Sharif Digital Repository

Network Coding (NC) is an emerging technique that helps wireless networks to have higher throughput and better energy efficiency. In this paper, a novel network coding-aware routing (S-NC) which uses NC to improve reliability and robustness in unreliable WSNs is proposed. It is based on a structure-free routing algorithm as the underlying routing engine which employs neighbor queue length to increase coding opportunity; while exploiting a spatial coding method to control the amount of redundancy. To the best of our knowledge, this is the first study on the topic of network codingaware routing in Wsns. Simulation results in Tossim demonstrate that S-NC significantly improves the performance... 

Data aggregation is an efficient method to conserve energy by reducing packet transmissions in WSNs. However, providing end-to-end data reliability is a major challenge when the network uses data aggregation. In this case, a packet loss can miss a complete subtree of values, thus greatly affecting the final results. Data transmission in multiple paths can tolerate this problem, but it may incur some computation errors for duplicate-sensitive aggregates. In this paper, we propose a Flexible Overlay Multi-path data Aggregation protocol (FOMA) which uses the available path redundancy to deliver a correct aggregate result to the sink with high reliability in an energy-efficient manner. It... 

A new strategy for enhancing the efficiency and reducing the production cost of TiO 2 solar cells by design of a new formulated TiO 2 paste with tailored crystal structure and morphology is reported. The conventional three- or four-fold layer deposition process was eliminated and replaced by a single layer deposition of TiO 2 compound. Different TiO 2 pastes with various crystal structures, morphologies and crystallite sizes were prepared by an aqueous particulate sol-gel process. Based on simultaneous differential thermal (SDT) analysis the minimum annealing temperature to obtain organic-free TiO 2 paste was determined at 400°C, being one of the lowest crystallization temperatures of TiO 2... 

The emerging multimedia applications of Wireless Sensor Network (WSNs) impose new challenges in design of algorithms and communication protocols for such networks. In the view of these challenges, error control is an important mechanism that enables us to provide robust multimedia communication and maintain Quality of Service (QoS). Despite the existence of some good research works on error control analysis in WSNs, none of them provides a thorough study of error control schemes for multimedia delivery. In this paper, a comprehensive performance evaluation of Automatic Repeat Request (ARQ), Forward Error Correction (FEC), Erasure Coding (EC), link-layer hybrid FEC/ARQ, and cross-layer hybrid... 

A massive focus has recently been made on demand response (DR) programs, aimed to the electricity price reduction, reliability improvement, and energy efficiency. Basically, DR programs are divided into twofold main categories, namely incentive-based programs and price- or time-based programs. The focus of this paper is on priced-based DR programs including consumer responses to the time differentiated pricing. Home load management (HLM) program is designed to control responsive appliances and charging/discharging cycles of plug-in hybrid electric vehicles (PHEVs) by the consumer. Uncertain parameters associated with PHEV, i.e. its departure/travelling time and energy consumption as well as... 

We propose an all-optical arbitration architecture to resolve end-point contention in the optical networks-on-chip. The proposed architecture reduces on-chip optical power and energy losses by 37% and 21%, respectively, compared to Corona's token-based control plane  

Bio-batteries are environmental friendly electricity generation devices that utilize energy from biological sources, like glucose[1] [2]. It consists of an anode with digesting enzymes and a cathode comprising oxygen-reducing enzymes. Immobilizing enzymes is a considerable issue in these kinds of devices. In this article, we propose two new methods for immobilizing and shifting particles likewise enzymes used in bio-batteries towards the anode or cathode end. Our experiments illustrate how tiny particles could be trapped in the nodes of the ultrasonic standing waves and by two methods of displacing the nodes, we can transfer the particles towards a desired location. First method is based on... 

Lifetime is the mos important concern in Wireless Sensor Networks (WSNs) due to limited battery power of sensor nodes. Moreover, a WSN should be capable of timely fulfilling its mission without losing important information in event-critical applications. In this paper, we focus on designing an energy-efficient and energy-aware real-time routing algorithm aiming to explore the long lifetime routing schemes in which delay constraint is satisfied in the presence of lossy communication links. To achieve this goal, our energy-aware forwarding protocol utilizes an optimum distance real-time routing algorithm to minimize energy consumption in unreliable WSNs. Simulation results reveal that the... 

Wireless sensor networks (WSNs) are composed of hundreds or thousands of small nodes, which work together and associate with a specific task or tasks to do. It is expected that wireless sensor networks will be used widely in many applications in the near future. One of the most important issues in WSNs is localisation. There are crucial problems over network localisation such as security attacks (internal or external), energy efficiency, and accuracy, which impact performance and energy-consuming of wireless sensor networks. The main source of these problems is network topology. A long-thin network topology (LTNT) in wireless sensor can produce errors in network localisation due to special... 

One of the most conventional and energy efficient methods to improve the engineering properties of concrete is the utilization of waste materials and by-products. Among agricultural wastes, rice husk ash (RHA) has exhibited the greatest potential to enhance the characteristics of cement mixtures. However, the investigations on the properties and performance of RHA are slim compared to its potential advantages and few systematic studies can be found in the literature regarding parameters influencing the chemo-physical and microstructural characteristics of RHA along with its performance in cement mixtures. In this study, the effect of retention time of rice husk is systematically... 

The objective of this research is geometrical optimization of half toroidal Continuously Variable Transmission (CVT) in order to achieve high power transmission efficiency. The dynamic analysis of CVT is implemented and contact between the disk and the roller is modeled viaelastohydrodynamic (EHL) lubrication principles. Computer model is created using geometrical, thermal and kinetic parameters to determine the efficiency of CVT. Results are compared by other models to confirm the model validity. Geometrical parameters are obtained by means of Particle Swarm Optimization (PSO) algorithm, while the optimization objective is to maximize the power transmission efficiency. Optimization was... 

Two important objectives in wireless sensor networks are reliability and reducing energy consumption. Hence, overcoming energy constraints and utilizing error control schemes such as Automatic Repeat Request (ARQ) and Forward Error Correction (FEC) are necessary to improve the energy efficiency and reliability. However, these two concerns are at odds, so there is a trade-off between them. Considering this point, the impact of various error control schemes on these objectives and the trade-off between them has been considered in Bluetooth networks recently. However, all these works consider ideal assumptions (e.g., perfect error detection) only. This work evaluates the energy-efficiency of... 

Lifetime is the most important concern in wireless sensor networks due to limited battery power of sensor nodes. In this paper, we focus on designing an energy-efficient and energy-aware routing algorithm, LLR, to increase the operational lifetime of multi-hop wireless sensor networks in the presence of unreliable communication links. Our proposed protocol utilizes a parameter, Broadcasting Delay, in each node associated with the hop parameters passed by a route request packet to select long lifetime paths in the network. The key point in Broadcasting Delay formulation is that it includes both node and link specific parameters. We use two different scenarios: either the link layer... 

The desire to decrease electrical loading by using energy efficient lighting has resulted in a high level of attention to replacing conventional incandescent lamps with compact fluorescent lamps (CFL). In Iran from energy management point of view, people are encouraged by ministry of power to use CFLs. Also after elimination of subsidies, the substantial increase in electric energy price resulted in a high level of penetration of CFLs in electricity grid. CFL is a nonlinear load, therefore it injects harmonic to the network. In past, due to lower application of CFL, these harmonics were ignored, however today by the widespread application of CFLs; these small sources are combined and have... 

In the present work, an unsymmetric laminated plate with surface bonded piezoelectric sensors, and actuators has been considered. Piezoelectric sensor were used to monitor the load and deformation bifurcation occurs. Monitoring the shape and load of a morphing structure is essential to ascertain that the structure is properly deployed and it is not loaded excessively, thus, preventing structural to failure. A piezoceramic actuator is used to provide activation load and to force the structure to change its stability state from one to another. A non-linear finite element model based on the layerwise displacement theory considering the electro-mechanical coupling effects of piezoelectric... 

Enzymatic decolorization of reactive blue 221 (RB221) using laccase was investigated in a dual-chamber microbial fuel cell (MFC). Suspended laccase was used in the cathode chamber in the absence of any mediators in order to decolorize RB221 and also improve oxygen reduction reaction in the cathode. Molasses was utilized as low cost and high strength energy source in the anode chamber. The capability of MFC for simultaneous molasses and dye removal was investigated. A decolorization efficiency of 87% was achieved in the cathode chamber and 84% COD removal for molasses was observed in the anode chamber. Laccase could catalyze the removal of RB221 and had positive effect on MFC performance as... 

Most of the methods developed for efficiency estimation of distillation columns were based on the empirical mass transfer and hydraulic relations correlated to laboratory data. Therefore, these methods cannot estimate efficiency of industrial columns with sufficient accuracy. In this paper, a new and applicable method was developed for calculation of efficiency (and mass and heat transfer coefficients) of distillation columns containing structured packings. This method has potential advantages; e.g., it can calculate efficiency without using any empirical mass transfer and hydraulic correlations and models, and without the need to estimate the operational and hydraulic parameters of column.... 

Wireless sensor networks include small nodes which have sensing ability; calculation and connection extend themselves everywhere soon. Such networks have source limitation on connection, calculation and energy consumption. So, since the nodes have limited energy in sensor networks, the optimized energy consumption in these networks is of more importance and has created many challenges. The previous works have shown that by organizing the network nodes in a number of clusters, the energy consumption could be reduced considerably. So the lifetime of the network would be increased. In this paper, we used the Queen-bee algorithm to create energy efficient clusters in wireless sensor networks.... 

One of the most prominent issues in fully adiabatic circuits is the breaking reversibility problem; i.e., non-adiabatic energy dissipation in the last stage adiabatic gates whose outputs are connected to external circuits. In this paper, we show that the breaking reversibility problem can result in significant energy dissipation. Subsequently, we propose an efficient technique to address the breaking reversibility problem, which is applicable to the usual fully adiabatic logic such as 2LAL, SCRL, and RERL. Detailed SPICE simulations are used to evaluate the proposed technique. The experimental results show that the proposed technique can considerably reduce (e.g., about 74% for RERL, 35% for... 

The k-nearest neighbor (k-NN) is a widely used classification technique and has significant applications in various domains. The most challenging issues in the k-nearest neighbor algorithm are high dimensional data, the reasonable accuracy of results and suitable computation time. Nowadays, using parallel processing and deploying many-core platforms like GPUs is considered as one of the popular approaches to improving these issues. In this paper, we present a novel and accurate parallel implementation of k-NN based on Mahalanobis distance metric in GPU platform. We design and implement k-NN for GPU architecture and utilize mathematic and algorithmic techniques to eliminate repetitive...