Sharif Digital Repository

Enhanced oil recovery (EOR) techniques are gaining more attention worldwide as the proved oil is declining and the oil price is hiking. Although many giant oil reservoirs around the world were already screened for EOR processes, the main challenges such as low sweep efficiency, costly techniques, possible formation damages, transportation of huge amounts of EOR agents to the fields especially for offshore cases and the lack of analyzing tools in traditional experimental works, hinder the proposed EOR process.It has been shown that recently, nanoparticles are attractive agents to enhance the oil recovery at the laboratory scale.
In this study TiO2 nanoparticles were used to improve... 

Evidently, environment contamination by water insoluble chemicals present at the industrial wastes could bring about catastrophic consequences to the biosphere. Biological based cleaning technologies are commonly considered as a practical remedy to remove these contaminations. In fact, these techniques are founded on the ability of certain microorganisms to degrade the contaminants. It is crystal clear that the availability of contaminants to the microorganisms is an essential parameter determining the final efficiency of the biodegradation process. In practice, the limited solubility of the contaminants in the aqueous phase leads to mass transfer constraints which consequently, decrease the... 

Relative permeability is an important factor that controls the two phase fluid flow in porous media. The use of carbon dioxide in enhanced oil recovery methods is common. But the question is, how does the carbon dioxide affect the relative permeability curves? In this thesis, the CO2-oil relative permeability is measured in CO2 flooding process with unsteady state method. For this purpose, the core flooding apparatus is used and the results are compared with N2-oil relative permeability in N2 flooding. The results of comparison show that oil relative permeability in CO2 flooding is higher than N2 flooding. Reduction of Interfacial tension and oil viscosity, solubility of CO2 in oil and oil... 

There are a lot of Fractured reservoirs around the world that have large portion of oil production. These reservoirs have complex structure and fractures have important role in production but the remaining oil in matrix causes that the oil recovery decreases. One of the most important factors in these reservois are wettability. Because most of the fractured reservoirs are oil wet and water injection process in these reservoirs are not effective and chemical EOR methods such as surfactant flooding method is used. Surfactant improve oil recovery by two reasons: 1- reduction of interfacial tension between oil and water . 2-Wettability alteration of matrix. The porpose of this project is... 

Today, due to limited number of light oil reservoirs, enhanced recovery from heavy oil reservoirs is taken into consideration. During the early production from heavy oil reservoirs, due to high viscosity, only a small amount (about 5%) of the oil can be produced; also after water injection operation due to unfavorable mobility ratio of water and oil, sorely more than about 10% of the original oil can be produced. On the other hand, fractured reservoirs represent about 20% of the world's oil reserves, while over 60% of the world's remaining oil reserves are in fractured reservoirs. Water flooding process leaves very high amounts of oil as remaining oil in these reservoirs too. One of the... 

There is increasing evidence that injecting modified brines has a significant impact on the amount of oil recovered, but the exact mechanism by which this occurs is an unsettled issue, and is supposed to be a cause of the complex interactions occurring between the phases insitu. In this thesis, surface chemistry of smart water has been investigated. Fluid/solid and fluid/fluid interactions for Bangestan crude oil in tfhe presence of designed solutions and a set of dilutions of Persian Gulf seawater have been studied and compared. Fluid/solid interactions were investigated through wettability studies. Impact of salinity and ionic composition on this interaction was measured through contact... 

This research was done for feasibility evaluation and understanding correct microbial enhanced oil recovery(MEOR) procedure for carbonate reservoirs. With the aim of cost reduction and possible activation of smart water mechanisms, sea water used as a base for MEOR process. Two biosurfactant producing strains were isolated from oil contaminated water and soil, and one halotolerant strain, from sea water. Optimization of biosurfactant yield was conducted and two new definitions for optimum point, by considering economical and technical facts, were proposed. Partial characterization of produced biosurfactant was carried out through FTIR and NMR analysis and the produced biosurfactant was... 

Foamy oil reservoirs and reservoirs which have water in oil emulsions have some difficulties through production with water based enhanced oil recovery techniques. Study of IFT of these oils may improve production of these reservoirs, especially for water based techniques which are most popular techniques. In this study, IFT of these oils were studied in reservoir condition. Effects of pressure, temperature and water composition were investigated. These effects were studied through Pendant drop technique and VIT apparatus  

The assessment of fluid transport in porous media is the main subject in oil reservoirs to understand the oil recovery efficiency. The efficiency of Enhanced oil recovery (EOR) processes depends on the surface properties and wetting behavior of oil reservoir rocks which are also affected by the electrokinetic behavior of solid part of the porous rock. Streaming potential measurement is one of the techniques to determine the electrokinetic properties. The streaming potential measurements using electrodes have recently been introduced in oil field applications and there are still significant uncertainties during the measurements and interpretation of streaming potential results. The Primarily... 

VAPEX is a relatively new EOR process for the recovery of heavy oil. In this process solvent is used to form a vapor chamber within a reservoir. Vapor dissolves in the oil and diluted oil drains by gravity to a horizontal production well. The essential features of this recovery mechanism have been discussed in this study. Furthermore, a semi-analytical and a simulation study of VAPEX process have been performed on a specified Iranian heavy oil reservoir (such as Kuh-e-Mond). The aim of this study is to investigate an exponential functionality (correlation) witch incorporates all physical parameters that affect the production rate of VAPEX process in dimensionless form. The adjustable... 

Asphaltenes are a polydisperse mixture of the heaviest and most polarizable fractions of the crude oil. They are defined according to their solubility properties as being soluble in aromatic solvents but insoluble in light paraffin solvents. Asphaltenes are usually responsible for many problems like wettability changes of the reservoir rock, pore clogging in the reservoir porous matrix and fouling in wellbore tubing and production surface facilities. Most of the studies in the literature, addressing the asphaltene precipitation and deposition (APD), are investigating natural depletion or gas injection process such as CO2 flooding. These studies show that asphaltene deposition and... 

Gas injection is a well-known enhanced recovery method which can improve recovery using two different displacement processes, miscible and immiscible. Typical non-hydrocarbon gases which have been utilized in these processes are carbon-dioxide and nitrogen. These gases are usually injected separately and have been rarely utilized together as a tertiary recovery process.
In this paper, we have focused on sequential carbon-dioxide and nitrogen gas injection as a novel EOR method. The periodic injections of carbon-dioxide and nitrogen have been repeated for six injection pore volumes. Sensitivity analysis of injection pressure, injection volume and injection rate have been also investigated... 

Chemical flooding such as surfactant flooding in oil reservoirs can change the wettability and interfacial tension between oil and water and so reduce the residual oil saturation in the reservoir. Some of these materials can be adsorbed a lot on the surface of carbonate rocks, so it is difficult to predict the oil recovery factor in such process. Therefore it is necessary to survey the adsorption amount of surfactants in chemical EOR injections.In this thesis, the adsorption of a nonionic surfactant on the surface of carbonate rock is experimented and the proper model is obtained. Then the surfactant is injected in a core saturated with oil to observe the efficiency of this surfactant in... 

In the recent years, there has been an increasing attention toward usage of ultrasonic for enhanced oil recovery practices. But, thorough knowledge of active mechanisms and spreading and characterization of developed fingers during this practice is not available. From the other hand, due to limited amount of light oil fields, more attentions towards recovery from heavy oils is the need of the hour. Documents show that the big issues during the enhanced oil recovery from heavy crudes are high density of reservoir oil as well as poor development of fingers during injection due to high mobility ratios. In this study, results of ultrasound effect on the heavy oil recovery and its effect on the... 

In water drive or waterflooded reservoirs, a significant amount of oil is remained in the reservoir as the residual oil. A process known as gas assisted gravity drainage, in its tertiary mode, has been applied in a number of conventional reservoirs to recover this residual oil. Gravity drainage is the main mechanism of oil recovery in the gas assisted gravity drainage enhanced oil recovery process. Previous investigations has shown that gravity force, spreading coefficient, three phase capillary pressure and reservoir wettability have significant effect on oil recovered via this process. The feasibility of using such a process in a naturally fractured reservoir is investigated in this work...