Sharif Digital Repository

In this study, antibacterial activity, biocompatibility, and corrosion resistance of 316 LVM implants were improved using the development of HAp/GO/Ag nanocomposite coatings by the dip-coating method. The XRD and FTIR results confirmed the synthesis of HAp/GO/Ag nanocomposites. HAp/Ag nanoparticles (68 nm) bound to epoxy, hydroxyl, and carboxyl functional groups on GO sheets (size of GO sheets varies from 255 to 1480 nm) by electrostatic interaction. FESEM images showed that HAp/GO/Ag coatings had higher density and fewer micro-cracks than pure HAp coatings. In addition, HAp/GO/Ag coatings showed optimized nano-hardness (4.5 GPa) and elasticity modulus (123 GPa). The results of... 

In this paper, a high-performance epoxy nanocomposite with dual active/barrier protection ability based on calcium zinc phosphate (CZP) nanopigment was fabricated. Then chemistry, morphology, and anti-corrosion ability of the commercial zinc phosphate (ZP) and CZP pigments were studied. By electrochemical techniques, the inhibition potency of the CZP nanopigment was examined in a NaCl solution on mild steel (MS) substance and compared with that of ZP. Results revealed a higher corrosion inhibition degree of the CZP compared to the ZP. The growth of a protective layer on the metal coupons exposed to the CZP extract was illustrated by X-ray photoelectron spectroscopy (XPS), field emission... 

Manganese dioxide/reduced graphene oxide (MnO2/RGO) nanocomposite material was synthesized by the in-situ anodic pulse electrodeposition method to fabricate symmetric supercapacitors. The effects of the pH value of the electrodeposition bath were considered on the properties of fabricated electrodes. Three pH values of 4, 7, and 10 were evaluated, and physicochemical properties were studied using field-emission scanning and transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, nitrogen gas sorption isotherm, and thermogravimetric analysis. The electrochemical evaluation was performed by galvanostatic charge/discharge (GCD), cyclic voltammetry (CV),... 

Metal-Organic Frameworks (MOFs) are a new class of crystalline microporous solids with superior properties compared to their inorganic counterparts that offer a great variety of properties. Fe-MIL-88A is a biocompatible MOF with a flexible structure that can be synthesized in various morphologies via different chemical methods. The present study proposes two efficient methods, namely, microemulsion and surfactant-assisted solvothermal method, to prepare Fe-MIL-88A nanorods with narrow size distribution and well-defined morphology. The morphology, crystalline and chemical structure of the prepared samples were studied using FESEM images, XRD patterns and FTIR spectra, respectively, and their... 

This study aimed to evaluate the properties of nanocomposite hydrogel (NCH) based on poly (vinyl pyrrolidone) (PVP), poly (ethylene glycol) (PEG), and Barium titanate (BTNPs). Gamma radiation at various doses (25 kGy, 35 kGy) was employed to prepare cross-linked hydrogel. The effect of PVP concentration, PVP/PEG ratio, and BTNPs content, and irradiation dosage on gel content and swelling ratio of synthesized hydrogels were determined. The Flory-Rehner equation was employed to calculate the network parameters. The FTIR results indicate that the chemical structure was deformed through crosslinking PVP macromolecule radicals. The XRD spectra indicated the cubic phase of BTNPs particles and the... 

A short lifespan and increased consumption patterns make e-waste the world's fastest-growing waste stream. Computers are one of the most significant parts of e-waste. Recycling of e-waste has been introduced as the main solution to deal with environmental problems and to save natural mines. This research aims to investigate the bioleaching of Cu, Ni, and Al from computer printed circuit boards (CPCBs) using Penicillium simplicissimum. The adaptation phase began at 1 g/l CPCBs powder with 107 spores and final pulp density was reached at 30 g/l. The most effective parameters including pulp density, initial pH, and the sucrose concentration were optimized to achieve maximum simultaneous... 

The principal intention of this work is to fabricate and characterize the polyamide/chitosan nanocomposite by a novel single solvent method through the electrospinning procedure. The thermal properties and morphology of prepared nanocomposite are studied by thermogravimetric analysis (TGA) and field-emission scanning electron microscopy (FE-SEM). TGA exposed that the primary decomposition temperature is reduced with rising of chitosan content in the nanocomposites and origin disintegration temperature for polyamide/chitosan nanocomposites is perceived to be in the range from 300 to 500 °C. Also, FE-SEM images demonstrated that the nanofibers of chitosan have good adhesion on the matrix and... 

In this study, spinel CuCo2O4 (CCO) with a hierarchical hollow sphere morphology was encapsulated in V2O5-decorated ultra-wrinkled graphitic carbon-nitride (VO-UCN) for the first time via a facile glycerol-assisted solvothermal method in the interest of developing a novel high-efficiency double Z-type nano-photocatalyst (denoted as VO-UCN@CCO). The remarkable physicochemical features of the as-prepared nano-photocatalysts were verified using diverse characterization techniques including TGA, XRD, FT-IR, FE-SEM, TEM, BET, UV–vis DRS, PL, EIS, and transient photocurrent techniques. Herein, VO-UCN@CCO nanocomposite was employed for the photodisintegration of levofloxacin (LVOF) antibiotic under... 

Green biomaterials play a crucial role in the diagnosis and treatment of diseases as well as health-related problem-solving. Typically, biocompatibility, biodegradability, and mechanical strength are requirements centered on biomaterial engineering. However, in-hospital therapeutics require an elaborated synthesis of hybrid and complex nanomaterials capable of mimicking cellular behavior. Accumulation of hazardous cations like K+ in the inner and middle ear may permanently damage the ear system. We synthesized nanoplatforms based on Allium noeanum to take the first steps in developing biological porous nanomembranes for hazardous cation detection in biological media. The...