Sharif Digital Repository

Carbon nanotubes (CNTs) with and without end caps may be used for fluid storage and transport, respectively, referred to as CNT-nanovessel and CNT-nanopipe. The determination of the stiffness in the hoop (circumferential) and radial directions, ideal hoop strength, and hoop stress-strain curve of such nanostructures is of particular interest. Due to the proposed viewpoint, a chiral free-standing single-walled CNT (SWCNT) has a natural angle of twist and natural extension along the axis of the tube. For example, for the SWCNT (9,3) with diameter of 0.85 nm and chirality angle of 13.9°, the natural angle of twist per unit length is 1.45×10-3 rad/nm. Previously, only Vercosa et al. (2010) who... 

In the present work, graphene oxide (GO) and reduced graphene oxide (RGO) were incorporated at low-density polyethylene (LDPE)/ethylene vinyl acetate (EVA) copolymer blend using solution casting method. Monolayer GO with 1-nm thickness and good transparency was synthesized using the well-known Hummers's method. Fourier transform infrared and X-ray photoelectron spectroscopy data exhibited efficient reduction of GO with almost high C/O ratio of RGO. Scanning electron microscopy showed the well distribution of GO and RGO within LDPE/EVA polymer matrix. The integrating effects of GO and RGO on mechanical and gas permeability of prepared films were examined. Young's modulus of nanocomposites are... 

Nonlinear vibration of a microbeam actuated by a suddenly applied voltage with considering the effect of voltage distribution on the beam due to electrical resistivity of beam is investigated. Homotopy perturbation method is implemented to solve the coupled nonlinear partial differential equations of motion. The vibration frequency variation and damping at various resistivities is studied. Considering resistivity, effect of applied voltage and beam length on the frequency shift and damping ratio is analyzed. Findings indicate there exists a jump in frequency shift and damping ratio at a critical resistivity. Variation of critical resistivity with respect to modulus of elasticity and beam... 

We have studied the mechanical properties of a few-layer graphene cantilever (FLGC) using atomic force microscopy (AFM). The mechanical properties of the suspended FLGC over an open hole have been derived from the AFM data. Force displacement curves using the Derjaguin-Müller-Toporov (DMT) and the massless cantilever beam models yield a Young modulus of Ec ∼ 37, Ea ∼ 0.7TPa and a Hamakar constant of ∼ 3 × 10 -18J. The threshold force to shear the FLGC was determined from a breaking force and modeling. In addition, we studied a graphene nanoribbon (GNR), which is a system similar to the FLGC; using density functional theory (DFT). The in-plane Young's modulus for the GNRs were calculated from... 

A new study is conducted with the aid of molecular dynamics (MD) simulation to investigate the effect of shear modulus value of the interlayer van der Waals (vdWs) interactions on free vibration of cantilever multi-layer graphene nanoribbons (MLGNRs). The corresponding calibrated nonlocal parameters of the nonlocal model are obtained accordingly. The vdWs interactions are treated as the cores between every two adjacent graphene layers and their equivalent shear modulus is calculated using MD simulation. The obtained resonant frequencies via the nonlocal sandwich model are compared to the MD simulation results to calibrate the nonlocal parameter. Results reveal a strong conclusion that the... 

Molecular dynamics simulations are employed to investigate material properties of nanocrystalline aluminum and nanocrystalline Al/Ni multilayers at low temperature. For this purpose, both single crystal and nanocrystalline multilayers with different grain sizes and grain morphology are used as the substrate. The results of the simulations show that hardness and elastic modulus decrease with refinement of grain size in nanocrystalline aluminum and refinement of grain size and layer thickness in nanocrystalline Al/Ni multilayers, regardless of grain morphology. Furthermore, the angle between two adjacent grains, which is directly connected to the grain boundary thickness, has a great influence... 

In this study, we reported the preparation of self cross-linked oxidized alginate-gelatin hydrogels for muscle tissue engineering. The effect of oxidation degree (OD) and oxidized alginate/gelatin (OA/GEL) weight ratio were examined and the results showed that in the constant OA/GEL weight ratio, both cross-linking density and Young's modulus enhanced by increasing OD due to increment of aldehyde groups. Furthermore, the degradation rate was increased with increasing OD probably due to decrement in alginate molecular weight during oxidation reaction facilitated degradation of alginate chains. MTT cytotoxicity assays performed on Wharton's Jelly-derived umbilical cord mesenchymal stem cells... 

Soils are usually weak in tension therefore different materials such as geosynthetics are used to address this inadequacy. Worldwide annual consumption of geosynthetics is close to 1000 million m2, and the value of these materials is probably close to US$1500 million. Since the total cost of the construction is at least four or five times the cost of the geosynthetic itself, the impact of these materials on civil engineering construction is very large indeed. Nevertheless, there are several significant problems associated with geosynthetics, such as creep, low modulus of elasticity, and susceptibility to aggressive environment. Carbon fiber reinforced polymer (CFRP) was introduced over two... 

The seismic response of soil depends on proper evaluation and use of soil dynamic properties, including shear modulus and damping ratio at various strain levels. Despite extensive studies on the shear modulus and damping ratio of saturated soils, research on the dynamic properties of unsaturated fine-grained soils — especially at high suction — is limited. This study aims to investigate the dynamic properties of loess at a variety of initial states resulting from different specimen preparation techniques (reconstituted, recompacted, and intact) and their evolutions due to suction-induced desiccation. Results of resonant column tests show that at initial states, the specimen preparation... 

Progress in tissue engineering and regenerative medicine necessitates the use of novel materials with promising bio-surface for biomedical applications. In this work, TixNy thin films are applied on biological TC4 substrates in a mixed atmosphere of Ar and N2 via magnetron sputtering system for the protection of TC4 alloy. The effects of N/Ti ratio on the phase structure, growth orientation, contact angle, and the mechanical and corrosion performances of thin films are discussed by implementation of composition-microstructure-property interrelationships. The phase structure of TixNy thin films is changed from amorphous-like to single phase Ti2N structure with increasing N/Ti ratio. In the... 

In this study, collagen/chitosan membrane used for guided bone regeneration (GBR) was modified. Collagen and chitosan are routinely used in GBR membrane fabrication. In addition advanced platelet rich fibrin (A-PRF) is a promising substitution for fabricating membrane in dental surgery. Herein, acid soluble collagen from calf skin was extracted and characterized. The combination of A-PRF with collagen/chitosan membrane was investigated in this study. FTIR analysis revealed that chemical crosslinking using EDC/NHS was occurred. The morphology of collagen/chitosan membrane in a gradient manner of chitosan was assessed via SEM images. Response surface methodology (RSM) was used to... 

Accurate estimation of the in-plane shear modulus of solids reinforced by nano-/micro-size elliptical multi-coated fibers is the focus of this paper. It is well-known that at the scales comparable to the nanoscopic length scales of the material, traditional theory of elasticity ceases to hold and, moreover, due to lack of consideration of such length scales has an innate weakness of sensing the size effect. Therefore, it is proposed to formulate and calculate the effective shear modulus of the nano-/micro-composite within micropolar theory which introduces two material characteristic lengths into the field equations. For this purpose, Mori-Tanaka theory is extended to treat nested... 

A new polymer gel nanocomposite is fabricated for excess water production control (water shut off) in petroleum reservoirs and its rheological behavior is evaluated in the presence of sea water and formation water at the temperature of 100 °C. It is shown that at a high salinity without using SiO2 nanoparticles, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water are 12.5 Pa and 9.8 Pa respectively. However by incorporation of SiO2 nanoparticles in the polymer gel matrix, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water can be improved to 13.56 Pa and 11.57 Pa respectively, which is quite interesting... 

In this study, novel chitosan/poly(vinyl alcohol) (PVA)/SiO2 nanocomposite ENMs were prepared to improve the mechanical strength and permeation properties of ENMs. The effect of various concentrations of SiO2 in the spinning solution (0, 0.5, 1.0 and 2.0 wt %) on the morphology, fiber diameter, porosity, thermomechanical properties, and permeability of the synthesized membranes was investigated. The prepared affinity membranes were utilized for the removal of dye from colored wastewater. Incorporating SiO2, as a reinforcing agent, was found to increase the compaction resistance of the nanocomposite ENMs. With the addition of 0.5 wt % of SiO2, the Young's modulus of the prepared membranes... 

It is generally accepted that a hydraulically induced fracture in the reservoir is approximately a plane fracture perpendicular to the direction of the in situ minor principal stress. However, field observations, in some cases, do not support the above traditional assumption. This is especially true when hydraulic fracturing technique is applied to the uncemented porous materials such as oil sands. In this article, the pattern of hydraulically induced fractures in oil sands and other geomaterials is discussed. Field observations and experimental investigation results are combined with the outcomes of the numerical simulations of hydro-fracturing in oil sands conducted by the authors to... 

It is well-known that classical continuum theory has certain deficiencies in predicting material's behavior at the micro- and nanoscales, where the size effect is not negligible. Higher order continuum theories introduce new material constants into the formulation, making the interpretation of the size effect possible. One famous version of these theories is the couple stress theory, invoked to study the anti-plane problems of the elliptic inhomogeneities and inclusions in the present work. The formulation in elliptic coordinates leads to an exact series solution involving Mathieu functions. Subsequently, the elastic fields of a single inhomogeneity in conjunction with the Mori-Tanaka theory... 

Exact solutions for nonlinear composites undergoing finite deformation are in general difficult to find. In this article, such a solution is obtained for a two-phase composite reinforced with elliptic fibers under anti-plane shear. The analysis is based on the theory of hyperelasticity with both phases characterized by incompressible neo-Hookean strain energies, and is carried out when the composite elliptic cylinder assemblage carries a confocal microgeometry. The problem for a class of compressible neo-Hookean materials is also studied. The analytical results for the stress and strain distributions are verified with finite element calculations where excellent agreement is found. We then... 

A cyclic simple shear device was modified for testing coarse-grained soils at unsaturated conditions. A combined methodology of controlling suction for the practical range of coarse-grained soil water retention curves was adopted. Water head control method was used to accurately control suction within capillary and transition zones of such soils. The axis translation technique, on the other hand, was employed as a complementary approach to reach higher suction values within residual zone. In order to evaluate the performance of the new setup, independent cyclic tests were carried out at various initial suctions including all key points and zones along the primary drying path. The analyses of... 

The present study focuses on simultaneous influence of graphene nanoplatelets (GNP) and hydroxyapatite (HAp) nanopowder on microstructural, wear, tensile and biofunctional behavior of UHMWPE based nanocomposites used in biomedical applications, with the aim to utilize GNP's mechanical strength and wear resistance, while benefitting from HAp's biocompatibility at the same time. 0.1, 0.5 and 1 wt% GNP with 10 wt% optimized concentration of HAp were added to the UHMWPE matrix through an easy two-step approach consisting of solvent mixing and ultrasonication in ethanol as a liquid media. The dried nanocomposite samples of powder were then hot pressed at an optimized temperature and pressure to... 

A new polymer gel nanocomposite is fabricated for excess water production control (water shut off) in petroleum reservoirs and its rheological behavior is evaluated in the presence of sea water and formation water at the temperature of 100 °C. It is shown that at a high salinity without using SiO2 nanoparticles, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water are 12.5 Pa and 9.8 Pa respectively. However by incorporation of SiO2 nanoparticles in the polymer gel matrix, the elastic modulus of synthesized polymer gel in the presence of sea water and formation water can be improved to 13.56 Pa and 11.57 Pa respectively, which is quite interesting...