Sharif Digital Repository

Detection and location of any partial discharge signal requires an accurate frequency dependent cable model to correctly simulate the P.D. signal attenuation during its propagation in the cable. This model should be capable of simulating the semiconducting layers which have significant effects on P.D. signal attenuation and its propagation velocity. There is a substantial need for improvements in the flexibility of transient cable model through direct introduction of the two semiconducting layers in the cable model. This can be employed, in the next step to develop a 3 phase cable model for ATP. This paper has derived an impedance formula for the semiconducting layers. The propagation... 

In this paper, a three-dimensional numerical model is developed to analyze the influence of the Joule heating on flow characteristics of an electroosmotic flow through square cross section micro-channels. The governing system of equations consists of three sets of equations: electric potential distribution, flow-field and energy equations. The solution procedure involves three steps. The net charge distribution on the cross section of the micro-channel is computed by solving two-dimensional Poisson-Boltzmann equation using the finite element method. Then, using the computed fluid's charge distribution, the magnitude of the resulting body force due to interaction of an external electric field... 

Reactive power compensation is known as an effective tool to overcome the violations of voltage limits in electric power systems. It is also deployed to be an efficient method to minimise transmission losses. In order to maximize the effectiveness of reactive power compensation, VAr sources of proper sizes should be placed at some network buses. In this paper, a new VAr expansion tool has been developed to improve the voltage profile and reduce MW losses in a bulk power network. Keeping the minimum expansion cost and minimum switching of capacitor banks during change of load level of the system are emphasized in the proposed method. This method is based on application of genetic algorithm in... 

In this study, a genetic algorithm optimization technique is applied, to minimize the total harmonic current distortion (THCD) in induction motors fed by high power inverters, based on an approximate model. That is, having defined a desired fundamental output voltage, optimal pulse patterns (switching angles) are determined to produce the fundamental output voltage while minimizing the THCD. The complete results for two cases of 3 and 5 switching instants in the first quarter period of PWM waveform are presented. In the sequel, considering that the torque pulsation is mainly affected by the presence of low-order harmonics, the fifth, seventh, 11th, and 13th order harmonics (in the case of 5... 

In this paper the aim is to minimize the total harmonic distortion (THD) in PWM inverters while suppressing chosen harmonics concurrently and maintaining the fundamental component of the output voltage at a required level. This is reformed as an optimization task and the optimal pulse patterns are accomplished using genetic algorithm (GA) optimization technique to minimize a predefined fitness function. The complete solutions that suppress the 5 th and 7 th harmonics and optimize the THD are given. A practical limitation on the determination of sequential switching angles has been considered as a set of constraints in derivation of the results. © 2006 IEEE  

A high speed, high resolution switched-current sample and hold (SI S/H) based on a new class AB transconductance stage is presented. Simulations performed on the SI S/H in standard 0.18um CMOS technology with 1.5v supply voltage indicate low power dissipation, high sampling speed and high SNR. © 2006 IEEE  

A numerical procedure is proposed for obtaining the static deflection, pull-in (PI) deflection and PI voltage of electrostatically excited capacitive microcantilever beams. The method is not time and memory consuming as Finite Element Analysis (FEA). Nonlinear ordinary differential equation of the static deflection of the beam is derived, w/wo considering the fringing field effects. The nondimensional parameters upon which PI voltage is dependent are then found. Thereafter, using the parameters and the numerical method, three closed form equations for pull-in voltage are developed. The results are in good agreement with others in literature. Copyright © 2006 by ASME  

In this paper, the influence of the van der Waals force on two main parameters describing an instability point of cantilever type nanomechanical switches, which are the pull-in voltage and deflection are investigated by using a distributed parameter beam model. The nonlinear differential equation of the model is transformed into the integral form by using the Green's function of the cantilever beam. The integral equation is solved analytically by assuming an appropriate shape function for the beam deflection. The detachment length and the minimum initial gap of the cantilever type switches are given, which are the basic design parameters for NEMS switches. The pull-in parameters of... 

In high frequency motor-drives such as direct torque controlled (DTC) induction motor drives, the motor harmonic loss, and electromagnetic interference are largely affected by the spectrum of the motor input voltage. Nonlinear elements in the control loop of DTC drive make harmonic analysis of the drive very complex compared to classical pulsewidth modulated controlled drives. In this paper, a probabilistic method to study the harmonic contents of voltage in DTC of induction motors is presented. The DTC voltage chain is simulated with a random process. Then, the autocorrelation function of voltage vectors is calculated and its power spectrum density is obtained. The effect of flux and torque... 

This paper presents a new compensating system, which consists of a shunt active filter and passive components for mitigating voltage and current disturbances arising from an Electric Arc Furnace (EAF). A novel control strategy is presented for the shunt active filter. An extended method based on instantaneous power theory in a rotating reference frame is developed for extraction of compensating signals. Since voltages at the Point of Common Coupling (PCC) contain low frequency interharmonics, conventional methods cannot be used for dc voltage regulation. Therefore, a new method is introduced for this purpose. The passive components limit the fast variations of load currents and mitigate... 

This paper first proposes a competitive market structure for reactive power procurement and then develops a methodology for incorporating voltage stability problems into the model. The owners of electric transactions should participate in this competitive framework and submit their own firmness bids in ($/MW) to the Independent/System/Market Operator (ISOIMO). ISO clears the market for reactive energy regarding the value of each transaction and utilization cost of reactive power on one hand, and the impact of transaction amount on the voltage security of the power system on the other hand. Here, the voltage stability margin is incorporated into the power flow equations so that the security... 

Shear horizontal surface acoustic waves (SAW) propagation in an ultra-thin functionally graded piezoelectric (FGP) layer bonded to a homogeneous substrate is analytically formulated in the mathematical framework of surface/interface elasticity theory. It is assumed that the FGP over-layer is made of a hexagonal 6-mm crystal with a single axis of rotational symmetry coinciding with the axis of polarization. The mechanical and piezoelectric properties of the layer are assumed to vary linearly with thickness. The half-space is made of a transversely isotropic material. It should be mentioned that this model is of great interest in investigating SAW devices at high frequencies. Accounting for... 

Due to deregulation and restructuring in many countries, it is expected that the amount of small-scale generations connected to the distribution networks will increase. So, it is necessary that the impact of these kinds of generators on Volt/Var control should be investigated. This paper presents a new approach to Volt/Var control in distribution systems with Distributed Generation (DG). It has been shown that DG can improve the entire performance of a network system, by means of better control and decreasing losses. In this approach, the Genetic Algorithm (GA) has been used as the optimization method, where the amount of DG and its controlling parameters, the voltage regulators situation,... 

An assessment study of two different shunt FACTS devices for compensating disturbances due to voltage variation in power systems is presented in this paper. Namely, Static Compensator (STATCOM) and Static Var Compensator (SVC) are Considered in this study. Eigen Value analysis and nonlinear time domain simulations for starting motor, motor in load varying state and short circuit on motor terminals show that STATCOM DC Voltage regulation has a better performance Compared to that of SVC. The result that will be presented in the paper will prove the superiorly of STATCOM over SVC in increasing motor speeding up and improving system voltage profile particularly at starting. © 2005 IEEE  

Under voltage load shedding is one of the most important tools to avoid voltage instability. In this paper an optimal load shedding algorithm is developed. This approach is based on the concept of the static voltage stability margin and its sensitivity value at the maximum loading point or the collapse point. The traditional load shedding objective is extended to incorporate both technical and economical effects of load shedding. The voltage stability criterion is modeled as a soft constraint into load shedding scheme. The proposed methodology is implemented over the IEEE14 bus system and solved using a mathematical (GAMS/CONOPT) and two heuristic (P.S.O & GA) methods. © 2006 IEEE  

A new family of sampled-data filters in which accuracy is a function of the ratio of the resistors is introduced. It is shown that this structure is suitable for low-voltage high-speed applications. A biquad filter with a quality factor of 10 and a clock frequency of 60MHz consuming only 2mW power is also presented  

A high-speed current-mode sample-and-hold circuit is presented. This circuit allows for high sampling speed together with high linearity and precision. The sample-and-hold circuit has been designed and simulated in standard 0.18μm CMOS technology with 1.5V supply voltage. It is capable of operation with sampling frequency of 150MHz (300MHz using double sampling technique) for 12-bit accuracy using 3.7mW power  

In this paper, a new software is introduced that is developed to give the most appropriate solution for the component selection and design of a hybrid electric bus. There are several simulation programs that can simulate behavior of a hybrid electric bus, but most of them are not able to suggest the best design and the best choice of the components. Customer requirements are dissimilar and there are several different parameters that they may need. Cost, pollution, driving cycle, battery type, DC link voltage, weight, volume, fuel consumption, and acceleration are some parameters that vary from one customer to the other. The stated software that is developed and presented by this paper will... 

Different analysis methods have been used for voltage stability assessment. In comparison with static analysis methods, little work has been done on dynamic analysis of large interconnected power systems. Voltage instability can be studied effectively with a combination of static approaches and time simulations. This paper discusses voltage stability assessment using mixed static and dynamic techniques. Using static methods, a voltage stability based ranking is carried out to specify faint buses, generators and links in power system. The system is analyzed for most severe conditions. Then, time domain simulation is performed for the conditions determined by voltage instability ranking. The... 

The efficient production of syngas from a CH4+CO2 mixture in an atmospheric pulsed glow discharge, sustained by corona pre-ionization, has been investigated. The products were mainly syngas (CO, H2) and hydrocarbons up to C4, with acetylene having the highest selectivity. The energy efficiency was within 15-40% for different experimental conditions, which demonstrates a comprehensive improvement relative to the achievements of other types of non-equilibrium plasma. These values are, however, comparable with the efficiencies obtained by gliding arc plasmas but this plasma operates at near room temperature. Furthermore, it has been shown that the energy efficiency is increased by decreasing...