Sharif Digital Repository

The structural and dielectric properties of Gadolinium substituted U-type hexaferrites (Sr4Zn2Fe36O60) were investigated. The samples were synthesized via the Sol-gel auto combustion route. In a muffle furnace, these samples were sintered for 5 h at 1250 °C. The pellets of synthesized powder samples were characterized by XRD, PL, Dielectric, FTIR, and Raman spectroscopies. Structural elucidation of Sr4Zn2Fe36-xGdxO60 was done via XRD. The obtained XRD patterns were matched with the prior literature. The impact of Gd3+ substitutions was measured on all the lattice parameters. Lattice constants “a" and “c" were found between 5.871 and 5.900 Å and 111.76–112.23 Å, respectively. The PL spectra... 

Two-dimensional MXenes are the newly emerging family of nanomaterials with competitive performance for nano-device development. Surface functional groups and abundant binding sites make these materials ideal candidates for sensor applications. Herein, we report the successful fabrication of a MXene-based nano-bio device for capturing, sensing, and filtering the Escherichia coli (E. coli) bacteria. Mannose carbohydrate, which binds strongly to E.coli's fimH protein via glucan multivalent interactions, is used as the bio-receptor element. MXene's structure was engineered to guarantee efficient E. coli capturing without mannose detachment. Electrochemical impedance spectroscopy (EIS) and cyclic... 

In this work, for the first time, different forms of nanocomposites based on rGO and MWCNT were prepared in conjoining with the bioactive glass (BioGlass). In the carbonic layers, a highly toxic nanoparticle, CoNi2S4, was intercalated, and the role of this nanoparticle in the alkaline phosphatase activity, relative cell viability on different cell lines, and also the effect on the cell walls and cell morphologies were investigated. From another perspective, the ability of the chemotherapy drug loading to the prepared nanocomposites was investigated, and the use of leaf extracts was thought of as a green method to lower the cytotoxicity and regulate the genotoxicity of the generated... 

This work scrutinized the adulteration of pistachio butter with three potential edible oils using Fourier transform infrared spectroscopy (FT-IR) and multivariate classification methods. Each of the classes, including non-adulterated samples and adulterated samples consisting of pistachio butter mixed with various concentrations of peanut oil, corn oil and sunflower oil, were classified. For this purpose, multivariate methods, including soft independent modeling of class analogy (SIMCA) and partial least squares discriminant analysis (PLS-DA), were applied to classify the FTIR data. After evaluating the model on unknown samples, the results indicated that PLS-DA was better than the SIMCA... 

The present research comes up with a novel DNA-loaded poly-L-lysine (PLL)/hyaluronan (HA) nanocarrier (DNA-loaded PLL/HA NCs) for gene delivery applications, as a promising candidate for gene delivery into diverse cells. A straightforward approach was employed to prepare such a nanosystem through masking DNA-loaded PLL molecules by HA. Fourier-transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), field emission-scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were used to analyse the interaction of the molecules as well as the physicochemical properties of the NCs. The NCs showed a negative charge of –24 ± 3 mV, with an average size of 138 ±... 

Co2+ and Cr3+-substituted SrBaCu2-xCoxCryFe28-yO46 X-type hexaferrite with x = y = 0, 0.1 to 0.5 (step = 0.1) were prepared through auto-combustion sol–gel method and sintered at 1250 °C for 5 h which was found from thermal analysis. The thermal investigation, phase detection, spectral, magnetic, and dielectric characteristics of the prepared composition were investigated by TGA, XRD, FTIR, VSM, and dielectric measurement. XRD patterns of the entire composition confirmed the development of a single phase of X-type structure. The enhancement in the lattice parameters and cell volume was observed by varying the Co–Cr concentration, attributed to the larger ionic radii substitution. FTIRspectra... 

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of... 

Metal-organic frameworks (MOFs) biocompatible systems can host enzymes/bacteria/viruses. Herein we synthesized a series of fatty acid amide hydrolase (FAAH)-decorated UiO-66-NH2 based on Citrus tangerine leaf extract for drug delivery and biosensor applications. Five chemically manipulated FAAH-like benzamides were localized on the UiO-66-NH2 surface with physical interactions. Comprehensive cellular and molecular analyses were conducted on HEK-293, HeLa, HepG2, PC12, MCF-7, and HT-29 cell lines (cytotoxicity assessment after 24 and 48 h). MTT results proved above 95 and 50% relative cell viability in the absence and presence of the drug, respectively. A complete targeted drug-releasing... 

Incorporating titanium dioxide (TiO2) nanoparticles into the polymeric matrix offers an opportunity to obtain nanocomposites with improved functionality. In this study, the commercial TiO2 nanoparticles (TNP) were surface treated by different concentrations of aminopropyl triethoxy silane (APTS) as a coupling agent and triethylamine (Et3N) as a surface grafting catalyst by an aqueous process to prepare a nanocomposite with superior properties. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were performed to confirm the successful surface modification of TNP. The prepared modified TiO2 nanoparticles (mTNP) with different weight fractions were used as... 

Here we report on the development of a hybrid nanofibrous scaffold made from polyvinylidene fluoride (PVDF) nanofibers embedding zinc oxide nanorods (ZnOns), and poly(ε-caprolactone) (PCL) nanofibers incorporating dexamethasone (DEX)-loaded chitosan nanoparticles using dual-electrospinning method. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and tensile analysis were carried out for physiochemical characterization of the scaffolds, followed by DEX release profile. In addition, an MTT assay was conducted to assess the viability of mouse bone marrow-derived mesenchymal stem cells (mBMSCs) on the hybrid nanofibrous scaffold.... 

Background: This research follows some investigations through neural tissue engineering, including fabrication, surface treatment, and evaluation of novel self-stimuli conductive biocompatible and degradable nanocomposite scaffolds. Methods: Gelatin as a biobased material and polyvinylidene fluoride (PVDF) as a mechanical, electrical, and piezoelectric improvement agent were co-electrospun. In addition, polyaniline/graphene (PAG) nanoparticles were synthesized and added to gelatin solutions in different percentages to induce electrical conductivity. After obtaining optimum PAG percentage, cold atmospheric plasma (CAP) treatment was applied over the best samples by different plasma variable... 

PEGylated MoS2 nanoflower (MoS2-NF) and nanosheet (MoS2-NS) are synthesized through a one-pot hydrothermal method as photo absorbing agent (PAA). It is found that employing different thiol precursors result in distinct morphologies. The products are structurally, chemically, and morphologically characterized. Electron microscopy demonstrates the formation of sheet and flower morphologies of MoS2. Fourier transform infrared (FTIR) and thermal gravimetric (TGA) analysis confirm the PEGylation of MoS2 nanostructures. Raman and X-ray photoelectron spectroscopy (XPS) confirm the formation of 1T/2H structure of both samples. MoS2-NS demonstrates higher NIR absorption than MoS2-NF with a mass... 

Despite many attempts to study the interaction of fluids in low-salinity flooding, they do not examine the principles of interphasic transition phenomena. This study aims to provide a new understanding of liquid–liquid interactions during the low-salinity water interaction through a series of experiments on the oil, emulsion, and aqueous phase. Three samples of crude oils with different asphaltene concentrations and structures with known physical properties are in contact with different solutions. The brine pH, conductivity, and crude oil viscosity experiments before and after contacting the oil with brine showed that the heteroatom concentration and compaction of crude oil asphaltene... 

The dearth of efficient, robust, and economical electrocatalysts for water oxidation is dubiously the key obstacle for renewable energy devices, so synthesis of efficient, and cost-effective metal-based water oxidation catalysts is vital. Herein, Co3O4, Co9S8 catalysts and their heterostructure Co3O4/Co9S8 were synthesized and evaluated as water oxidation electrocatalysts. The characterization of Co3O4, Co9S8, and Co3O4/Co9S8 electrocatalysts was performed using Fourier transform infrared spectroscopy, scanning electron microscopy and X-ray diffraction techniques. The heterostructure Co3O4/Co9S8 (1.46 V) exhibited water oxidation electrocatalysis at extremely low onset potential compared to... 

Unique physiochemical and biological properties of nanofibers along with the choice of a wide variety of materials for both fabrication and tunable release patterns make nanofibers an ideal option for drug delivery. Loading antibacterial agents into nanofibers has attracted great deal of attention. Whilst there are several studies focusing on applying new generations of antibacterial materials, antibiotics are still the gold standard in clinical applications. Therefore, we aimed at introducing antibiotic-loaded nanofiber substrates with potential for topical skin delivery applications, reduced consumption of antibiotics and increased storage time. We applied Amoxicillin (AMX) as a model drug... 

In this contribution, the effect of physical immobilization of methylene blue (MB) into silica nanocomposites was investigated on the conversion and selectivity of the photooxygenation of anthracene and dihydroartemisinic acid (DHAA). Physically immobilized photocatalysts were synthesized through a developed Stöber method and were thoroughly characterized by UV–Vis, FTIR, XRD, XPS, SEM, TEM, HR-TEM, BET-BJH, and EDX analyses. Based on the TEM and UV–Vis results, it was determined that enhancement of the MB concentration as an organocatalyst for the Stöber reaction led to an increase in the size of the nanoparticles from 54 to 183 nm and a 21 nm blue shift in their UV–Vis spectra. Moreover,... 

Gadolinium (Gd) and cobalt (Co) substituted Sr–Ba–Cu-based Y-type hexaferrites were synthesized with the help of the sol–gel auto-combustion route. XRD (X-ray diffraction) analysis was done to ratify the phase formation of hexaferrites. The impact of Gd3+ substitutions was measured on all the lattice parameters. Lattice constants “a” and “c” were found between 5.879–5.891 Å and 43.185–43.620 Å, respectively. It was observed from the XRD analysis that with an increase in Gd–Co contents, the enhancement in the average crystallite size is noted. The thermal decomposition process was studied using TGA (thermogravimetric analysis), revealing that the precursor may give the ending product when... 

Landfill leachate is a highly contaminated liquid generated in municipal solid waste landfills. The application of sulfate radical-based advanced oxidation processes (SR-AOP) in landfill leachate treatments is emerging due to their ability to degrade both organic refractory matters and ammonia nitrogen. In this paper, application of peroxymonosulfate (PMS), activated by Fe2+ and UV was used as an economical and environmentally friendly approach for treatment of landfill leachate. Chemical oxygen demand (COD) and ammonia removals were measured as the two primary responses of landfill leachate to UV/PMS/Fe2+ treatment system. The main parameters (pH, PMS/Fe2+ mass ratio, Fe2+ dosage) affecting... 

Hyperbranched polyethyleneimine functionalized silica (PEI-SiO2) nanoparticles with considerable hydrophilicity were synthesized and incorporated into a polysulfone (PSF)/dimethylacetamide (DMA)/polyvinylpyrrolidone (PVP) membrane casting solution in five different ratios to fabricate PEI-SiO2/PSF nanocomposite membranes using nonsolvent-induced phase separation. The hydrophilic PEI-SiO2 nanoparticles were characterized by TEM, FTIR, TGA, and XPS analyses. Morphology, water contact angles, mean pore sizes, overall porosity, tensile strengths, water flux, antifouling and the dye separation performances of the PEI-SiO2/PSF membranes were also studied. The PEI-SiO2 nanoparticles were uniformly... 

We introduce highly antifouling Polymer-Nanoparticle-Nanoparticle/Polymer (PNNP) hybrid membranes as multi-functional materials for versatile purification of wastewater. Nitrogen-rich polyethylenimine (PEI)-functionalized halloysite nanotube (HNT-SiO2-PEI) nanoparticles were developed and embedded in polyvinyl chloride (PVC) membranes for protein and dye filtration. Bulk and surface characteristics of the resulting HNT-SiO2-PEI nanocomposites were determined using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Moreover, microstructure and...