Sharif Digital Repository

The goal of this study is to investigate the effects of tendon and cannulated drill bit diameter on the strength of the bone and site hold tendon inside (BASHTI) fixation technique for an anterior cruciate ligament (ACL) reconstruction. Bovine digital tendons and Sawbones blocks were used to mimic the ACL reconstruction. Mechanical strength of the specimens was measured using a cyclic loading continued by a single cycle pullout load until failure to simulate the real postsurgical loading conditions. Finally, failure modes of specimens and ultimate failure load were recorded. The maximum possible tendon surface strain (i.e., tendon compression [TC]) for tendon diameters of 6, 7, 8, and 9 mm... 

In this article, we synthesize a novel gelatin-based superabsorbent hydrogel via graft copolymerization of mixtures of acrylic acid (AA) and acrylamide (AAm) onto gelatin backbones. The polymerization reaction was carried out in an aqueous medium and in the presence of ammonium persulfate (APS) as an initiator and N,N-methylene bisacrylamide (MBA) as a crosslinker. The hydrogel structures were confirmed by FTIR spectroscopy. The effect of grafting variables, i.e. concentration of MBA and APS, AA/AAm weight ratio, and reaction time and temperature, was systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling behavior of these absorbent polymers... 

A switchable dual light- and temperature-responsive drug carrier using gold nanoparticles (Au NPs)-grafted poly(dimethylacrylamide-co-acrylamide)/poly acrylic acid [P(DMA-co-AAm)/PAAc] hydrogel was prepared by free radical polymerization procedure using N,N-methylenebisacrylamide as cross-linker and ammonium persulfate as initiator. Initial P(DMA-co-AAm) hydrogel and uniformly-distributed stable Au NPs, prepared by reduction of hydrogen tetrachloroaureate (III) hydrate in the presence of trisodium citrate, were synthesized separately. Then, the prepared P(DMA-co-AAm) and Au NPs were added to an acrylic acid solution along with the cross-linker and initiator to prepare PAAc hydrogel within... 

Laser assisted drug release from a synthesized plain polymer composed of poly (butyl methacrylate-co-acrylamide-co-methacrylic acid) [P(BMA-co-AAm-co-MAA)] and a metallo-polymer composed of silver nanoparticles (Ag NPs) grafted plain polymer (the nanocomposite) were studied to investigate their capability to serve as drug carriers. Positive temperature dependent swelling changes were observed for both carriers and their thermal sensitivity and thermal and optical switching properties were investigated in two buffered solutions. An acidic solution with pH = 1.2 to simulate stomach body condition and a neutral solution with pH = 7.4 to simulate intestine condition. Reversible phase transition... 

Small diameter vascular grafts (<6 mm) are highly demanded for patients suffering from severe occluded arteries to be used as a bypass or substituted conduit. Fabricating a graft with appropriate structural, mechanical and cell growth properties which has simultaneously anti-thrombogenic trait is a challenge nowadays. Here, we proposed a bilayer heparinized vascular graft that can mimic the structural and mechanical characteristics close to those of the native coronary artery by combining electrospinning and freeze drying methods. In this study, the inner layer was made by co-electrospinning of synthetic polymer, poly-caprolactone (PCL) and the natural polymer, gelatin (Gel). Also, heparin... 

Small diameter vascular grafts (<6 mm) are highly demanded for patients suffering from severe occluded arteries to be used as a bypass or substituted conduit. Fabricating a graft with appropriate structural, mechanical and cell growth properties which has simultaneously anti-thrombogenic trait is a challenge nowadays. Here, we proposed a bilayer heparinized vascular graft that can mimic the structural and mechanical characteristics close to those of the native coronary artery by combining electrospinning and freeze drying methods. In this study, the inner layer was made by co-electrospinning of synthetic polymer, poly-caprolactone (PCL) and the natural polymer, gelatin (Gel). Also, heparin... 

The magnetic composite hydrogel was fabricated by the graft copolymerization of itaconic acid (IA) onto starch and Alginic acid in the presence graphene sheets (Gr) and Fe3O4 nanoparticles (Fe3O4@Gr-IA/St-Alg) for Guaifenesin (GFN) delivery and wound healing. The Fe3O4@Gr-IA/St-Alg biomaterial is a hydrogel network endowed the material with magnetic property. In addition, GFN not only achieved effectively bound to the magnetic hydrogel, but also released in a controlled manner. The using external magnetic field has significantly positive influence on the drug release rate. To close, these hydrogel drug carriers offer a favorable platform for magnetically targeted drug delivery as well as a... 

The in vitro endothelial response of human umbilical vein endothelial cells was investigated on a poly (caprolactone)-based polyurethane surface vs an in situ TiO2-polyurethane nanocomposite surface, which has been produced as scaffolds for artificial vascular graft. The in situ synthesis of TiO2 nanoparticles in polyurethane provided surface properties that facilitated cellular adhesion, cell sensing, cell probing and especially cell migration. Cells on the nanocomposite surface have elongated morphology and were able to produce more extracellular matrix. All of these advantages led to an increase in the rate of endothelialization of the nanocomposite scaffold surface vs pure polyurethane.... 

The treatment of water contaminated by bacteria is becoming a necessity. The nanomaterials possessing both intrinsic antibacterial properties and photocatalytic activity are excellent candidates for water disinfection. The powdered form of nanomaterials can be aggregated while embedding the nanomaterials into the NFs can overcome the limitation and enhance the photocatalytic activity and transition from UV-light to visiblelight. Here, graphene oxide (GO) was synthesized, grafted to chitosan, and decorated with silver nanoparticles (Ag NPs) to produce Ag-decorated reduced GO-graft-Chitosan (AGC) NPs. The blends of polyacrylonitrile (PAN) and AGC NPs were prepared in various concentrations of... 

A flexible, porous and biocompatible titanium dioxide nanotubes (TNT) - polyurethane (PU) film has been produced as a new scaffold for artificial vascular grafts. Synergistic improvements in the properties of vertical TNT and PU was reached, including enhancements in their biocompatibility, mechanical strength, flexibility and porosity. Open-ended (OE) TNT-PU and close-ended (CE) TNT-PU films were synthesized and their mechanical and biological properties were compared with their pure PU counterparts. TNT were attached to PU with a new strategy. The resulting flexible structure was hydrophilic and super hydrophilic in OE-TNT-PU and CE-TNT-PU scaffolds, respectively. The gas leakage during... 

Although the anterior cruciate ligament (ACL) reconstruction using interference screw is a well-accepted surgical procedure, patients still suffer graft failure in the initial rehabilitation phase. Graft fixation stability of a newly designed anatomical hybrid thread tapered interference screw (AHTTIS) was compared with a conventional standard one (CSIS) by conducting in-vitro mechanical tests. According to the CSIS manufacturer's instruction, eight tapered bone tunnels, matching AHTTIS geometry, and eight straight cylindrical tunnels were drilled in artificial bone blocks. Bovine tendon grafts were fixed using AHTTIS and CSIS in their corresponding bone tunnels. Each graft was subjected to... 

In this research, a series of numerical simulations were conducted utilizing computational fluid dynamics (CFD) software in order to predict the heat transfer performance of queues nanofluids containing clove-treated graphene nanoplatelets (CGNPs) flowing in a horizontal stainless steel heated pipe. The GNPs were covalently functionalized with clove buds using free radical grafting reaction using an eco-friendly process. The advantage of this synthesis method was that it did not use hazardous acids, which are typically used in traditional treatment methods of carbon nanostructures. The thermo-physical properties of the aqueous nanofluids obtained experimentally were used as inputs for the... 

In this study, a new facile and cost effective method is used to modify polysulfone membrane surface in order to improve the hydrophilicity, antifouling, and blood compatibility. This modification was performed by adding two functional monomers on the dialysis membrane. Polysulfone (PSF) membranes containing polyvinylpyrrolidone were prepared via phase inversion technique. In the next step, free radical polymerization combined with surface polymerization was used to introduce acrylic acid (AA) and 2-hydroxyethyl methacrylate (HEMA) onto the polysulfone membrane surface via circulation of initiator and monomer solutions across the membrane surface, respectively. Various monomer concentrations... 

We study the hydrodynamic dispersion (HD) by electroosmotic flow in soft microchannels. Considering a fully developed flow in a slit microchannel of low surface potential and adopting the Taylor dispersion theory, we derive analytical solutions for the solute concentration field and the effective dispersion coefficient. We also conduct numerical analyses to broaden the paper's scope to high surface potentials and to specify a criterion for the validity of the Debye-Hückel linearization in soft microconduits as well as to investigate the broadening of an analyte band from the time of injection. It is demonstrated that the effective dispersion coefficient of a neutral solute band is generally... 

The chemical, thermal, and mechanical degradation of polymer chains under high salinity, temperature, and shear rates in oil reservoirs are the current challenges of the polymer flooding process. To answer such a complex requirement, recently, acrylamide (AM)-based thermoassociating graft copolymers (TAP) were synthesized that presented excellent performance as a viscosity enhancer, especially under high temperature and salinity conditions. The purpose of this study was to further investigate the effect of salinity, shear rate, mechanical strength, and adsorption of these TAPs on viscosity-enhancing performance at different temperatures. Finally, the performance of the TAPs was studied in... 

In this work, the addition of a novel polyaniline (PANI)/silica (SiO2) nanostructure (PSn) in chitosan/polyvinyl alcohol nanofibers (CP) was evaluated to enhance the dye removal capacity of CP. Fourier transform infrared spectroscopy (FTIR), field-emission scanning electron microscopy (FE-SEM), and energy-dispersive X-ray spectroscopy (EDS) results confirmed the chemical grafting of SiO2 on PANI nanoparticles. Brunauer-Emmett-Teller (BET) results showed a specific surface area of 61 m2 g−1 for the PSn filled CP nanofiber (CP-PSn). FE-SEM and EDS-elemental mapping results showed the uniform dispersibility of PSn in CP nanofibers. After the addition of PSn into CP, the adsorption capacity of... 

Water can be pumped in nanochannels by limiting it between the surfaces with different hydrophobicities and exerting a spinning electric field. The asymmetrical hydrophobicity combined with the spinning electric field and the fact that the water molecules have a dipole moment create a situation in which the angular momentum of water molecules is transformed into a linear momentum and the water is pumped into the nanochannel. The hydrophobicity of the surfaces can be manipulated by using nanostructures to reduce friction. In this study, two types of nanostructures have been used which are hierarchical nanostructures and polymer nanostructures made of Poly(N-isopropylacrylamide). The walls of... 

Zeolitic imidazole frameworks (ZIFs) provide an exciting platform to design and fabricate non-precious-metal carbon-based catalysts for oxygen reduction/evolution reaction (ORR/OER). Herein, we elaborately design a facile enzyme-assisted synthetic strategy that enables to tailor the ZIFs precursors into structural stable decussation shape, which derived Co nanoislands grafted on decussate N-doped carbon nanoleaves (D-Co@NC) can well retain the interpenetrating nanostructure. Benefiting from the combined advantages of compositions and interpenetrating nanostructures, D-Co@NC possesses 5.2 times higher exposed electrochemical active area than the conventional dodecahedral one, thus endowing... 

Fractional flow reserve (FFR)-based decision improves the outcomes of percutaneous coronary intervention (PCI) for some patients, while its effectiveness in improving the results of coronary artery bypass graft (CABG) is unclear, in particular for moderate stenosis. It may be due to the fact that FFR cannot take into account the impacts of competitive flow (CF), intimal hyperplasia (IH), as well as compliance mismatch (CMM). As a result, two questions arise 1) whether FFR is a sufficient factor to decide to perform the CABG for patients with moderate to severe stenosis or not and 2) whether post-operative FFR shows the effectiveness of a graft. To shed light on this matter, two... 

Salep phosphate modified biopolymers with different phosphate contents were prepared via reacting salep (a multi-component polysaccharide obtained from dried tubers of certain natural terrestrial orchids) with a solution of primary and secondary sodium phosphates under basic conditions in a semidry process. Structural characterization of salep phosphates were carried out by 31P NMR, FT-IR spectra and TGA curves. Determination of the phosphate content in samples was done by a standard spectrophotometric method. Then, novel (salep phosphate)-based hydrogels were synthesized by graft copolymerization of acrylic acid (AA) monomer onto salep phosphate backbones. Effect of the phosphate contents...