efficiency (ηgt), combustion chamber inlet temperature (T3), and turbine inlet temperature (T4). In order to optimally find the design parameters a... 

In this paper, a micro-polar continuum model is presented based on the Cosserat theory for 3D modeling of localization phenomena. Since the classical continuum model suffers from the pathological mesh-dependence in strain localization problem, the governing equations are regularized by adding the rotational degrees-of-freedom to conventional degrees-of-freedom. The fundamental relations in three-dimensional Cosserat continuum are presented and the internal length parameters are introduced in the elasto-plastic constitutive matrix to control the shear bandwidth. The mesh independency of Cosserat model in strain-softening problem is verified and the effect of internal parameters is...