Sharif Digital Repository

Tape mechanisms must be able to transport the tape with a constant velocity for achieving high rate of data transfer. In this paper, a multivariable model of tape transport mechanism including the take-up and supply reel servos for tape tension control and capstan servo for speed control is considered. To achieve desired performance,pole-placement approach based on general canonical control form (GCCF) is used. Instead of using expensive tension sensors, an observer is designed. A regulator system is developed for disturbance rejection; and a modified integral control is designed for perfect tracking of desired setpoints in tape speed and tensions. Since the real dynamic model associates... 

Tape mechanisms must be able to transport the tape with a constant velocity for achieving high rate of data transfer. In this paper, a multivariable model of tape transport mechanism including the take-up and supply reel servos for tape tension control and capstan servo for speed control is considered. To achieve desired performance,pole-placement approach based on general canonical control form (GCCF) is used. Instead of using expensive tension sensors, an observer is designed. A regulator system is developed for disturbance rejection; and a modified integral control is designed for perfect tracking of desired setpoints in tape speed and tensions. Since the real dynamic model associates... 

Synchronizability of dynamical networks can be defined as the ease by which the network synchronizes its activity. We propose a method for enhancing the synchronizability of dynamical networks by efficient rewirings. The method is based on the eigenvectors corresponding to the second smallest and the largest eigenvalue of the Laplacian matrix and a modified version of the simulated annealing approach is used to perform the optimization task. Starting from a simple network, i.e. an undirected and unweighted network, and at each step, an edge is selected for disconnection and two non-adjacent nodes for creating at edge in between. The effectiveness of the algorithm is tested on artificially... 

The response of a suspended cables subjected to narrow-band random excitations with two types of peaked P.S.D. is formulated and analyzed. Banach fixed-point theorem is used for eigenfunction analysis of the differential-integral equations of motion for the first time in this paper. Fredholm approach also is used in the free vibration analysis of the suspended cable and then using Galerkin mode approximation method, power spectral density, and root mean square of the response are computed for two practical types of excitation. All of the calculated results converted to dimensionless quantities make their usage easier in vibration analysis of some practical cases such as vibration of moving... 

Elastic stability of shell structures under certain loading conditions is characterized by a dramatically unstable postbuckling behavior. The presence of simultaneous 'competing' buckling modes (corresponding to the same critical buckling load) is understood to be largely responsible for such behavior. In this paper, within the framework of linear bifurcation eigenvalue analysis and Donnell shallow shell theory, the presence of simultaneous buckling modes in axially compressed isotropic cones is determined using the semi-analytical method of Galerkin. The results are presented in the plane of the dimensionless reciprocal meridional and circumferential buckling half wavelengths, and are... 

A new reduced-order modeling approach is presented. This approach is based on fluid eigenmodes and without using the static correction. The vortex lattice method is used to analyze unsteady flows over two-dimensional airfoils and three-dimensional wings. Eigenanalysis and reduced-order modeling are performed using a conventional method with and without the static correction technique. In addition to the conventional method, eigenanalysis and reduced-order modeling are also performed using the new proposed method, that is, without static correction requirement. Numerical examples are presented to demonstrate the accuracy and computational efficiency of the proposed method. Based on the... 

Singular spectrum analysis (SSA) is a well-studied approach in signal processing. SSA has originally been designed to extract information from short noisy chaotic time series and to enhance the signal-to-noise ratio. SSA is good for offline applications; however, many applications, such as modelling, analysis, and prediction of time-varying and non-stationary time series, demand for online analysis. This study introduces a recursive algorithm called recursive SSA as a modification to regular SSA for dynamic and online applications. The proposed method is based on eigenvector matrix perturbation approach. After recursively calculating the covariance matrix of the trajectory matrix, R-SSA... 

In this paper, we argue that in many basic algorithms for machine learning, including support vector machine (SVM) for classification, principal component analysis (PCA) for dimensionality reduction, and regression for dependency estimation, we need the inner products of the data samples, rather than the data samples themselves.Motivated by the above observation, we introduce the problem of private inner product retrieval for distributed machine learning, where we have a system including a database of some files, duplicated across some non-colluding servers. A user intends to retrieve a subset of specific size of the set of the inner product of every pair of data items in the database with... 

Planar grating diffraction analysis based on Legendre expansion of electromagnetic fields is reported. In contrast to conventional RCWA in which the solution is obtained using state variables representation of the coupled wave amplitudes; here, the solution is expanded in terms of Legendre polynomials. This approach, without facing the problem of numerical instability and inevitable round off errors, yields well-behaved algebraic equations for deriving diffraction efficiencies, and can be employed for analysis of different types of gratings. Thanks to the recursive properties of Legendre polynomials, for longitudinally inhomogeneous gratings, wherein differential equations with non-constant... 

A novel approach for photonic crystals devices analysis, based on perturbation theory is reported. In this method the photonic crystal device is considered as the superposition of a parent lattice and a perturbing one. Then the solution is investigated in terms of the eigensolutions of the parent lattice. This way, one can easily obtain analytic expressions within the first order perturbation, describing the effects of different parameters on the eigensolutions of the structure. The perturbation theory employed in this work is typical of what is conventionally used in quantum mechanics literature. The proposed method is explicit, works fast, and does not involve complicated numerical... 

To achieve high rate of data transfer, tape mechanisms must be able to transport the tape with a constant velocity for scanning. During this process, it is desired to make the rise time minimized without timing and data transfer errors. In this paper, three servo systems including the take-up and supply reel servos for tape tension control and capstan servo for speed control are considered. So, tape transport mechanisms can be described with a nonlinear multi-input multi-output system (MIMO). After state-space representation of the problem, feedback control is designed for tracking objective. It should be mentioned that an increase in the speed of time response of system corresponds to an... 

To achieve high rate of data transfer, tape mechanisms must be able to transport the tape with a constant velocity for scanning. During this process, it is desired to make the rise time minimized without timing and data transfer errors. In this paper, three servo systems including the take-up and supply reel servos for tape tension control and capstan servo for speed control are considered. So, tape transport mechanisms can be described with a nonlinear multi-input multi-output system (MIMO). After state-space representation of the problem, feedback control is designed for tracking objective. It should be mentioned that an increase in the speed of time response of system corresponds to an... 

Employing an admittance representation in the form of a black box model approximated by rational functions for linear power system components or network equivalents to be included in electromagnetic transient studies is a well-known method which improves calculation efficiency. All of the methods that have been proposed to solve the rational approximation problem have made efforts to overcome the problem of preserving the passivity of the final model. Passivity is a vital property, since a non-passive model may lead to an unstable transient simulation in the time domain. In this paper a post-processing technique for passivity enforcement through an iterative process for the detection and... 

The governing differential equation of motion of a thin rectangular plate excited by a moving mass is considered. The moving mass is traversing on the plate's surface at arbitrary trajectories. Eigenfunction expansion method is employed to solve the constitutive equation of motion for various boundary conditions. Approximate and exact expressions of the inertial effects are adopted for the problem formulation. In the approximate formulation, only the vertical acceleration component of the moving mass is considered while in the exact formulation all the convective acceleration components are included in the problem formulation as well. Parametric studies are carried out to investigate the... 

In this study, we are proposing a novel nonlinear classification approach to discriminate between Alzheimer's Disease (AD) and a control group using T1-weighted and T2- weighted Magnetic Resonance Images (MRI's) of brain. Since T1-weighted images and T2-weighted images have inherent physical differences, obviously each of them has its own particular medical data and hence, we extracted some specific features from each. Then the variations of the relevant eigenvalues of the extracted features were tracked to pick up the most informative ones. The final features were assigned to two parallel systems to be nonlinearly categorized. Considering the fact that AD defects the white and gray regions... 

When applying the equivalent inclusion method (EIM) to a composite material with non-dilute distribution of reinforcement particles, due to the complex interaction between the particles, the homogenizing eigenstrain field will in general be highly nonlinear. The interaction becomes more complex, when the reinforcements are multi-phase particles, i.e., the core inhomogeneity is surrounded by many layers of coatings. In this paper, a treatment for an accurate determination of the distribution of homogenizing eigenstrain fields corresponding to composites with non-dilute periodic distribution of multi-phase reinforcement particles is given. The proposed method is applicable to problems, where... 

Because of the complicated buckling characteristics of Y-shaped bracings, calculation of their strength is beyond routine engineering procedures. A method based on slope-deflection equations incorporating stability functions has been used for computation of buckling eigenvalues and effective length factors. Lateral strength is computed based on the least buckling strength of bracing members. This study is limited to bracings with similar sections and fixed end connections resisting out-of-plane rotation. Lateral strengths predicted by the analytical method for two cases are compared with experimental results on full-scale specimens. It is shown that the proposed analytical method predicts... 

A generalized Hubbard model based on a molecular approach is used to calculate many electron wavefunctions of diamond vacancies. We have calculated the oscillator strength of the dipole transition rates from the ground states of the neutral and negatively charged vacancies. The ratio of the oscillator strengths is in very good quantitative agreement with the reported optical spectroscopic data. Electronic configurations in the ground and dipole allowed excited states are presented. With the proposed picture, the much larger oscillator strength of the negatively charged vacancy with respect to other experimentally investigated color centers N-V, H3, X3 and H4 is explained  

Controlling networked structures has many applications in science and engineering. In this paper, we consider the problem of pinning control (pinning the dynamics into the reference state), and optimally placing the driver nodes, i.e., the nodes to which the control signal is fed. Considering the local controllability concept, a metric based on the eigenvalues of the Laplacian matrix is taken into account as a measure of controllability. We show that the proposed optimal placement strategy considerably outperforms heuristic methods including choosing hub nodes with high degree or betweenness centrality as drivers. We also study properties of optimal drivers in terms of various centrality... 

We consider the problem of distributing two conducting materials in a ball with xed proportion in order to minimize the rst eigenvalue of a Dirichlet operator. It was conjectured that the optimal distribution consists of putting the material with the highest conductivity in a ball around the center. In this paper, we show that the conjecture is false for all dimensions greater than or equal to two