Sharif Digital Repository

Well deliverability is an important issue in forecasting the performance of many gas condensate reservoirs. Condensate accumulations near the wellbore may cause a significant reduction in the well productivity, even in the case of very lean fluids. Generally, the well deliverability is affected by two pressure-drop sources due to depletion and condensate buildup. Recently rapid spreadsheet tools have been developed to evaluate the well performance using material balance equation for depletion and two-phase pseudo pressure integral for well inflow performance. Most of them account for the effects of negative inertia and positive coupling in the calculation of gas relative permeabilities. This... 

The production of high-purity aluminum nanoparticles (Al-NPs) is challenging due to the highly reactive nature of Al metals. Electromagnetic levitation gas condensation (ELGC) is a promising method to produce high-purity metallic particles as it avoids the interaction between molten metal and refractory-lined, which guarantees the removal of impurities such as oxygen (O). In this research, high-purity Al-NPs were successfully fabricated via ELGC process and fully characterized. The effects of power input and gas flow rate on particle size and distribution were analyzed using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), and dynamic light... 

The effect of condensate blockage on the pressure drop near the well bore has been studied. Two types of single well simulations have been conducted and pressure drop due to condensate blockage has been quantified based on variation of gas relative permeabilities in near well bore area. The relationship of condensate banking pressure drop, gas rate and reservoir quality has been presented. It is shown that for a poor reservoir quality, condensate blockage can increase the pressure drop up to 200% of the pressure drop in the tubing  

Production from gas condensate reservoirs requires precise determination of reservoir fluid properties along with their positive impact on real reservoir performance evaluation and fluid in place volume calculation. This fact is particularly important because liquid drop out phenomena occurs as a result of pressure drop due to fluid production and condensate remains in reservoir [Mohebzadeh, 2005. In this study the challenges and problems of fluid phase behavior simulation in southern Iranian retrograde gas condensate reservoirs is discussed. Most of the problems and challenges are inaccuracy of equation of states near the critical point, special conditions and produced fluid flow... 

Electromagnetic levitation gas condensation (ELGC) method was used to synthesize silver nanoparticles (NPs). Silver droplets were melted and levitated stably at about 1130°C with appropriate flat coils in a 10mm OD silica tube. High purity argon, nitrogen and helium were employed as carrier gases and cooling media. Morphology and particle size of the products were investigated by scanning and transmission electron microscopy (SEM and TEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDAX) and dynamic light scattering (DLS). The DLS, SEM and TEM studies demonstrated narrow size distribution of spherical shape silver NPs with mean particle size of about 60, 50 and 30nm... 

Over the years, accurate prediction of dew-point pressure of gas condensate has been a vital importance in reservoir evaluation. Although various scientists and researchers have proposed correlations for this purpose since 1942, but most of these models fail to provide the desired accuracy in prediction of dew-point pressure. Therefore, further improvement is still needed. The objective of this study is to present an improved artificial neural network (ANN) method to predict dew-point pressures in gas condensate reservoirs. The model was developed and tested using a total set of 562 experimental data point from different gas condensate fluids covering a wide range of variables. After a... 

In the last years, an appreciable effort has been directed toward developing empirical models to link the relative permeability of gas condensate reservoirs to the interfacial tension and velocity as well as saturation. However, these models suffer from non-universality and uncertainties in setting the tuning parameters. In order to alleviate the aforesaid infirmities in this study, comprehensive modeling was carried out by employing numerous smart computer-aided algorithms including Support Vector Regression (SVR), Least Square Support Vector Machine (LSSVM), Extreme Learning Machine (ELM), Multilayer Perceptron (MLP), Group Method of Data Handling (GMDH), and Gene Expression Programming... 

A depleted naturally fractured gas condensate reservoir with extremely tight matrix permeability in the center of Iran is used for gas storage. Due to the tightness of the matrix, simulation of this process may present a unique challenge in terms of the importance of diffusion process in flow behavior of the injected gas in matrix blocks. This article presents a multimechanistic (Darcian-type flow and Fickian-type flow) mathematical model to investigate the importance of diffusion process as a function of important rock and fluid parameters. The authors' approach consists of the following steps: (a) development of a 1-D governing equations for a single matrix block consists of a gas... 

Most condensate gas reservoirs discovered in Iran are rich in intermediate components. The phase diagram of these fluids is essential for reservoir management. The available commercial reservoir fluid simulators are not able to find the critical point of some of these condensate gas reservoirs to obtain the phase diagram quality lines. The quality lines of these reservoir's samples can be obtained experimentally using the constant mass expansion test data. The authors present experimental development of gas condensate phase diagram along with retrograde condensation and revaporization characterization during the reservoir depletion process of one Iranian condensate gas reservoir  

Producing from gas condensate reservoirs under dew-point pressure and at constant temperature shows a complex behavior because of existing liquid condensate around the well. Zones with different mobilities generate three zones as a zone away from the well containing only gas, a zone having liquid around the well and finally a zone containing movable oil and gas. Existence of condensate around wellbore reduces gas relative permeability and as a result productivity index of the well will decrease. In fact, this condensate acts like an additional skin and investigating of this behavior can be difficult because of the complex fluid flow processes. Well test analysis in naturally fractured... 

The positive coupling effect decreases the condensate saturation as a result of very high flow rates in vicinity of the wellbore. The current work challenges the notion that the positive rate effect does not lead in falling trend of condensate saturation around the wellbore in the case of rich gas composition. According to the results obtained from this parameter case study, four distinct trends would appear in the condensate saturation profile of both lean and rich gas compositions. These quadruplet trends are consistent and their occurrence is mainly related to the considered base capillary number (Ncb) which is likely dependent to the composition of the fluid  

In this article, a genetic algorithm is used to optimize the separator pressures in a multistage crude oil and multistage gas condensate production unit with four and three separators respectively. This leads to the generation of more accurate results for the quality and quantity of oil remaining in the stock tank for both crude oil and gas condensate production units. Genetic-based optimized pressures for crude oil separators resulted in 1.8% and 2% enhancement in oil remaining in the stock tank for summer and winter respectively. API gravity of the stock tank oil was improved 2.4% in summer and 2.2% in winter. For the gas condensate production unit, optimized pressures can enhance by 8.6%... 

Well deliverability is an important issue in forecasting the performance of many gas condensate reservoirs. Condensate accumulation near the wellbore can cause a significant reduction in productivity, even in reservoirs where the fluid is very lean. Generally, the well deliverability is affected by two pressure-drop sources due to depletion and condensate buildup. Recently Rapid spreadsheet tools have developed to evaluate the well performance using material balance equation for depletion and two-phase pseudo pressure integral for well inflow performance. Most of them account for the effects of negative inertia and positive coupling in the calculation of gas relative permeability. This paper... 

Well deliverability is an important issue in forecasting the performance of many gas condensate reservoirs. Condensate accumulation near the wellbore can cause a significant reduction in productivity, even in reservoirs where the fluid is very lean. Generally, the well deliverability is affected by two pressure-drop sources due to depletion and condensate buildup. Recently Rapid spreadsheet tools have developed to evaluate the well performance using material balance equation for depletion and two-phase pseudo pressure integral for well inflow performance. Most of them account for the effects of negative inertia and positive coupling in the calculation of gas relative permeability. This paper... 

Reservoir fluid modelling is one of the most important steps in reservoir simulation and modelling of flow lines as well as surface facilities. One of the most uncertain parameters of the reservoir fluids is the plus fraction. An accurate and consistent splitting scheme can reduce this uncertainty and as a result, enhance the modelling of reservoir fluids. The existing schemes for splitting plus fractions are all based on assuming a specific mole fraction-molecular weight distribution with predefined constant values that may yield inaccurate and inconsistent results. In this study, an optimization-based algorithm was developed to determine the aforementioned controlling parameters of the... 

Recently, wettability alteration has been much attended by researchers for studying well productivity improvement in gas condensate reservoirs. Previous studies in this area only utilized water/alcohol based chemicals for this purpose. While, hydrocarbon nature of the blocked condensate in retrograde gas reservoirs, may motivate application of hydrocarbon based chemical agents. In this study, a new hydrocarbon based wettability modifier is introduced to alter wettability of carbonate and sandstone rocks to preferentially gas wetting condition. Static and dynamic contact angle measurements, spontaneous imbibition and core flooding tests were conducted to investigate the effect of proposed... 

Condensate and water banking around gas condensate wells result in vital well deliverability issues. Wettability alteration of near wellbore region to gas wetting condition is known to be the most novel and the only permanent method, to improve condensate well productivity. In this work, a water based nanofluid is used to change the wettability of sandstone reservoir rocks from strongly liquid wetting to intermediate gas wetting condition. Static contact angle measurements demonstrated significant increase of liquid phase contact angle as a result of chemical treatment with SurfaPore M nanofluid. The characteristics of SurfaPore M adsorption on sandstone rock are quantified through kinetic... 

Productivity of gas condensate reservoirs reduces significantly due to the near wellbore condensate/water blockage phenomenon. A novel, permanent solution to alleviate this problem is near wellbore wettability alteration of reservoir rocks to preferentially gas wetting conditions; industrial chemical materials are good candidates for this purpose, because of their eco-friendly characteristics, economical price, and mass production. In this paper, a comparative study is conducted on two industrial fluorinated chemicals, MariSeal 800 and SurfaPore M. Static and dynamic contact angle measurements, spontaneous imbibition, and core flooding tests were conducted to investigate the effect of... 

Gas condensate production using technology of multi-stage hydraulically fracturing in shale gas condensate reservoirs' horizontal wells is a new topic of unconventional resources studies. Thus, shale gas condensate as a new source of energy can be considered as an important issue for development and further studies. In this work, a semi-analytical solution of gas and oil two-phase flow is presented for pressure transient analysis (PTA) and rate transient analysis (RTA) of a shale gas condensate reservoir's production data. Fluid flow assumption here is flow in a pseudo triple-porosity porous media, which are matrix, natural fractures and adsorbed gas. Adsorbed gas is a form of gas in porous... 

Techniques of production data analysis for single-phase oil and gas reservoirs have advanced significantly over the past few years. These techniques range from traditional (i.e., Arps, 1945; Fetkovich, 1980) to modern methods that account for the variation of operating conditions at the wellbore. However, the application of these later methods to gas condensate reservoirs is a challenge. The authors aimed to extend the applicability of modern production data analysis (single-phase flow) to analyze the production data of a gas condensate reservoir (two-phase flow). A single-phase production model consists of (a) a material balance equation, (b) the solution of diffusivity equation for gas...