Sharif Digital Repository

Flooding algorithm is one of the most significant algorithms used in sensor networks. Although simple, this algorithm causes a large amount of energy and bandwidth to be wasted. The most important application of flooding is RREQ flooding in initial step of most routing algorithms. Although simple, this algorithm causes a large amount of energy and bandwidth to be wasted. Most previous efficient flooding algorithms use location information which is impossible for simple node in sensor network. Some others are not suitable for RREQ flooding due to eliminating redundant retransmissions. We present a modified flooding that simultaneously decreases energy consumption as well as network delay.... 

Dilute Surfactant flooding has been recognized as one of the significant processes in chemical flooding. Many oil reservoirs became appropriate candidates for surfactant/water flooding when screening criteria was developed. Injected surfactant tried to mobilize the residual oil that was trapped in interstice. The main contributing mechanism to enhance oil recovery by surfactant flooding was defined as rock wettability alteration. Wettability is one of the substantial parameters to choose the best approach for a successful surfactant flooding in which tiny change in wettability will lead to improve oil recovery fundamentally. In this experimental study the effect of different aging time and... 

The use of water-alternating-gas injection can potentially lead to improved oil recovery from the fields; simultaneous water and gas injection is a form of water-alternating-gas injection. However, there is still an incomplete understanding of these processes and the need for comparative work is inevitable. Core flood experiments and compositional simulations of water-alternating-gas and simultaneous water and gas processes are presented. Immiscible, near miscible, and miscible modes of injection are covered. Matching process is done and optimization of design parameters (injection rate, slug size, water-alternating-gas ratio, and injection gas) is performed. Experimental data demonstrate... 

The use of polymer flooding as one of enhanced oil recovery methods has recently increased. The occurrence of high shear rates in reservoir and near well bore through perforation nozzles during polymer flooding cause shear degradation of polymers and therefore polymer viscosity has decreased. Rheological behavior of polymer solution in different conditions of oil reservoir is one of the key factors to develop use of polymer solutions. A few researches are available regarding improving rheological behavior of polymeric solution. In this study, to investigate the effect of nanoparticles on rheological behavior of polymer solutions two samples were prepared: polyacrylamide solution in water and... 

Water flooding is being widely used in the petroleum industry and has been considered as a simple inexpensive secondary recovery method. But in fractured formations, existence of fracture system in reservoir rock induces an adverse effect on oil recovery by water flooding. Polymer flooding has been successfully applied as an alternative enhanced oil recovery method in fractured formations. But, the role of fracture geometrical properties on macroscopic efficiency of polymer flooding is not yet well-understood, especially in fractured five-spot systems. In this work five-spot glass micromodel, because of micro-visibility, ease of multiple experimentations and also presence of the unexplored... 

Floating urbanization could be the subject of a green flood mitigation strategy. The main part of any floating house is the buoyant part, which is made from concrete pontoons. Aggregates play the most important role in making concrete a lightweight material. Oil Palm Shell (OPS) is an agricultural waste material, which is widely available in South East Asia. This study tries to select the best cementing material from waste and produced pozzolans, to improve the specifications of green lightweight concrete with Oil Palm Shell (OPS), using decision-making methods. The decision making model was conducted by the application of a Fuzzy Preference Selection Index (PSI). Quantitative data was... 

This work concerns with experimental investigation of CO2 WAG injection to light crude oil in near miscible conditions which has been rarely attended in the available literature. Here, several core flood experiments at three constant injection rates and four WAG ratios are conducted on sandstone rocks saturated with light crude oil in presence of saline water. The results showed that higher injection rate has a better performance regarding oil recovery for smaller PVs of injected fluids, while lower injection rate showed higher ultimate recovery for a 30% increase in injected PVs. Secondary continuous gas injection showed a superior performance than all the other WAG injections in different... 

In this work effect of composition changes of injection gas, CH4 + CO2, on the performance of immiscible WAG injection in light oil, 41 oAPI, which has been rarely attended in the available literature is investigated. Presence of CO2 helps to reduce the MMP of CH4 significantly. Core flood experiments are conducted at reservoir conditions and fixed flow rate of 0.5cc/min on a sandstone sample with the brine concentration of 5000 ppm, and the influence of injection gas composition as well as WAG ratio on oil recovery is investigated. Different mole percents of methane in mixture, 0%, to 100% are examined, and the tests continued to ten alternate cycles with a slug size of 0.1 pore volumes and... 

Flood control as an important purpose of reservoir systems faces a wide range of natural, social and political challenges, mainly due to different uncertainties. Over the time, these uncertainties call for necessary changes in the original plan of the systems. Therefore, construction of new flood control systems as well as the storage reallocation and reservoir reoperation of existing ones are essential for adapting the systems to new information, conditions and policies. Furthermore, multipurpose nature of the multi-reservoir systems requires considering conflicts among various purposes. In this paper, a multiobjective optimization model is developed for analyzing such conflicts in a... 

Abstract Miscible carbon dioxide (CO2) flooding has become the most commonly and favorable approach in Enhanced Oil Recovery (EOR) because of its high oil reservoir sweep efficiency and contribution to the reduction of greenhouse gas emissions. Despite this, it can significantly favor the asphaltene deposition, which leads to the wettability reversal and formation damage. A novel experimental setup was utilized to study asphaltene deposition on the model rock at reservoir condition. The evolution of asphaltene deposition was monitored by a microscope; then analyzed by image processing software to check the amount of deposited asphaltene and its size distribution at different... 

The effect of an efficient biosurfactant produced from Pseudomonas aeroginosa MR01, a bacterial strain isolated from oil excavation areas in southern Iran, on the recovery of residual oil trapped within carbonate rocks, was investigated. In a core holder set-up, bearing a number of limestone-and dolomite-containing core samples, biosurfactant flooding resulted in oil recoveries as large as 20% to 28% Residual Oil (R.O). Biosurfactant injection in less permeable rocks in a range of 0.5 to 32 md was more successful, in terms of oil production. In the case of the least oil recovery via biosurfactant flooding, incubation of the core with a biosurfactant solution at reservoir conditions,... 

Gas flooding processes have emerged as attractive enhanced oil recovery (EOR) methods over the last few decades. Among different gas flooding processes, CO2 flooding is recognized as being most efficient for displacing oil through miscible displacement. Minimum miscibility pressure (MMP) is a crucial parameter for successfully designing CO2 flooding, which is traditionally measured through time-consuming, expensive, and cumbersome experiments. In the present study, a new reliable model based on feed-forward artificial neural networks was presented to predict both pure and impure CO2-crude oil MMP. Among various properties and parameters, reservoir temperature, reservoir oil composition, and... 

Asphaltene precipitation and deposition within the reservoir formation is one of the main concerns during enhanced oil recovery (EOR) processes especially during the gas injection. In the current study, different aspects of carbon dioxide (CO2) and nitrogen (N2) injection in the reservoir, was thoroughly examined. The feasibility of using these gases as the injection gas was explored using Bayesian network-based screening method. After recombination and preparation of the live crude oil, precipitation of asphaltene using vanishing interfacial tension (VIT) method and core flooding experimentation was examined. Besides, swelling test was utilized to investigate the effect of CO2 and N2... 

With the decline in oil discoveries over recent decades, it is believed that enhanced oil recovery (EOR) technologies will play a key role to meet energy demand in the coming years. Polymer flooding is used commonly worldwide as an EOR process. In this work, we propose the synthesis of protected polyacrylamide (PAM) nanoparticles (PPNs) with a hydrophobic polystyrene (PSt) shell by one-pot two-step inverse emulsion polymerization, in which the PSt shell was created by surface polymerization. The shell protects the active PAM chains from premature degradation caused by the harsh environment in the reservoirs, controls the release of the chains as rheological modifiers, and additionally, it... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based... 

Waterflooding has been regarded as an efficient method for pressure maintenance of oil reservoirs. x Improved techniques such as Smart Water flooding as a new EOR/IOR process has gained more momentum based on the recent research activities in this field and the reduction of oil price. Despite many efforts on achieving the governing mechanisms of Smart Water flooding in many individual fields, most of data are sparse and more possible mechanisms which explains all the interactions yet to be introduced. This experimental study used a systematic laboratory framework which is based on seawater treatments at fixed ionic strength to eliminate the ionic strength effects, NaCl considered as the... 

Although several investigations have studied the low-salinity water injection (LSWI) performance during the past decades, the effect of crude oil type on the interfacial tension (IFT) and wettability alteration is still in dark. In this regard, this study is aimed to obtain the thermodynamic energies including adhesion, cohesion and spreading coefficient during LSWI. To achieve this goal, IFT and static contact angle values of three different crude oils (i.e. light, medium and heavy) are measured as a function of sea water salinity. The obtained results revealed that the dilution of sea water can change the wettability of reservoir rock from oil wet state towards water wet state, while crude... 

The potential of crude oil swelling is dominant mechanism in the development and implementation of carbonated water (CO2 saturated water) flooding as an environmental friendly enhanced oil recovery method. In this study, the volume of crude oil drop in carbonated water (CW) was measured at temperatures of 30, 50 and 80 °C and pressures of 500, 1000, 2000 and 4000 psi to investigate the swelling behavior of crude oil during CW flooding. In addition, the variations of dynamic and equilibrium Bond number of CW/crude oil due to dissolution of CO2 in the crude oil are compared to the crude oil/water systems. It is expected that crude oil swelling decreases as temperature increases due to a... 

Utilization of nanoparticles in oil and gas industry has attracted considerable attention of engineers and researchers. In this article, the feasibility of nanoemulsion flooding is investigated as a method for Enhanced Oil Recovery (EOR) through coreflooding experiments, using a packed bed and real reservoir fluids. Nine different mixtures of the solvent, surfactant, and nanoparticles in the form of a nanoemulsion phase are generated and used to recover the oil in the context of an EOR process. Various tests are conducted to determine the properties of porous medium and fluids. To study the production performance of this EOR technique, pressure drop across the packed bed are measured, along...