Sharif Digital Repository

The Taguchi method, a robust experimental design, was used for the optimization of the synthesis of a novel biopolymer-based superabsorbent hydrogel, carrageenan-graft-poly(sodium acrylate). The Taguchi method was applied for the experiment and standard 16 orthogonal arrays with five factors and four levels for each factor were used. In the synthesis of the superabsorbent hydrogel, N,N′-methylene bisacrylamide (MBA) was used as crosslinker, ammonium persulfate as initiator, and acrylic acid as monomer. Neutralization percent and reaction temperature were used as important factors. The analysis of variance results showed that the most important factor in this synthesis was MBA concentration.... 

A novel superabsorbent hydrogel composite based on kappa-carrageenan (κC) was prepared by graft copolymerisation of acrylic acid (AA) in the presence of kaolin using methylenebisacrylamide (MBA) as a crosslinking agent and ammonium persulfate (APS) as an initiator. The synthetic variables (i.e. AA, MBA and APS concentration, and the amount of kaolin) affecting the water absorbency of the resulting superabsorbent composite were studied. Evidence of grafting and kaolin interaction was obtained by comparing the FTIR spectra of the initial substrates and of the superabsorbent composite. A new absorption band at 1722 cm-1 in the composite spectrum confirmed the kaolin-organic polymer linkage.... 

In this article, we synthesize a novel gelatin-based superabsorbent hydrogel via graft copolymerization of mixtures of acrylic acid (AA) and acrylamide (AAm) onto gelatin backbones. The polymerization reaction was carried out in an aqueous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N-methylene bisacrylamide (MBA) as a crosslinker. The hydrogel structures were confirmed by FTIR spectroscopy. The effect of grafting variables, i.e. concentration of MBA and APS, AA/AAm weight ratio, and reaction time and temperature, was systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling behavior of these absorbent polymers... 

Nanofiber membranes were fabricated by electrospinning poly(vinylidene fluoride). The electrospun nanofiber membranes were further modified by grafting of acrylic acid (AA) and methacrylic acid (MAA) over the surfaces of the membranes. Plasma AA graft was attempted only, and the results indicated the partial membrane pore filling with grafted AA. For MAA grafting, chemically induced polymerization using benzoyl peroxide and hydrogen peroxide was attempted. The combination of plasma and chemically induced MAA graft polymerization was also attempted. The membranes were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and static contact angle (SCA)... 

A new cationic flocculant was synthesized by graft copolymerization of acrylamide (AM) and 3-(methacryloylamino)propyl]trimethylammonium chloride (MAPTAC) onto salep using free radical polymerization initiated by ammonium persulfate (APS) to produce cationic salep [S-g-P(AM-co-MAPTAC)]. Reaction parameters (monomers/salep ratio, concentration of reactants, MAPTAC/AM ratio, and APS) were optimized using a full factorial experimental design to obtain the highest settling rate for cement suspensions. The best performing product was characterized by gel permeation chromatography (GPC), FTIR, 1H NMR spectroscopy, and thermogravimetric analysis (TGA). The resulted cationic flocculant may be... 

Hydrogels of poly(acrylic acid) grafted onto salep with excellent water absorption and water retention abilities under neutral conditions were successfully synthesized for the first time and employed for different applications. The effect of reaction variables to achieve maximum swelling capacity was investigated. In our procedure, ammonium persulfate (APS) as a water-soluble initiator and methylenebisacrylamide (MBA) as a suitable crosslinking agent were used and the best synthesis conditions described. The structure of the final product was confirmed by Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy SEM and TGA analysis and a mechanism for superabsorbent... 

In the present study, we attempt to synthesize and characterize novel CMC-g-poly (acrylic acid-co-2-acrylamido-2-methylpropanesulfonic acid)/silica gel composite. Infrared spectroscopy and TGA thermal analysis were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy. The effect of reaction variables affecting on water absorbency of the composite and swelling behavior in various solvents, salt, and pH solutions was investigated. Maximum water absorbency of the optimized final product was found to be 4000 g/g in distilled water. The absorbency under load (AUL) of the hydrogel was also determined by... 

A novel kappa-carrageenan (κC)-based superabsorbing hydrogel was synthesized through graft copolymerization of acrylamide (AAm) onto a κC substrate in the presence of a crosslinking agent. The crosslinked κC-poly(AAm) polymer graft was partially hydrolyzed in alkaline medium to yield a superabsorbent resin, H-carragPAM. The resin structure was confirmed using FTIR spectroscopy. The variables of graft copolymerization (monomer, initiator, polysaccharide and crosslinker concentration, reaction temperature and time as well as stirrer speed) that affected on the ultimate water-swelling capacity were optimized. The time-temperature variation of the copolymerization was investigated in terms of... 

Polycaprolactone-polylactide block copolymers (PCL-block-PLA) were grafted onto filled multi-wall carbon nanotubes (MWCNT) successfully. In this synthesis, MWCNTs were opened and functionalized, and then they were filled by silver nanoparticles. The filled MWCNT were used as macroinitiator for ring opening polymerization of ε-caprolactone and L-lactide. Then the end hydroxyl functional groups of MWCNT-graft-PCL or MWCNT-graft-PLA were used as initiator for ring opening polymerization of lactide and ε-caprolactone and MWCNT-graft-PCL-block-PLA or MWCNT-graft-PLA-block-PCL were obtained, respectively. Length of grafted copolymer chains onto the MWCNT was controlled using CNT/monomer ratio.... 

Synthesis and swelling behavior of a new superabsorbent hydrogel based on natural salep grafted with Polyacrylamide is described. The new superabsorbent hydrogel biopolymer was synthesized via radical crosslink-ing and graft copolymerization of acrylamide monomer onto salep backbones. Regarding to the water absorption of hydrogel, the best synthesis condition is reported. FTIR spectroscopy and thermogravimetric analysis were used to confirm the structure of the final product and a mechanism for superabsorbent hydrogel formation was also suggested. After preparing the desired hydrogels based on optimum condition, several factors affecting the swelling behavior of hydrogel including pH of... 

The chemical, thermal, and mechanical degradation of polymer chains under high salinity, temperature, and shear rates in oil reservoirs are the current challenges of the polymer flooding process. To answer such a complex requirement, recently, acrylamide (AM)-based thermoassociating graft copolymers (TAP) were synthesized that presented excellent performance as a viscosity enhancer, especially under high temperature and salinity conditions. The purpose of this study was to further investigate the effect of salinity, shear rate, mechanical strength, and adsorption of these TAPs on viscosity-enhancing performance at different temperatures. Finally, the performance of the TAPs was studied in... 

Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using eerie ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA  

Synthesis of novel natural-based superabsorbents with improved properties is of prime importance in many applications. In this article we report an efficient synthesis of new polysaccharide-based superabsorbent hybrid composing carrageenan, acrylic acid, sodium acrylate, and 2-hydroxyethyl acrylate through homogenous solution polymerization process. Infrared spectroscopy and thermogravimetric analysis (TGA) were carried out to confirm the chemical structure of the hydrogel. Moreover, morphology of the samples was examined by scanning electron microscopy (SEM). To deeper studies on the structure-property relation in SAP hydrogels, three hydrogels with different acrylic acid/2-hydroxyethyl... 

A series of superabsorbent composites were synthesized through graft copolymerization of acrylic acid (AA) onto carboxymethyl cellulose (CMC) in the presence of celite powder using N,N'-methylenebisacrylamide (MBA) as a cross-linking agent and ammonium persulphate (APS) as an initiator. The chemical structure and thermal properties of the composite hydrogels were characterized by FTIR spectroscopy and TGA methods, respectively. Morphology of the samples was examined by scanning electron microscopy (SEM). In free-state, the swelling conditions and hence the related data are not real, because in all their applications the swelling particles of superabsorbent must absorb aqueous solutions while... 

A thermosensitive copolymer was synthesized by graft copolymerization of poly(lactide-co-glycolide) (PLGA) copolymers onto the surface of chitosan membranes. Acryloyl chloride was used as a coupling reagent for the covalent attachment of PLGA to the chitosan membranes. FTIR spectroscopy and DSC analysis were used to characterize the resulting graft copolymer. Thermosensitive swelling behaviors of the copolymer were investigated as well. The membranes exhibited reversible swelling-shrinking behavior; higher swelling ratios were obtained observed at higher temperatures. Drug permeation studies were carried out using vancomycin hydrochloride and betamethasone sodium phosphate as the model... 

The magnetic composite hydrogel was fabricated by the graft copolymerization of itaconic acid (IA) onto starch and Alginic acid in the presence graphene sheets (Gr) and Fe3O4 nanoparticles (Fe3O4@Gr-IA/St-Alg) for Guaifenesin (GFN) delivery and wound healing. The Fe3O4@Gr-IA/St-Alg biomaterial is a hydrogel network endowed the material with magnetic property. In addition, GFN not only achieved effectively bound to the magnetic hydrogel, but also released in a controlled manner. The using external magnetic field has significantly positive influence on the drug release rate. To close, these hydrogel drug carriers offer a favorable platform for magnetically targeted drug delivery as well as a...