Sharif Digital Repository

PbS on Pb thin film (Pb/PbS) was deposited on conductive glass (CG) substrate (CG/Pb/PbS) using electrochemical techniques to investigate the Schottky junction in solution. The CG/Pb/PbS electrode was investigated by different techniques based on thermionic emission theory. Electrochemical cell consisted of the CG/Pb/PbS as a working electrode in an alkaline solution showed character of the Schottky junction. Reduction and oxidation of H2O on the CG/Pb/PbS electrode were enhanced under illumination. Water photo splitting is the main process. Study of linear sweep voltammetry at around open circuit potential (OCP) allowed proposing a model based on the Schottky junction which is charged at... 

Poly(lactic acid) (PLA)/poly(vinyl acetate-. co-vinyl alcohol) [P(VAc-. co-VA)] blends as new transparent film packaging materials were prepared at various blend compositions and different vinyl alcohol contents. The blends and pure PLA were irradiated by gamma rays to investigate the extent of changes in the packaging material during gamma ray sterilization process. The miscibility of the blends was dependent on the blend composition and vinyl alcohol content; gamma irradiation had little effect on the extent of miscibility. The glass transition temperature of pure PLA and PLA/P(VAc-. co-VA) miscible blends reduced after irradiation. On the other hand in PLA/P(VAc-. co-VA) immiscible... 

A novel ultrasensitive modified electrode was fabricated with a graphene nanosheets and carbon nanospheres (GNS-CNS)-based nanocomposite film as a powerful platform. Pt nanoparticles (PtNPs) were simply electrodeposited onto the GNS-CNS-coated glassy carbon electrode creating a PtNPs/GNS-CNS hybrid nanocomposite modified electrode. Scanning electron microscopy, energy dispersive X-ray spectroscopy and linear sweep voltammetry (LSV) techniques were used for the characterization of the prepared modified electrode. The results of investigation of electrochemical response characteristics of cefepime (CP) revealed a considerable improvement in the oxidation peak current of CP on PtNPs/GNS-CNS/GCE... 

To investigate the factors influencing the luminescent properties of polymetallic cycloplatinated complexes a detailed study of the photophysical and structural properties of the heteronuclear complexes [Pt2Me 2(bhq)2(μ-dppy)2Ag2(μ-acetone) ](BF4)2, 2, [PtMe(bhq)(dppy)Tl]PF6, 3, and [Pt2Me2(bhq)2(dppy)2Tl]PF 6, 4, [bhq = benzo[h]quinoline, dppy = 2-(diphenylphosphino)pyridine] was conducted. Complexes 3 and 4 synthesized by the reaction of [PtMe(bhq)(dppy)], 1, with TlPF6 (1 or 1/2 equiv.) and stabilized by unsupported Pt-Tl bonds as revealed by multinuclear NMR spectroscopy and confirmed by X-ray crystallography for 3. DFT calculations for the previously reported butterfly Pt2Ag2 cluster 2... 

Despite brilliant properties of glass ionomer cement (GIC), its weak mechanical property poses an obstacle for its use in medical applications. The present research aims to formulate hydroxyapatite/yttria-stabilized zirconia (HA/YSZ) in the composition of GIC to enhance mechanical properties and to improve fluoride release of GIC. HA/YSZ was synthesized via a sol-gel method and characterized by applying X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photo-emission spectroscopy (XPS) and simultaneous thermal analysis (STA) along with transmission electron microscopy (TEM) methods. The synthesized nanocomposite was mixed with GIC at a fixed composition of 5.... 

The present paper demonstrates the capability of narrow graphene nanoribbons (GNRs) in constructing new sensing platforms. Graphene nanoribbons have been synthesized via a simple solvothermal route through unzipping of carbon nanotubes, which was confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman spectroscopy analysis. These narrow carbon sheets were used to form a composite film by in-situ electro-polymerization with aniline. The produced graphene nanoribbon/polyaniline (GNR/PANI) composite film showed impressive performance in electrochemical determination of dobutamine (DBT). Under optimal conditions, in comparison to... 

In this research, an attempt was made to improve TiO2 photo-catalyst properties, thus pure, N-Ce co-doped TiO2 thin films were prepared on glass-ceramic substrate using a sol-gel dip-coating technique. The samples were calcinated in air at 475 °C, 550°C, and 650°C for 2 h. The result of simultaneous thermal analysis (STA) and X-ray diffraction (XRD) showed that the presence of Ce in TiO2 could inhibit the phase transformation from anatase to rutile and enhance the thermal stability, and anatase was the dominant phase in N-Ce co-doped TiO2 samples. Also based on the results, the doping results in decreasing the size of TiO 2 crystallite. The results of ultra violet-visible light diffuse... 

In this study, the effect of carboxyl-terminated butadiene-acrylonitrile liquid rubber on fracture toughness of glass-reinforced epoxy composites has been investigated. Fracture toughness tests were conducted in modes I, II and different mixed mode ratios. The data obtained from these tests have been analyzed by using different methods. Results indicated that interlaminar fracture toughness of composite specimens improved considerably through addition of carboxyl-terminated butadiene-acrylonitrile in modes I, II and mixed mode. Interlaminar fracture surfaces of the specimens were also characterized by field emission scanning electron microscope  

Electrical behavior of hybrid conductive composites made of phenolic resin, graphite woven, glass woven and graphite nano powder has been studied for the first time in the present research to apply as collecting plates in electro static precipitators. To this purpose, two types of four-layer composites smeared with phenolic resin by different amounts of graphite nano powder then produced at 120°C and 200 bars with proper curing cycle. Finally, electrical resistivity of all the plates undergoing impact loading after different rapping cycles was measured by means of a repetitive rapping tester system particularly manufactured for this task. This study performs changes in mechanical behavior of... 

Microbial Enhanced Oil Recovery (MEOR) as a tertiary process employs microorganisms and their metabolites to reduce the residual oil saturation of the reservoir mainly through interfacial tension (IFT) reduction and wettability alteration. In spite of its great potential and the mentioned advantages, application of MEOR has been limited because of the lack of practical convincing experimental results. In this study, the effects of MEOR process on wettability changes and the reduction of residual oil saturation have been examined by providing microscopic visualization of two phase flow in transparent glass micromodels. Biosurfactant producing bacterial strain (Enterobacter cloacae) was... 

A simple electrodeposition method is employed to construct a thin film modifier of palladium-gold nanoparticles (Pd-AuNPs) decorated multi-walled carbon nanotube (MWCNT) on the surface of glassy carbon electrode (GCE). Morphology and property of Pd-AuNPs-MWCNT have been examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Electrochemical performance of Pd-AuNPs-MWCNT/GCE for detection of ceftazidime (CFZ) has been investigated by cyclic voltammetry (CV). This nanostructured film modified electrode effectively exhibited enhanced properties for detection of ceftazidime (CFZ). The effects of various experimental variables such as, the amount of casted MWCNT,... 

Electrochemical deposition, as a well-controlled synthesis procedure, has been used for subsequently layer-by-layer preparation of nickel hydroxide nanoparticle-reduced graphene oxide nanosheets (Ni(OH)2-RGO) on a graphene oxide (GO) film pre-cast on a glassy carbon electrode surface. The surface morphology and nature of the nano-hybrid film (Ni(OH)2-RGO) was thoroughly characterized by scanning electron and atomic force microscopy, spectroscopy and electrochemical techniques. The modified electrode appeared as an effective electro-catalytic model for analysis of rifampicin (RIF) by using linear sweep voltammetry (LSV). The prepared modified electrode exhibited a distinctly higher activity... 

A novel electrochemical sensor for clonazepam (CLNP) was fabricated based on immobilizing cellulose nanofibers/carbon nanoparticles (CNFs/CNPs) nanocomposite on glassy carbon electrode (CNFs/CNPs/GCE). The combination of CNFs and CNPs produced a novel kind of structurally uniform and electro-analytically active nanocomposite. The surface morphology of CNFs/CNPs layer deposited onto glassy carbon electrode was characterized by scanning electron microscopy. The results of the voltammetric investigations showed a considerable enhancement in the cathodic peak current of CLNP (up to 60 times) on the surface of CNFs/CNPs/GCE relative to the bare GCE. Under the optimal conditions, the modified... 

A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01-10.00 μM with a detection limit of... 

Graphene oxide nanoplatelets (GONPs) with extremely sharp edges (lateral dimensions ∼20-200 nm and thicknesses <2 nm) were applied in extraction of the overexpressed guanine synthesized in the cytoplasm of leukemia cells. The blood serums containing the extracted guanine were used in differential pulse voltammetry (DPV) with reduced graphene oxide nanowall (rGONW) electrodes to develop fast and ultra-sensitive electrochemical detection of leukemia cells at leukemia fractions (LFs) of ∼10-11 (as the lower detection limit). The stability of the DPV signals obtained by oxidation of the extracted guanine on the rGONWs was studied after 20 cycles. Without the guanine extraction, the DPV peaks... 

Both natural montmorilonite (CN) and organically modified montmorilonite (CB) improved significantly the mechanical performance of novolac phenolic resin (PF)/woven glass-fiber (GF) composites due to their nanodispersion and good interfacial interaction with the matrix. It was revealed that the incorporation of 2.5 wt% of the clays enhances the elastic modulus up to 38% for CN and 43% for CB. Aging of PF/GF composites at various aqueous solutions, i.e. water, brine and acidic environments, increased stiffness of the composite (∼100-250% increase in elastic modulus) due to possible secondary crosslinking caused by water molecules and hydroxyl groups of PF resin. However, aging led to the... 

Recently, nanodiamonds have attracted interest in biomedical applications such as drug delivery, targeted cancer therapies, fabrication of tissue scaffolds, and biosensors. We incorporated diamond nanoparticles in alginate-bioactive glass films by electrophoretic process to prepare functional coatings for biomedical implants. Turbidity examination by time-resolved laser transmittance measurement revealed that a stable multi-component aqueous suspension of alginate, bioactive glass and diamond particles could be obtained at concentrations of 0.6, 1.3, and 0.65 g/l, respectively. Uniform films with ~ 5 μm thickness were deposited on 316 stainless steel foils by employing constant field... 

Controlling topographic features at all length scales is of great importance for the interaction of cells with tissue regenerative materials. We utilized an indirect three-dimensional printing method to fabricate polymeric scaffolds with pre-defined and controlled external and internal architecture that had an interconnected structure with macro- (400-500 μm) and micro- (∼25 μm) porosity. Polycaprolactone (PCL) was used as model system to study the kinetics of tissue growth within porous scaffolds. The surface of the scaffolds was decorated with TiO2 and bioactive glass (BG) nanoparticles to the better match to nanoarchitecture of extracellular matrix (ECM). Micrometric BG particles were... 

We show that, in a nonlinear centrally coupled circular array of evanescently coupled fibers, the coupling dynamics of a weak signal beam can be efficiently influenced by a high-power control beam that induces nonlinear defects. When the intense control beam is launched into the central core and one core in the periphery, then localized solitons are formed and cause the fibers with induced defects (defected fibers) to decouple from the other array elements. In the presence of a high-intensity control beam, the propagation of weak signal is restricted to the defected optical fibers. The weak signal periodically couples between the induced defects. This oscillatory behavior depends on the sign... 

Different concentrations of CaF2 were incorporated in mica glass-ceramics to evaluate their effects on the crystallization and microstructure. The kinetics of phase transformations, and the microstructures of the final crystalline phase were found to be dependent on the concentration of nucleation agents. The results showed that CaF2 in high concentration had a synergistic effect and enhanced the formation of interlocked mica crystals. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses were changed in the range of 235-405 kJ/mol, while the crystallization activation energies of samples with addition of CaF2 were changed in the range of 419-747...