Sharif Digital Repository

Distribution systems management is becoming an increasingly complicated issue due to the introduction of new technologies, new energy trading strategies, and new deregulated environment. In the new deregulated energy market and considering the incentives coming from the technical and economical fields, it is reasonable to consider Distributed Generation (DG) as a viable option to solve the lacking electric power supply problem. This paper presents a mathematical distribution system planning model considering three planning options to system expansion and to meet the load growth requirements with a reasonable price as well as the system power quality problems. DG is introduced as an... 

Distribution systems management is becoming an increasingly complicated issue due to the introduction of new technologies, new energy trading strategies and new deregulated environment. In the new deregulated energy market and considering the incentives coming from the technical and economical fields, it is reasonable to consider Distributed Generation (DG) as a viable option to solve the lacking electric power supply problem. This paper presents a mathematical distribution system planning model considering three planning options to system expansion and to meet the load growth requirements with a reasonable price as well as the system power quality problems. DG is introduced as an attractive... 

This paper presents stability analysis of a distributed generation (DG) controller [1], in an islanded mode, based on the Mapping Theorem and the Zero Exclusion Condition, and validates the results based on a laboratory scale experimental setup. The DG unit is interfaced to the host system through a voltage-sourced converter (VSC). The control strategy regulates the load voltage at the desired value in the islanded mode, despite uncertainties in the load parameters. The frequency of the island is controlled in an open loop manner by an internal oscillator. The experimental results show that the controller provides robust voltage control for a wide range of load parameters, and even maintains... 

Propagation of P-wave in an unbounded elastic polymer medium which contains a set of nested concentric spherical piezoelectric inhomogeneities is formulated. The polymer matrix is made of Epoxy and is isotropic; each phase of the inhomogeneity is made of a different piezoelectric material and is radially polarized and has spherical isotropy. Note that the individual phases are homogeneous, and all interfaces are perfectly bonded. The scattered displacement and electric potentials in the matrix are expressed in terms of spherical wave vector functions and Legendre functions, respectively. The transmitted displacement and electric potentials within each phase of the piezoelectric particle are... 

This study investigates the influence of viscous dissipation on thermal transport characteristics of the fully developed combined pressure and electroosmotically driven flow in parallel plate microchannels subject to uniform wall heat flux. Closed form expressions are obtained for the transverse distributions of electrical potential, velocity and temperature and also for Nusselt number. From the results it is realized that the Brinkman number has a significant effect on Nusselt number. Generally speaking, to increase Brinkman number is to decrease Nusselt number. Although the magnitude of Joule heating can affect Brinkman number dependency of Nusselt number, however the general trend remains... 

As the penetration of wind power in electrical power systems increases, it is required that wind turbines remain connected to the grid and actively contribute to the system stability during and after grid faults. This study proposes an efficient control strategy to improve the low-voltage ride-through (LVRT) capability in doubly fed induction generators (DFIGs). The proposed scheme consists of passive and active LVRT compensators. The passive compensator is based on a new crowbar arrangement located in series with stator windings. It considerably reduces the rotor inrush current at the instants of occurring and clearing the fault. The active LVRT compensator is realised through rotor voltage... 

This paper first discusses dynamic characteristics of wind turbines with doubly fed induction generator (DFIG). Rotor back electromotive force (EMF) voltages in DFIG reflect the effects of stator dynamics on rotor current dynamics, and have an important role on rotor inrush current during the generator voltage dip. Compensation of these voltages can improve DFIG ride-through capability and limit the rotor current transients. It is found that the electrical dynamics of the DFIG are in nonminimum phase for certain operating conditions. Also, it is shown that the dynamics of DFIG, under compensation of rotor back EMF and grid voltages, behave as a partially linearizable system containing... 

Distribution systems management is becoming an increasingly complicated issue due to the introduction of new technologies, new energy trading strategies and a new deregulated environment. In the new deregulated energy market and considering the incentives coming from the technical and economic fields, it is reasonable to consider Distributed Generation (DG) as a viable option for systems reinforcement in competition with voltage regulator devices, to solve the lacking electric power supply problem and meet the load growth requirements with a reasonable price as well as the system power quality problems. The problem of optimal placement and size is formulated in two stages; minimization of... 

The influence of structural configuration on vibration responses of smart laminated beams under random loading is studied. The effect of laminate configurations and locations of sensors/actuators in the smart system is also investigated. The layer-wise approximation for displacement and electric potential is utilized to construct the finite element model. The closed-loop control response is determined through an optimal control algorithm based on the Linear Quadratic Regulator (LQR). The correlation coefficient between the input random force and the applied actuating voltage for various configurations is also computed. It is revealed that for softer configurations, the correlation... 

A carbon paste electrode (CPE) modified with 2,2′-[1,2 butanediylbis(nitriloethylidyne)]-bis-hydroquinone (BBNBH) and TiO2 nanoparticles was used for the sensitive voltammetric determination of epinephrine (EP). The electrochemical response characteristics of the modified electrode toward EP and acetaminophen (AC) were investigated by cyclic and differential pulse voltammetry (CV and DPV). The results showed an efficient catalytic activity of the electrode for the electrooxidation of EP, which leads to a reduction in its overpotential by more than 270 mV. The effects of pH and potential sweep rate on the mechanism of the electrode process were investigated. The modified electrode exhibits an... 

This paper deals with the low voltage ride-through (LVRT) control of wind turbines with doubly fed induction generators (DFIGs) under symmetrical voltage dips. The investigation first develops a mathematical formula for the rotor current and rotor voltage when DFIG is subjected to a symmetrical voltage dip. From the analysis, the reasons of rotor inrush current and factors influencing it are inferred. Then, a control scheme enhancing the wind turbine LVRT capability is designed and simulated. The proposed control scheme consists of a nonlinear control strategy applied to the rotor-side converter and a dc-link voltage control applied to the grid-side converter. It improves the damping of DFIG... 

Electro-deposition process is one of the main steps in the LIGA procedure to fabricate microstructures. In this paper, one-dimensional modeling of Nickel electro-deposition process is implemented on Rayan and developed for simulation of time-dependence diffusion and migration of charge species with reduction reactions on the cathode surface. This model is proposed by considering governing equations on electro-kinetic phenomena consist of Nernst-Plank equation and Poisson's equation of electric potential. Transport of ions toward the cathode is considered based on the effect of convection, reaction rate, diffusion and migration. The numerical results cover two series of data consisting of... 

Aerosol measurement is used in a variety of fields such as nanotechnology, materials science, pollution monitoring, air quality measurements, combustion and engine exhaust analysis, inhalation toxicology, and medical studies. One of the most prevalent methods for aerosol measurement is to use electrical mobility. An electrical mobility spectrometer (EMS) is used to measure aerosol particles size distribution ranging from 10-1000 nanometers, under the influence of an electric field. The accuracy of this distribution is influenced by flow conditions, the geometry of the EMS, the electric field, and the number of electrode rings. In this work, a multi-channel EMS is studied using computational... 

We have developed a simulation system for nanoscale high-electron mobility transistors, in which the self-consistent solution of Poisson and Schrödinger equations is obtained with the finite element method. We solve the exact set of nonlinear differential equations to obtain electron wave function, electric potential distribution, electron density, Fermi surface energy and current density distribution in the whole body of the device. For more precision, local dependence of carrier mobility on the electric field distribution is considered. We furthermore compare the simulation to a recent experimental measurement and observe perfect agreement. We also propose a novel graded channel design,... 

Porous gelatin-chitosan microcarriers (MCs) with the size of 350 ± 50 μm were fabricated with blends of different gelatin/chitosan (G/C) weight ratio using an electrospraying technique. Response surface methodology (RSM) was used to study the quantitative influence of process parameters, including blend ratio, voltage, and syringe pump flow rate, on MCs diameter and density. In the following, MCs of the same diameter and different G/C weight ratio (1, 2, and 3) were fabricated and their porosity and biocompatibility were investigated via SEM images and MTT assay, respectively. The results showed that mesenchymal stem cells (MSCs) could attach, proliferate, and spread on fabricated porous MCs... 

This paper investigates two-dimensional, time-independent elecroosmotic pressuredriven flow generated by a direct current electric potential with asymmetrical and symmetrical zeta potential distributions along the microchannel walls. Fluid flow through the horizontal microchannel is simulated using a numerical method. Two different cases are proposed to study the effect of electric potential on the flow field. First, negative electric potential is applied on the microchannel walls. In this case, large segments with negative electric potential are initially placed on the first half of the microchannel walls with two different arrangements. Afterward, smaller segments with negative electric... 

Linear controllers have been widely used for controlling Active Power Filters (APFs). However, due to their limitations, a tradeoff between the bandwidth of the current control loop (CCL) and the voltage control loop (VCL) need to be made to remain stable in all conditions. This tradeoff leads to imperfect usage of the APF's capacity. Nonlinear controllers can eliminate such limitations and simultaneously remain stable in all conditions. In this paper, a new nonlinear controller for controlling the output current and the DC voltage (Vdc) of an APF is proposed. Feedback linearization method is applied on the CCL and the VCL is controlled via indirect method. In this method, an auxiliary... 

This paper presents a decentralized control strategy for the autonomous (islanded) operation of parallel connection of two distributed generation (DG) units. The DG units are electronically interfaced to the host grid at the same point of common coupling (PCC), where the local load is also supplied. In the grid-connected mode, the voltage-sourced converter (VSC) of each DG unit controls the exchange of real and reactive power components with the host grid, based on the conventional dq-current control strategy. In the islanded mode, one of the DG units provides voltage and frequency control for the island, and the other DG unit continues to operate with the pre-islanding dq-current control... 

Two new displacement potential functions are introduced for the general solution of a three-dimensional piezoelasticity problem for functionally graded transversely isotropic piezoelectric solids. The material properties vary continuously along the axis of symmetry of the medium. The four coupled equilibrium equations in terms of displacements and electric potential are reduced to two decoupled sixth- and second-order linear partial differential equations for the potential functions. The obtained results are verified with two limiting cases: (i) a functionally graded transversely isotropic medium, and (ii) a homogeneous transversely isotropic piezoelectric solid. The simplified relations... 

Application of fractional order PID (FOPID) controller to an automatic voltage regulator (AVR) is presented and studied in this paper. An FOPID is a PID whose derivative and integral orders are fractional numbers rather than integers. Design stage of such a controller consists of determining five parameters. This paper employs particle swarm optimization (PSO) algorithm to carry out the aforementioned design procedure. PSO is an advanced search procedure that has proved to have very high efficiency. A novel cost function is defined to facilitate the control strategy over both the time-domain and the frequency-domain specifications. Comparisons are made with a PID controller and it is shown...