Sharif Digital Repository

In the present study, a bioactive silicate-phosphate glass-ceramic scaffold was fabricated via the polymer-derived ceramics (PDC) method. K2HPO4 phosphate salt was used as the P2O5 precursor in this method. The effect of K2HPO4 wt% and heat treatment temperatures (900–1100 °C) was evaluated. It was observed that although increasing the wt% of K2HPO4 led to the formation of scaffolds with higher densities and strengths, it could also increase the formation of the calcium phase, which could result in improper release behavior of scaffolds. On the other hand, higher heat treatment temperatures enhanced the strength of the scaffolds but eliminated the bioactive octacalcium phosphate (OCP) phase.... 

In the present study, a bioactive silicate-phosphate glass-ceramic scaffold was fabricated via the polymer-derived ceramics (PDC) method. K2HPO4 phosphate salt was used as the P2O5 precursor in this method. The effect of K2HPO4 wt% and heat treatment temperatures (900–1100 °C) was evaluated. It was observed that although increasing the wt% of K2HPO4 led to the formation of scaffolds with higher densities and strengths, it could also increase the formation of the calcium phase, which could result in improper release behavior of scaffolds. On the other hand, higher heat treatment temperatures enhanced the strength of the scaffolds but eliminated the bioactive octacalcium phosphate (OCP) phase.... 

The overall behavior of rammed earth (RE) as a low embodied energy construction method can be enhanced by using stabilizers. Several studies have been performed on cement and lime stabilized RE. However, studies on other additives, especially the sustainable ones, are limited. In this research, the effect of stabilizers including cement, pozzolan, microsilica, fiberglass, guar gum and phase change material (PCM) was evaluated on the performance of RE mixtures. The mixtures were assessed by considering the durability, shrinkage, thermal conductivity, mechanical properties and their sensitivity to the humidity. Then, the correlations were determined between the mechanical properties and the... 

The effects of SiO 2 and K 2O were investigated on the glass forming ability (GFA) and structural characteristics of CaOTiO 2P 2O 5 system. Differential thermal analyzer (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR and 31P magic angle spinning NMR methods were applied for characterizations of the system. Unwanted crystallization in the initial three components base glass composition was observed by adding SiO 2 and crystalline phases such as TiP 2O 7, rutile (TiO 2) and cristobalite (SiO 2) were formed in it. The results showed that K 2O prevents crystallization of glasses and promotes the formation of glass. FT-IR and X-ray diffraction showed that the addition... 

Usage of concrete-filled pultruded glass fiber-reinforced polymer (GFRP) tubes (CFPGT) as columns can increase the service life of structures. However, marine structures such as oil platforms are always prone to fire because of the low resistance to the elevated temperatures. The purpose of this investigation is to evaluate the effects of concrete core strength (30 and 60 MPa), and exposure temperature (25, 100, 200, 300, and 400 °C) and time (60 and 120 min) on the compressive and bond behavior of CFPGTs. The properties of unexposed and exposed concrete core, pultruded GFRP hollow tubes, and CFPGTs were determined via compressive and disk-split tests. Also, the push-out test was used to... 

Different concentrations of CaF2 were incorporated in mica glass-ceramics to evaluate their effects on the crystallization and microstructure. The kinetics of phase transformations, and the microstructures of the final crystalline phase were found to be dependent on the concentration of nucleation agents. The results showed that CaF2 in high concentration had a synergistic effect and enhanced the formation of interlocked mica crystals. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses were changed in the range of 235-405 kJ/mol, while the crystallization activation energies of samples with addition of CaF2 were changed in the range of 419-747... 

In this study, the effect of surface modified silver nanoparticles on the corrosion protection of an epoxy coating on mild steel was studied. An organosilane (3-methoxy silyl propyl metacrylate) was used as a surface modifier to increase the dispersability of the inorganic nanoparticles in the organic epoxy coating matrix. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to characterize the surface modified nanoparticles. Differential scanning colorimetry (DSC) was employed to study the effects of modified and unmodified nano-silver on the curing heat and glass transition temperature of the epoxy coatings. Salt spray and electrochemical impedance... 

In this work, the magnetic and transport properties of micro and nanometer-sized samples of La0.9Ba0.1MnO3 manganite have been studied. The temperature variation of ac susceptibility of the nanometer-sized sample shows one transition at high temperature (265 K). On the contrary, the ac susceptibility of the micrometer-sized sample shows two transitions with a high-temperature transition occurring at 240 K and low-temperature transition around 100 K. The high-temperature transition corresponds to the paramagnetic-ferromagnetic (PM–FM) transition (Tc) and is independent of frequency, while the low-temperature transition is frequency-dependent and shifts toward high temperatures by increasing... 

WO3-SiO2 compound thin films were deposited on glass substrates using the sol-gel method, and then all the samples were dried at 100 °C and annealed at 400 °C in air. The effect of WO3 concentration on the hydrophilicity of WO3-SiO2 compound films was studied for the first time and it was shown that the films containing 85 mol% of the concentration possessed a superhydrophilic surface without UV or visible irradiation. Optical properties of the films such as transmittance, reflectance and bandgap energy were investigated using a UV-visible spectrophotometer. According to atomic force microscopy, the surface ratio was maximized in 85 mol% concentration of WO3 similar to hydrophilicity.... 

Thin films of (WO3)1-x-(Fe2O 3)x composition were deposited by thermal evaporation on glass substrates and then all samples were annealed at 200-500 °C in air. Optical properties such as transmittance, reflectance, optical bangap energy, and the optical constants of the "as deposited" and the annealed films were studied using ultraviolet-visible spectrophotometry. It was shown that the annealing process changes the film optical properties which were related to Fe2O3 concentration. Moreover, using X-ray photoelectron spectroscopy, we have indicated that WO3 is stoichiometric, while iron oxide was in both FeO and Fe2O3 compositions so that the FeO composition converted to Fe2O3 after the... 

The immiscible process appears to be one of the first feasible methods for the extraction of oil reserves. However, there is a lack of fundamental understanding of how fracture geometrical characteristics control the efficiency of oil recovery in this type of enhanced oil recovery technique. In this article, a series of experiments were conducted whereby the distilled water displaced n-decane in strongly oil wet glass micro-models having different fracture geometries. Breakthrough time, as a function of injected pore volume of distilled water, was measured using image analysis of the provided pictures. It has been observed that when the fractures' length is increased, the breakthrough time... 

In this study, the effects of fiber type (i.e., carbon and glass fibers) and intumescent paint on the tensile performance of fiber reinforced polymer (FRP) sheets at elevated temperatures are investigated. For this purpose, a series of tensile tests were conducted on the glass and carbon fiber reinforced polymer (GFRP and CFRP) sheets, with and without intumescent fire retardant paint, at different elevated temperatures. The studied temperatures ranged from 25 °C to 600 °C. Scanning electron microscopy was also used to examine the effects of elevated temperatures on FRP sheets and the fire protecting mechanism of the intumescent paint. Based on the test results, the tensile strength of the... 

The compressive performance of glass fiber reinforced polymer (GFRP) profiles subjected to elevated temperature was investigated through a large number of (3 0 0) tests. The effects of profile cross-sectional area, slenderness, and temperature on the behavior of the GFRP profiles at temperatures ranging from 25 to 400 °C were determined. It was observed that the compressive strength of the GFRP profiles has been decreased by half as the temperature exceeded 90 °C, i.e., close to the glass transition temperature of the matrix. The temperature and ratio of cross-sectional area to external perimeter were determined as two major parameters affecting section capacity. © 2020 Elsevier Ltd  

We have studied the effect of negative chemical pressure in the RuGd 1.5(Ce 0.5-xPr x)Sr 2Cu 2O 10-δ with Pr content of 0.0 ≤ x ≤ 0.2. This is also investigated using the bond length results obtained from the Rietveld refinement analysis. The c parameter and cell volume increase with x for 0.0 ≤ x ≤ 0.15. The width of the resistivity transition also increases with Pr concentration, indicating higher inhomogeneity and oxygen deficiency. The difference in the ionic valences of Pr 3+,4+ and Ce 4+ causing different hole doping, the difference in the ionic radii, and oxygen stoichiometry affect the superconducting transition. The magnetoresistance shows a cusp around 135 K which lies between the... 

In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy... 

In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy... 

The purpose of this investigation is to investigate the axial and lateral behavior of low strength concrete confined by glass fiber reinforced polymer (GFRP) wraps. A total of 48 cylindrical samples having 150 mm diameter and 300 mm height were strengthened and examined. The mix designs were provided with four different target strength (5, 10, 15, and 20 MPa). The axial and lateral strain were studied to evaluate the axial strain relation and the lateral strain for axial compression. The results of this investigation present a comparison between the nine models previously reported for normal strength concrete and the lesser-known context of low strength concrete confined by fiber reinforced... 

In this study, the influence of temperature on serrated flow behavior, strain rate sensitivity (SRS) and effective activation volume in a Ti-based bulk metallic glass (BMG) bent at different strain rates has been investigated. Results reveal that the fundamental origin of shear deformation is related to the time-dependent structural relaxations, which occur during deformation at special temperatures and strain rates. Furthermore, the localized structural relaxation processes at intermediate temperatures cause an inelastic shuffling within cages and mitigate the activation of STZs. The main reason of negative SRS at intermediate temperatures is due to the insufficient time for structural... 

In this study, the influence of temperature on serrated flow behavior, strain rate sensitivity (SRS) and effective activation volume in a Ti-based bulk metallic glass (BMG) bent at different strain rates has been investigated. Results reveal that the fundamental origin of shear deformation is related to the time-dependent structural relaxations, which occur during deformation at special temperatures and strain rates. Furthermore, the localized structural relaxation processes at intermediate temperatures cause an inelastic shuffling within cages and mitigate the activation of STZs. The main reason of negative SRS at intermediate temperatures is due to the insufficient time for structural... 

Various compositions of maleated ethylene-propylene-rubber (EPR-g-MA) toughened polyamide 6 without and with short glass fiber, i.e. 5-20 wt.% rubber and 5-20 wt.% fiber, are prepared using an industrial twin-screw extruder at different levels of feed rate (100-250 kg/h), screw speed (200-450 rpm) and barrel temperature (230-260 °C). Trial runs designed based on the Taguchi's orthogonal arrays are subjected to tensile, impact, scanning electron microscopy (SEM) and optical microscopy tests; and the results are used to perform the analysis of variance (ANOVA). It is shown that the rubber particle size decreases significantly by increasing the rubber content for the unreinforced blend. The...