Sharif Digital Repository

A carbon-paste electrode (CPE) is modified by incorporating cobalt-5-nitrosalophen (CoNSal) and tetraoctylammonium bromide (TOAB). The mechanism of electrocatalytic oxidation of dopamine (DA) and ascorbic acid (AA) at the surface of the CoNSal-modified CPE containing various percents of TOAB is thoroughly investigated by cyclic and differential pulse voltammetry. In solutions of pH 5.0, in which all studies are performed, DA exists as the positively charged species whereas AA is mainly as the neutral form. Therefore, the favorable ionic interaction (electrostatic repulsion) between the cationic form of DA and the cationic surfactant (TOA+) caused increasing the overvoltage for DA and... 

The electrochemical behavior of captopril at the surface of a carbon-paste electrode (CPE) modified with cobalt-5-nitrolsalophen (CoNSal) is described. The prepared electrode shows an excellent electrocatalytic activity toward the oxidation of captopril, which is leading to marked lowering in the anodic overpotential and considerable improvement of sensitivity (anodic current). Whereas at the surface of unmodified electrode an electrochemical activity for captopril cannot be observed, a very sharp anodic wave with an anodic peak potential about 650 mV (versus Ag/AgCl) is obtained using the prepared modified electrode. This catalytic wave is assigned to mediating of Co(III)/Co(II) redox... 

A carbon-paste electrode (CPE) chemically modified with the cobalt(II)-4-methylsalophen (CoMSal) as a Schiff base complex was used as a highly sensitive and fairly selective electrochemical sensor for simultaneous, determination of minor mounts of ascorbic acid (AA) and cysteine. This modified electrode shows very efficient electrocatalytic activity for anodic oxidation of both AA and cysteine via substantially decreasing of anodic overpotentials for both compounds. The. mechanism of electrochemical oxidation of both AA and cysteine using CoMSal-modified electrode was thoroughly investigated by cyclic voltammetry and polarization studies. Results of cyclic voltammetry (CV) and differential... 

The voltammetric behavior of thioglycolic acid (TGA) was studied at a carbon paste electrode modified with cobalt phthalocyanine (CoPc). The CoPc-modified electrode shows high electrocatalytic activity toward oxidation of TGA, lowering substantially the overpotential of anodic reaction. Results of the cyclic voltammetry show that TGA undergoes a two-step oxidation (each step with one electron) resulting the dimer of thiol. Enhancement of the rate of electron transfer results in a near-Nernstian behavior of modified electrode to the concentration of TGA and makes it as a suitable potentiometric sensor for the detection of this compound. This electrode shows a near-Nernstian response in a wide... 

In this work, we present the design and fabrication of a novel nanocomposite based on noble metal and metal oxide nanoparticles dispersed on highly porous carbon obtained via the pyrolysis of an inorganic complex and metal-organic frameworks. This nanocomposite is prepared by a two-step procedure: first, the composite support of nanoporous carbon (NPC) is obtained by the direct carbonization of the Cr-benzene dicarboxylic ligand (BDC) MOF in an Argon atmosphere at 500 °C (Cr2O3-NPC). A mixture containing Cr2O3-NPC and [PtCl(SnCl3)(SMe2)2] is then prepared, and underflow of Argon is heated to 380 °C. Finally, Pt-SnO2 nanoparticles are loaded on the Cr2O3-NPC support, and the obtained... 

Developing effective and priceless electrocatalysts is an indispensable requirement for advancing the efficiency of water splitting to get clean and sustainable fuels. Herein, we reported a feasible strategy for preparing a trimetallic (NiCoFe) superior electrocatalyst with a novel open-cage/3D frame-like structure for an oxygen evolution reaction (OER). It is prepared by consequent thermal treatments of a CoFe Prussian blue analogue frame/cage-like structure under an argon (CoFeA-TT) atmosphere and then electrochemical deposition of nickel-cobalt sulfide nanosheets as a shell layer on it. The electrochemical measurements demonstrated that the deposition of NiCo-S on CoFeA-TT... 

Nickel - copper alloy modified glassy carbon electrodes (GC/NiCu) prepared by galvanostatic deposition were used for the electrocatalytic oxidation of glucose in alkaline solutions. The electro-oxidation of glucose in a 1 M NaOH solution at different concentration of glucose was studied by the method of ac-impedance spectroscopy. The impedance behavior show different patterns, capacitive, and inductive loops and negative resistances, at different applied anodic potential. The influence of the electrode potential on the impedance pattern is studied and a quantitative explanation for the impedance behavior of glucose oxidation is put forward by a proposed mathematical model. At potentials... 

Nonprecious and effective electrocatalyst development is an essential requirement for boosting water-splitting efficiency to obtain clean and sustainable fuels for future renewable energy demands. Herein, we reported an ultrafast and feasible strategy for constructing an S-doped bimetallic iron/nickel oxy(hydroxide) (S-(Fe/Ni)OOH) as a superior electrocatalyst for oxygen evolution reaction (OER). It is prepared by consequent electroplating of nickel nanocone arrays (NiNCAs) on carbon cloth (CC) and stainless-steel mesh (SSM) and then formation of S-(Fe/Ni)OOH layers on them by ultrafast one-step oxidation solution-phase method in the solution of Fe3+ and sodium thiosulfate at room... 

Engineering earth-rich, high-efficiency, and nonprecious electrocatalysts is an essential demand for water electrolysis to obtain clean and sustainable fuels. In this research, novel hybrid electrocatalysts based on coupling a hierarchical porous NiCo-mixed metal sulfide with a nanosheet structure (denoted as NiCoS) and a novel three-dimensional (3D) mesoporous open-cage/framelike structure of CoFeS are designed for oxygen evolution reaction (OER). In this regard, the single-step synthesis of a cobalt iron Prussian blue analog (CoFe PBA) frame/cagelike structure was performed without any etching step. Following a comparative study, CoFe PBA precursors were converted and doped with S, Se, and... 

A modified carbon paste electrode was prepared by incorporating TiO2 nanoparticles with bis[bis(salicylidene-1,4-phenylenediamine)molybdenum(VI)]. A mixture of fine graphite powder with 4 wt% of TiO2 nanoparticles was applied for the preparation of the carbon paste (by dispersing in paraffin) and finally modified with a molybdenum (VI) complex. The electrocatalytic oxidation of guanine (G) was investigated on the surface of the molybdenum (VI) complex-TiO2 nanoparticle modified carbon paste electrode (MCTNMCPE) using cyclic voltammetry (CV), differential pulse voltammetry (DPV), chronoamperometry (CHA) and chronocoloumetry (CHC). Using the modified electrode, the kinetics of G... 

Electrocatalytic oxidation of penicillamine (PA) at a carbon paste electrode chemically modified with cobalt salophen as a schiff base complex (CoSal) was thoroughly investigated. The results of cyclic voltammetry (CV) and polarization studies were used for the prediction of the mechanism of electrochemical oxidation of PA mediated with CoSal at the surface of a modified electrode. The performance of the modified electrode was compared with those of electrodes modified with cobalt phthalocyanine (CoPc). In comparison, CoSal appears to be considerably more effective as a catalyst for reduction of the overpotential of the anodic oxidation of PA, resulting in a very sharp anodic CV peak at... 

The electrocatalytic oxidation of hydrazine was studied over Ni, Cu, Co and Ni-based ternary alloy on graphite electrodes in alkaline solution. The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and the catalytic activity of the modified electrodes were investigated by cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). It was found that, in the presence of hydrazine, the modified Ni-based ternary alloy electrode (G/NiCuCo) exhibited a good catalytic activity for the oxidation of hydrazine at a reduced overpotential and it has a significant high... 

Porous carbon template decorated with mixed transition metals/metal oxides with tunable architecture is becoming increasingly important and attractive as a kind of novel electrode materials. In this way, mixed-metallic metal-organic frameworks (MOFs) provide an opportunity for fabrication of homogeneous mixed metals/metal oxides distribution in the porous carbon frame without any carbon precursor additive. Also, structures, dimensions and electrochemical performance of MOFs can be readily manipulated by simply tuning the metals molar ratio. In this study, we demonstrate the design and fabrication of petal-like NiCo/NiO-CoO metal/metal oxides with a rational composition embedded in 3D... 

In the present work, N-doped hollow carbon nanospheres (N-HCNSs) is prepared by direct carbonization of polyaniline-co-polypyrrole (PACP) hollow spheres without template needing. Two different NiO nanostructures (nanosheets and nanowires) are prepared by forming a shell around the N-HCNSs via simple hydrothermal/calcination processes (NiO-NSs@N-HCNSs and NiO-NWs@N-HCNSs). The morphology and structure of the nanostructures are characterized using field emission scanning electron microscopy (FE-SEM), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The prepared nanocomposites are used as catalysts for the electrocatalytic... 

Nickel hydroxide modified nickel electrodes prepared by cycling the potential of a nickel electrode in alkaline solution exhibited electrocatalytic activity for the oxidation of methane in alkaline media. In the presence of methane the oxidation peak current of nickel hydroxide increases while that of the reverse process decreases. This is attributed to the mediation of nickel species, probably β-NiOOH phase, in the process of electrocatalysis. The mechanism of methane oxidation has also been discussed in terms of the formations of intermediates normally encountered in small organics electro-oxidation. It has also been suggested that in the further oxidation of the intermediates, ions in the... 

The present study reports a simple electrochemical approach to the fabrication of a new nanocomposite containing PtPd nanoflowers (NFs) promoted with two-dimensional (2D) nanosheets (NSs) structure cuprous oxide (Cu2O) supported on reduced graphene oxide (rGO) (PtPd-NFs/Cu2O-NSs/rGO). Scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectra, Raman spectroscopy, and energy dispersive X-ray spectroscopy are used for characterization of the PtPd-NPs/Cu2O-NPs/rGO. SEM images showed that vertical-standing arrays of Cu2O with an edge length up to 1 μm and thickness of about 20 nm are electrodeposited on the surface of rGO film. Also, PtPd needle-like NFs with visible and... 

The direct growth of self-supported metal-organic frameworks (MOFs) thin film can be considered as an effective strategy for fabrication of the advanced modified electrodes in sensors and biosensor applications. However, most of the fabricated MOFs-based sensors suffer from some drawbacks such as time consuming for synthesis of MOF and electrode making, need of a binder or an additive layer, need of expensive equipment and use of hazardous solvents. Here, a novel free-standing MOFs-based modified electrode was fabricated by the rapid direct growth of MOFs on the surface of the glassy carbon electrode (GCE). In this method, direct growth of MOFs was occurred by the formation of vertically... 

To improve the efficiency of electrochemical processes for environmental remediation, we present a new type of hybrid nanomaterials based on leaf-like copper-based quaternary transition metals and spongy monolayer graphene. To demonstrate the functionality of the hybrid electrocatalyst, fast and competent electrooxidation of water and glucose is shown. The mechanism of improved catalysis is ascribed to the synergetic catalytic effect of quaternary Cu-Ni-Fe-Co alloy with dendritic morphology along with the highly conductive and spongy structure of the graphene monolayer. It is shown that water oxidation can be performed at a low overpotential of 315 mV to reach a current denisty of 100 mA... 

Hydrogen technology through water electrolyzer systems has attracted a great attention to overcome the energy crisis. So, rationally designed non-noble metal based-electrocatalysts with high activity and durability can lead to high performance water electrolyzer systems and high purity hydrogen generation. Herein, a facile two-step method: hydrothermal and electrodeposition, respectively, are developed to decorate highly porous three-dimensional binder-free structure NiFeO/NiO nanosheets array on Ni foam (NiFeO/NiO/NF) with robust adhesion as a high-performance electrode for Hydrogen Evolution Reaction (HER). The electrodeposition process applied after the initial hydrothermal process... 

The dearth of efficient, robust, and economical electrocatalysts for water oxidation is dubiously the key obstacle for renewable energy devices, so synthesis of efficient, and cost-effective metal-based water oxidation catalysts is vital. Herein, Co3O4, Co9S8 catalysts and their heterostructure Co3O4/Co9S8 were synthesized and evaluated as water oxidation electrocatalysts. The characterization of Co3O4, Co9S8, and Co3O4/Co9S8 electrocatalysts was performed using Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction techniques. The heterostructure Co3O4/Co9S8 (1.46 V) exhibited water oxidation electrocatalysis at extremely low onset potential compared to...