Sharif Digital Repository

Polystyrene resin was functionalized by diethanolamine for the efficient removal of p-toluenesulfonic acid (p-TSA) from aqueous solution. Functionalized adsorbent (DEA-PS) was characterized by elemental analysis, Fourier transform infrared spectroscopy, point of zero charge measurement and field-emission scanning electron microscopy. According to the results, maximum removal of p-TSA was observed at the pH range of 2.5-5. The adsorption kinetics of p-TSA onto DEA-PS was represented by pseudo-first-order model and the equilibrium data followed Langmuir model well. The adsorption process was endothermic and spontaneous, along with the positive change of entropy. The regeneration of DEA-PS was... 

The Nafion ionomer affects the efficiency of the platinum (Pt) catalyst by blocking the active sites thereby restricting the gas permeability of the catalyst layer; but, there is a limitation in the quantity of Nafion ionomer that needs to be added without affecting the cell performance. Sulfonation of carbon-supported catalysts as mixed electronic and protonic conductors has been reported to be an efficient way to increase the triple-phase boundaries. In order to improve the utilization and activity of cathodic catalysts in the oxygen reduction reaction (ORR), Pt nanoparticles were loaded on a mixture of Vulcan XC-72R and MWCNTs, which were functionalized in a mixture of 96% sulfuric acid... 

In this study, the effect of surface modified nano-zirconia (nano-ZrO2) on the corrosion protection of epoxy coating on mild steel was investigated. An organosilane (trimethoxy methyl silane) was used as a surface modifier to improve the dispersability of the inorganic nanoparticles in the organic coating matrix. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to characterize the sol-gel surface modified nanoparticles. The dispersability of the modified and unmodified nano-zirconia in an epoxy coating was examined by field emission-scanning electron microscopy (FE-SEM). Electrochemical impedance spectroscopy (EIS) and salt spray were employed to... 

Compounding electron beam irradiated polytetrafluoroethylene (PTFE or Teflon) powder with silicone rubber produced silicone rubber/PTFE composites with desired physical properties. PTFE powder was exposed to electron beam irradiation at various doses and characterized by FTIR, DSC and contact angle measurements. Irradiation of PTFE with high energy electron beam induced chain scission reactions. Irradiated PTFE showed higher degree of crystallization and lower melting point with increasing absorbed dose. Number average molecular weight of irradiated PTFE was reduced significantly at higher absorbed doses. Formation of polar groups on the surface of irradiated PTFE powder was detected by FTIR... 

In the current work, synthesis of an environmental-sensitive superabsorbent hydrogel using γ-rays is described. Grafted polyacrylonitrile onto a homogeneous solution of starch and kappa-Carrageenan hybrid backbones created a smart material with reversible behavior. The reaction parameters (i.e. acrylonitrile, starch and kappa-Carrageenan concentration, as well as γ-irradiation time) affecting the. water absorbency of the. hydrogel were optimized using the. Taguchi method, in order to achieve a hydrogel with high swelling capacity. FTIR spectroscopy was used for confirming the. structure of the final product and the morphology of the synthesized hydrogel was examined by a scanning electron... 

Through a fast, simple, low cost, surfactant-free and convenient microwave-assisted route, narcis-like ZnO nanostructures (10-15 nm size) with flower diameters in the range of 1-2.5 μm were synthesized. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and room temperature photoluminescence (PL) measurements were used to characterize the produced ZnO nanostructures. The principle raw materials - ammonium hydroxide (NH4OH) and zinc acetate dihydrate [Zn(CH3COO)2·2H2O] - were both inexpensive. The method was fast, simple and surfactant-free capable of producing larger quantities of zinc oxide... 

Multi-Walled Carbon nanotube (MWCNTs) films were obtained by Thermal Chemical Vapor Deposition method and coated by palladium sputtering process. Raman spectroscopy was used to study alteration in quality of the carbon nanotubes after the sputtering process. Fourier Transform Infra Red (FTIR) spectroscopy showed that hydrogenation process can reduce the C{double bond, long}O to C-O and also produce O-H bond. Furthermore, the electrical resistance measurement for Pd/MWNTs films was performed in a chamber with 1% hydrogen gas in a constant dry air flow. Hydrogen sensing behavior of the films was investigated at 50 °C. Pd/MWCNTs films presented an irreversible gas response to hydrogen in the... 

The chemical synthesis and in vitro drug delivery response of folate-modified, polyethylene glycol-functionalized gold nanoparticles were studied. Lysine-capped gold nanoparticles were first prepared. Subsequently, the widely used anticancer agent doxorubicin (DOX) was successfully attached to the surface of folate-modified, polyethylene glycol-functionalized gold nanoparticles. Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM) were used to confirm the functionalization and conjugation steps in the chemical synthesis. The DOX-loading efficiency determined by UV-vis spectrometer was 80%. Drug release experiments displayed a controlled-release behavior... 

This work was intended to develop a new cross-linked gelatinized starch-xanthan gum hydrogel system, to characterize the properties of the new material, and to explore its potential applications in controlled drug delivery. Cross-linked starch-xanthan gum polymers were synthesized with varying levels of xanthan gum and sodium trimetaphosphate (STMP). The reaction of starch-xanthan gum polymers with STMP was examined using solid 31P NMR spectroscopy and FTIR. Morphology of the films made from the new polymers was studied by scanning electron microscopy. The swelling properties and the network parameters such as gel mesh size of the films were investigated. The permeation of solutes with... 

VO2(picolinichydrazone) complex as a catalyst was stabilized on a SBA-15 mesoporous silica as a catalytic support by using (3-chloropropyl)triethoxysilane as a connector. SBA-15 is nanoporous and has a high ratio of surface area to volume. The immobilization of a metal–Schiff base complex to the surface area of SBA-15 can improve its catalytic effects by increasing the catalytic surface area. Unlike homogeneous catalysts, heterogeneous catalysts can be recovered and reused several times without any significant loss of catalytic activity. A vanadium–Schiff base complex-functionalized SBA-15 was synthesized by covalency connected by a pre-synthesised VO2(picolinichydrazone) complex to... 

The formation of biomimetic bone-like apatite layers throughout the biopolymer-based hydrogel scaffold is an attractive approach in bone tissue engineering. Here, the starch scaffold was prepared using a combination of particulate leaching and freeze-drying techniques. The fabricated structures were then modified by citric acid to investigate the formation of bone-like apatite layer on the porous citrate-based scaffold after soaking in simulated body fluid (SBF). The Fourier Transform Infrared (FTIR) spectra and X-ray diffraction (XRD) patterns revealed that the B-type carbonated apatite has successfully deposited on the scaffold after immersing in SBF for 28 days. Indeed, high chemical... 

Magnetic polyvinyl alcohol (M-PVA) films were prepared via solution casting filled with surface modified superparamagnetic nanoparticles (M-NPs). The M-NPs were coated with citric acid during synthesis. The chemical interaction between the citric acid and M-NPs was confirmed by Fourier transform infrared spectroscopy (FTIR). The average hydrodynamic diameter of M-NPs was 19.7 nm measured by dynamic light scattering DLS and appeared almost spherical in scanning electron microscopy (SEM). The M-NPs were uniformly dispersed in polyvinyl alcohol (PVA) matrix and showed high optical transparency with good mechanical properties. M-PVA hydrogels were synthesized using gamma irradiation. The... 

A novel visible-light-driven Ag3VO4/Ag3PO4/Ag photocatalyst was successfully synthesized via an anion-exchange reaction and characterized by X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse-reflectance spectroscopy and Fourier transform infrared spectroscopy. The photocatalytic activities of prepared catalysts were evaluated by degradation of acid blue 92 (AB92) aqueous solutions under visible light irradiation. The photocatalytic results indicated that the synthesized Ag3VO4/Ag3PO4/Ag hybrid displays a significantly enhanced activity in degradation of acid blue 92 under visible light compared with pure Ag3VO4. The improved... 

TiO2, transition metal (Cr, Mn, Fe, Co, Ni, Cu, and Zn)- and aluminum-doped TiO2 nanoparticles were prepared by the sol-gel technique. The sulfated catalysts were prepared by the impregnation method with H2SO4 solution. The catalysts were characterised by X-ray diffraction (XRD), BET surface area measurement, diffuse reflectance spectroscopy (DRS), and Fourier transform infrared (FTIR) techniques. The sulfate content of the metal-incorporated samples was considerably higher than for SO4 2-/TiO2. The metal doping brought about a considerable reduction in the extent of sulfate loss from the catalyst surface due to the wide dispersion on the surface. The SO4 2-/TiO2 and SO4 2-/M/TiO2... 

The plasmonic effects of infiltrated silver (Ag) nanoparticles, with different contents, inside a nanostructured TiO2 film on the photovoltaic performance of dye-sensitized solar cells (DSSCs) are explored. The synthesized Ag nanoparticles are immobilized onto deposited TiO2 nanoparticles by a new strategy using 3-mercaptopropionic acid (MPA), a bifunctional linker molecule. Transmission electron microscope (TEM) images show that monodispersed Ag and polydispersed TiO2 nanoparticles have an average diameter of 12 ± 3 nm and 5 ± 1 nm, respectively. Moreover, Fourier transform infrared spectroscopy (FTIR) analysis reveals that Ag nanoparticles were successfully functionalized and capped with... 

The main aim of the present study was to enhance the degradation capacity of Acid Blue 92 (AB92) by visible-light-active Ag3PO4 nanocomposites based on g-C3N4 and Multiwalled Carbon Nanotubes (MWCNTs). The nanocomposites were fabricated through a tunable in situ deposition method. The properties of the resulting samples were investigated by X-ray diffraction, scanning electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The photocatalytic activity results revealed that the Ag3PO4/g-C3N4 heterojunction inorganic/organic composite exhibited an improvement in both efficiency and the rate of AB92 photodegradation in comparison with the others. The enhanced photocatalytic... 

In this study, the effect of surface modified silver nanoparticles on the corrosion protection of an epoxy coating on mild steel was studied. An organosilane (3-methoxy silyl propyl metacrylate) was used as a surface modifier to increase the dispersability of the inorganic nanoparticles in the organic epoxy coating matrix. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to characterize the surface modified nanoparticles. Differential scanning colorimetry (DSC) was employed to study the effects of modified and unmodified nano-silver on the curing heat and glass transition temperature of the epoxy coatings. Salt spray and electrochemical impedance... 

Batch culture of Azohydromonas lata was investigated for the production of intracellular poly-b-hydroxybutyrate (PHB). In order to determine the C:N value of the culture media for maximizing the microbial productivity of PHB, different concentrations of glucose and ammonium chloride were used as carbon and nitrogen sources, respectively. The optimal temperature and shaking rate was obtained at 30_C and 180 rpm, respectively. The maximum intracellular PHB concentration obtained was 5.09 g/l, which was 20% (w/w) of the cell dry weight (CDW) after 72 h. Also, the synthesis of PHB was growth associated with the C:N ratio of 153.71. The maximum calculated Yp/s was 0.212 (gr/gr) and the specific... 

In this research, Araldite 2011 has been reinforced using different weight fractions of Reduced Graphene Oxide (RGO). Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analyses were conducted and it has been shown that introduction of the RGO greatly changes the film morphology of the neat adhesive. Uni-axial tests were carried out to obtain the mechanical characteristics of the adhesive-RGO composites. It has been observed that introducing 0.5 wt% RGO enhances the ultimate tensile strength of the composites by 30%. In addition, single lap joints using neat adhesive and adhesive-RGO composites were fabricated to... 

A novel optimized chelating hydrogel was synthesized via graft copolymerization of acrylamide and 2-hydroxyethyl methacrylate (as two-dentate chelating co-monomer) onto salep (a multicomponent polysaccharide obtained from dried tubers of certain natural terrestrial orchids) using N,N′-methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Reaction parameters (N,N′-methylenebisacrylamide and ammonium persulfate amounts as well as acrylamide/2-hydroxyethyl methacrylate weight ratio) affecting the water absorption of the chelating hydrogel were optimized using a systematic method to achieve a hydrogel with high swelling capacity as possible. Heavy metal ion adsorption...