Sharif Digital Repository

We prepared copper-carbon nanocomposite films by co-deposition of RF-Sputtering and RF-PECVD methods at room temperature. These films contain different copper concentration and different size of copper nanoparticles. The copper content of these films was obtained from Rutherford Back Scattering (RBS) analyze. We studied electrical resistivity of samples versus copper content. A metal-nonmetal transition was observed by decreasing of copper content in these films. The electrical conductivity of dielectric and metallic samples was explained by tunneling and percolation models respectively. In the percolation threshold conduction results from two mechanisms: percolation and tunneling. In the... 

One of the most conventional and energy efficient methods to improve the engineering properties of concrete is the utilization of waste materials and by-products. Among agricultural wastes, rice husk ash (RHA) has exhibited the greatest potential to enhance the characteristics of cement mixtures. However, the investigations on the properties and performance of RHA are slim compared to its potential advantages and few systematic studies can be found in the literature regarding parameters influencing the chemo-physical and microstructural characteristics of RHA along with its performance in cement mixtures. In this study, the effect of retention time of rice husk is systematically... 

Groundwater contamination is a significant problem related strongly to both the protection of the environment and the need for water. In the present study, groundwater quality was investigated in the Bojnourd watershed. The Bojnourd watershed is located in the northeast of Iran, which covers 65.5 km2 of the North Khorasan province area. There are 11 extracting wells in the region. Annual water extraction from the alluvial aquifer in the area is used for agriculture, drinking, sanitary and industrial consumptions. In this research, groundwater quantity modeling, including calibration and verification by GMS software, had been performed. In the quality modeling stage, pollution contours for... 

In this study, a dielectrophoresis field-flow fractionation device was analyzed using a numerical simulation method and the behaviors of a set of different cells were investigated. By reducing the alternating current frequency of the electrodes from the value used in the original setup configuration and increasing the number of exit channels, total discrimination in cell trajectories and subsequent separation of four cell types were achieved. Cells were differentiated based on their size and dielectric response that are represented in their real part of Clausius–Mossotti factor at different frequencies. A number of novel designs were also proposed based on the original setup configuration.... 

In this paper, the excitation of surface waves in the presence of interface charges is discussed. Interface charges affect the dispersion of surface waves, and therefore they can be used in various applications such as optical modulators, switches, sensors and filters. These waves can be superior to surface plasmon waves since they are not lossy. The lossless property is satisfied in a limited range of millimetre waves to far infrared  

Application of organic−inorganic nanocomposite membranes for water treatment is exceptionally growing owing to their tunable functionalities in addition to their enhanced permeation and antifouling propensity. In the present work, novel nanocomposite polyethersulfone (PES) membrane was synthesized using antimony-doped tin oxide (ATO) nanoparticles (NPs) via phase separation technique. It was found that the modified PES-ATO nanocomposite membranes exhibited significantly higher fouling resistance and larger permeate flux recovery ratio when tested with oil sands produced water than unmodified PES membranes. Furthermore, the PES-ATO membranes provided 40% more organic matter removal compared... 

In the present research, proton exchange membranes based on partially sulfonated poly (ether sulfone) (S-PES) with various degrees of sulfonation were synthesized. It was found that the increasing of sulfonation degree up to 40% results in the enhancement of water uptake, ion exchange capacity and proton conductivity properties of the prepared membranes to 28.1%, 1.59 meq g -1, and 0.145 S cm -1, respectively. Afterwards, nanocomposite membranes based on S-PES (at the predetermined optimum sulfonation degree) containing various loading weights of organically treated montmorillonite (OMMT) were prepared via the solution intercalation technique. X-ray diffraction patterns revealed the... 

The normal state resistivity of single phase polycrystalline Gd(Ba 2-x Pr x )Cu3O7+δ samples with 0.0 ≤ x ≤ 0.50 have been investigated. There is a distinct metal-insulator transition at xMITc = 0.2 and a superconductor-insulator transition at xSITc = 0.35 with the increase of x. The two-dimensional variable range hopping is dominant in the normal state resistivity of the samples. The localization length, hopping range, and hopping energy of carriers show that Pr doping strongly localizes the carriers in normal state, and finally causes the suppression of superconductivity. © EDP Sciences, Società Italiana di Fisica, Springer-Verlag 2003  

We have studied the electrical and magnetic properties of single phase polycrystalline Gd(Ba2-x Lax)Cu3O 7+δ and Gd(Ba2-xNdx)Cu3O 7+δ (0≤ x ≤ 0.5) samples. The samples were prepared by the standard solid-state reaction technique. The electrical measurements show the decrease of Tc and increase of ΔTc with the increase of Nd and La-doping. The magnetoresistance of samples has been studied within the thermally activated flux creep (TAFC) model. The pinning energy decreases with the increase of magnetic field and doping for both systems in a similar way. The decrease of pinning energy with applied magnetic field can be scaled with two power law relations for the magnetic field: smaller and... 

Herein, we have successfully fabricated NiVS/NiCuP nanostructures on Cu wire as a fiber electrode for high performance FSMSCs applications. The 3D NiCuP dendritic film was firstly deposited on Cu wire through the electrodeposition method, which not only act as a scaffold for deposition of the electroactive materials (NiV-LDH and NiV-S), but also served as a micro-porous current collector, supplied extra capacitances. Then, NiV-LDH nanosheets grown on 3D NiCuP film were obtained using a hydrothermal method. The sulfidation of NiV-LDH is carried out through an ion-exchange reaction of OH– with S2– to obtain NiVS, which maintains an ultrathin and porous structure, improves the electrical... 

Hematite is recognized as a promising photoanode for photoelectrochemical water oxidation to produce solar hydrogen due to its favorable properties. However, the high charge carrier recombination rate due to low electrical conductivity and sluggish oxygen reduction kinetics of pure hematite hinder its photocatalytic activity. This work proposed a new hematite-based heterostructure of Ti-Fe2O3/Fe2TiO5/FeOOH, synthesized through a hydrothermal method. The photoanode morphology was branched nanorods that expanded their surface area and improved charge transfer at the photoanode/electrolyte interface. In a novel and complement modification approach, a thin pseudobrookite interlayer was applied... 

3D hydrogel environment with both unique properties of nanofibrous structure and electrical character can provide a promising scaffold for skeletal muscle tissue engineering approaches. Herein, the poly acrylic acid (PAA)-based hydrogel was engineered to conductive one by aniline polymerization in the form of nanofibers. The poly aniline (PANi) nanofibers were made by the optimized chemical reactions between the surface carboxylate groups of based hydrogel and protonated aniline monomers. We found that the strong bonding which was created between PANi and camphor sulphonic acid (CSA) as a doping agent supporting the stable electrical property of composite hydrogel after incubation in cell... 

Adult cardiomyocytes are terminally differentiated cells that result in minimal intrinsic potential for the heart to self-regenerate. The introduction of novel approaches in cardiac tissue engineering aims to repair damages from cardiovascular diseases. Recently, conductive biomaterials such as carbon- and gold-based nanomaterials, conductive polymers, and ceramics that have outstanding electrical conductivity, acceptable mechanical properties, and promoted cell-cell signaling transduction have attracted attention for use in cardiac tissue engineering. Nevertheless, comprehensive classification of conductive biomaterials from the perspective of cardiac cell function is a subject for... 

A periodic arrangement of 1-D slits carved in a perfect electric conductor is investigated, and an equivalent model which features sinusoidal surface conductivity on its upper and lower interfaces is derived. Therefore, and in sheer contrast to all the previous attempts that were successful in mimicking only the zeroth-order diffracted waves, it is capable of emulating both specular and nonspecular diffraction orders. The accuracy of the model is verified by the full-wave simulations. The proposed model is used to study the sharp Fano-type extraordinary transmission resonances arising in the structure. The transmission spectrum near these resonances is derived in terms of Fano resonance... 

We report on the response of a monolithic high Tc transition-edge bolometer to about 3 mmWave for the first time. The detector structure consisting of 400-nm YBa2Cu3O7-x(YBCO) film on buffered yttria stabilized zirconia substrate without any coupled antenna, shows bolometric type responsivity to the 3-mmWave radiation at its transition temperature. The YBCO thin film Ce0.9La0.1O2 buffer layer are both fabricated by the metal-organic deposition method. The meander line pattern of the bolometer is designed for obtaining maximum absorption and responsivity possible when the polarized radiation of the source is aligned with the pattern. Meander lines are 50 micrometers wide and 1.5-mm long. We... 

The role of microstructure on mechanical properties of sintered ferrous materials was studied using a method based on electrical conductivity measurement. The method was accompanied by quantitative fractography to evaluate the dewaxing and sintering process in iron compacts. The effects of manufacturing parameters, such as compacting pressure in the range of 150-800 MPa, sintering temperature from 400 to 1300 °C, sintering time up to 8 h, and lubrication mode were investigated. Several mathematical models were checked to obtain the best one for prediction of electrical conductivity changes as a function of manufacturing parameters. The mechanical properties of the sintered compacts were also... 

In the present study, yttria stabilized zirconia (YSZ) reinforced Cu matrix composite specimens were produced by spark plasma sintering (SPS). For comparison, pure Cu specimen was also produced in the same conditions. The effect of particles content on microstructure, relative density, electrical conductivity, and Vickers hardness was evaluated. The pin-on-disk test was also performed to determine dry sliding wear behavior of specimens under different wear conditions. After sliding wear tests, the worn surfaces were examined by field emission scanning electron microscopy (FE-SEM). Microstructural study showed satisfactory distribution of reinforcement particles in copper matrix. The relative... 

Microfluidic systems (MFS) provide a range of advantages in biomedical applications, including improved controllability of material characteristics and lower consumption of reagents, energy, time and money. Fabrication of MFS employs various materials, such as glass, silicon, ceramics, paper, and metals such as gold, copper, aluminum, chromium and titanium. In this review, gold thin film microfluidic channels (GTFMFC) are discussed with reference to fabrication methods and their diverse use in chemical and biomedical applications. The advantages of gold thin films (GTF) include flexibility, ease of manufacture, adhesion to polymer surfaces, chemical stability, good electrical conductivity,... 

We prepared Cu nanoparticles in a-C:H thin films by co-deposition of RF-sputtering and RF-PECVD methods at room temperature. By increasing Cu content in these films a nonmetalmetal (NM) transition is observed. This transition is explainable by the power law of percolation theory. The critical metal content is obtained 56% and the critical exponent is obtained 1.6, which is larger than the exponent for 2 dimension systems and smaller than the one for 3 dimension systems. The electrical conductivity of dielectric samples was explained by tunneling. Activation tunneling energy that was obtained from temperature dependence of electrical resistivity correlates with near infrared absorption peak... 

The aim of the present study was to investigate the effect of pyrogenic nanosilica with different specific surfaces areas (200 and 380 m2/g) on mechanical properties of fiber-reinforced high-performance concrete (FRHPC) produced with two different types of fibers including steel and polypropylene fibers. Accordingly, different mechanical tests (compressive, splitting tensile and flexural strengths) as well as electrical resistivity were performed at 7, 28, and 91 curing days. In addition, the modulus of rupture and flexural toughness of FRHPC prisms were calculated based on the flexural testing results. Also, scanning electron microscopy test (SEM) was conducted to evaluate the...