Sharif Digital Repository

In this paper, Ti-6Al-4V/TiC composite was fabricated by VIM furnace and graphite crucible. X-ray diffraction analysis and EDS techniques were used to identify the phases in the material. Microstructure characteristics of the Ti-6Al-4V/TiC composite were evaluated by means of optical microscopy. The tensile test was performed at room temperature after hot-rolling of the samples in the beta phase field. The results revealed that at different melting times, three kinds of precipitates are formed in the microstructure including grain boundary, eutectic and transgranular precipitates. The size of transgranular precipitates was significantly larger than that of the other two types of carbides and... 

The effect of mould preheating temperature, casting modulus and graphite addition method on surface decarburisation during lost wax casting of CK 45 steel has been investigated. For this purpose, a novel image analysis program was developed to determine the carbon concentration profile. It was observed that on increasing the preheating temperature and casting modulus, the depth of decarburisation increases significantly. This behaviour was related to the decreased cooling rate of the samples which enhances the loss of carbon by reaction with the surrounding atmosphere. It was also found that the distribution of graphite in different layers of the mould and the distance of these layers from... 

A new polymer with C 4H stoichiometry based on graphene is synthesized in situ using template-induced polymerization of self-organizing hydrogen adsorbates on graphene. The polymerization is observed "live" on the surface of graphene by photoemission spectroscopy. Photoemission spectroscopy allows for an accurate determination of the carbon/hydrogen stoichiometry, an aspect that is extremely important for understanding functionalized graphene  

We have prepared a pyrolytic graphite electrode (PGE) whose surface is covered with a thin film of a nano-mixture of graphite/diamond (NGD). The electrode is shown to be capable of electrochemically sensing of tryptophan (TRP) and 5-hydroxytryptophan (HTRP). The presence of the NGD film resulted in a remarkable increase in the peak currents and sharpness of the waves so that submicromolar concentrations of TRP and HTRP become detectable. Potential scan rates, the pH of the solution, the accumulation conditions and the amount of the modifier were optimized via cyclic voltammetry. Linear sweep voltammetry, under optimized accumulation time and in open circuit operation, was applied to the... 

The electrochemical response of sodium levo-thyroxin (T4) at the surface of an edge plane pyrolytic graphite (EPPG) electrode is investigated using cyclic voltammetric technique in the presence of 0.1M HCl as supporting electrolyte. T4 underwent totally irreversible oxidation at this system and a well-defined peak at 821mV was obtained. Compared to the signals obtained in the optimized conditions at bare glassy carbon and carbon paste electrodes, the oxidation current of T4 at an EPPG electrode was greatly enhanced. The electrochemical process of T4 was explored and the experimental conditions were optimized. The oxidation peak current represented a linear dependence on T4 concentration from... 

This paper addresses the fabrication of bronze-nano-graphite coatings containing 30. nm sized graphite particles. Addition of Poly Vinyl Pyrrolidone (PVP) and dispersing the suspension by ultrasound was utilized to stabilize the electroplating solution. Pulsed current electrodeposition was used and the deposits were characterized in terms of graphite content, particle dispersion in coating and morphology. The wear behavior of the coating was compared to bronze-micro-graphite coatings prepared with the same experimental conditions. The present coating showed improved wear resistance in comparison to bronze-micro-graphite coatings at the same graphite content  

Single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) were synthesized in aqueous solutions containing FeCl2, FeCl3, FeSO4 and Fe2(SO4) 3. The effects of iron charge and the counter ions on the formation of carbon nanotubes (CNTs) were investigated. Thermogravimetric (TG) analysis indicated that carbon multilayer structures including CNTs and multishell graphite particles were formed in deionized (DI) water without the iron precursor. SWCNTs were also synthesized in the presence of the iron ions. It was also found that the mole ratio of [Fe2+]/[Fe3+] in the solution has a significant influence on the purity of CNTs and the process yield. The highest yield was... 

The effect of mold hardness on the microstructure of ductile iron and the contraction porosity was investigated. Molds with different hardnesses (0.41, 0.48, 0.55, 0.62 MPa) and a sand mold prepared by Co2 method were used. The influence of silicon content on the induced expansion pressure owing to the formation of graphite was also investigated. The contraction during solidification can be compensated by an induced expansion owing to the graphite relief when the hardness of mold increases; therefore, the possibility of achieving a sound product without using any riser increases  

Electro-oxidation of alcohols (methanol, ethanol, 1-propanol and 2-propanol) on nickel dispersed into a thick layer of poly-o-aminophenol on graphite electrode (GE/POAP-SDS/Ni) was investigated. Ni-doping into the polymeric film was achieved chemically followed by enrichment of Ni(III) through cycling the potential. The electro-oxidation of alcohols on GE/POAP-SDS/Ni were found to be dominated by direct electro-oxidation with some contribution from Ni(II)/Ni(III) couple. Rate constants for the electro-oxidation of methanol, ethanol, 1-propanol and 2-propanol as derived by chronoamperometry were 1.65 × 105, 1.31 × 105, 2.53 × 104 and 1.40 × 104 cm3 mol-1 s-1, respectively. Impedance... 

Models capable of accurate simulation of microcantilever dynamics coupled with complex tip-sample interactions are essential for interpretation and prediction of the imaging results in amplitude modulation or tapping-mode atomic-force microscopy (AM-AFM or TM-AFM). In this paper, four approaches based on combinations of lumped and finite element methods for modelling of cantilever dynamics, and van derWaals and molecular dynamics for modelling of tip-sample interactions, are used to simulate the precise imaging by AM-AFM. Based on the simulated imaging and force determination, the efficiency of different modelling schemes is evaluated. This comparison is performed considering their... 

Abstract A sensitive electrochemical sensor for determination of phenothiazine (PTZ) was introduced based on molecularly imprinted polymer (MIP) film. A computational study was performed to evaluate the template-monomer geometry and interaction energy in the prepolymerization mixture. The electrode was prepared during electropolymerization of pyrrole (Py) on a pencil graphite electrode (PGE) by cyclic voltammetry (CV) technique. The quantitative measurements were performed using differential pulse voltammetry (DPV) in Britton-Robinson (BR) buffer solutions using 60% (v/v) acetonitrile-water (ACN/H2O) binary solvent. The effect of important parameters like pH, monomer... 

Polyethylene oxide (PEO)/chitosan (CS)/graphene oxide (GO) electrospun nanofibrous scaffolds were successfully developed via electrospinning process for controlled release of doxorubicin (DOX). The SEM analysis of nanofibrous scaffolds with different contents of GO (0.1, 0.2, 0.5 and 0.7 wt.%) indicated that the minimum diameter of nanofibers was found to be 85 nm for PEO/CS/GO 0.5% nanofibers. The π-π stacking interaction between DOX and GO with fine pores of nanofibrous scaffolds exhibited higher drug loading (98%) and controlled release of the DOX loaded PEO/CS/GO nanofibers. The results of DOX release from nanofibrous scaffolds at pH 5.3 and 7.4 indicated strong pH dependence. The... 

Reduced graphene oxide nanomeshes (rGONMs), as p-type semiconductors with band-gap energy of ~1. eV, were developed and applied in near infrared (NIR) laser stimulation of human neural stem cells (hNSCs) into neurons. The biocompatibility of the rGONMs in growth of hNSCs was found similar to that of the graphene oxide (GO) sheets. Proliferation of the hNSCs on the GONMs was assigned to the excess oxygen functional groups formed on edge defects of the GONMs, resulting in superhydrophilicity of the surface. Under NIR laser stimulation, the graphene layers (especially the rGONMs) exhibited significant cell differentiations, including more elongations of the cells and higher differentiation of... 

Bacteriorhodopsin (bR) molecules were utilized as light-driven proton pumps for green as well as effective reduction of single-layer graphene oxide (GO) sheets. The bR molecules and graphene sheets were separated from each other in an aqueous environment by using a polytetrafluoroethylene membrane filter, in order to prevent their direct interactions (including attachment of the bR molecules onto the GO). Although reduction of GO using hydrazine or bR showed similar deoxygenation levels (based on X-ray photoelectron spectroscopy), the former resulted in formation of CAN bonds which can substantially decrease the electrical conductivity of the reduced sheets. The electrical characteristics of... 

A soil microbial fuel cell was investigated that uses soil and groundwater to generate electricity. The cathode surface area and materials are always important for increasing power. Power density was shown to be a linear function of cathode surface area. Biofilm formation on the graphite cathode was observed to be helpful in enhancing power output and maximum performance reached 89.2 mW/m2. As an application for the insertion-type soil microbial fuel cell, nitrate removing was investigated in cathode. Nitrate was reduced in an aerobic cathode at the rate of 37.5 mg nitrate/lit/day and 55 mg nitrate/lit/day in anaerobic cathode  

The electrocatalytic oxidation of methanol was studied over Ni, Co and Cu binary or ternary alloys on graphite electrodes in a NaOH solution (0.1 mol/L). The catalysts were prepared by cycling the graphite electrode in solutions containing Ni, Cu and Co ions at cathodic potentials. The synergistic effects and catalytic activity of the modified electrodes were investigated by cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS). It was found that, in the presence of methanol, the modified Ni-based ternary alloy electrode (G/NiCuCo) exhibited a significantly higher response for methanol oxidation compared to the other samples. The anodic peak... 

Abstract H2-rich water as a green antioxidant was applied for deoxygenation of graphene oxide (GO) suspensions. The ability of H2-rich water for deoxygenation of GO sheets was found comparable to the ability of hydrazine (as a standard and powerful reductant), using X-ray photoelectron spectroscopy. In fact, the O/C ratio of GO sheets could be reduced from 0.51 to 0.21 and 0.16 by H2-rich water and hydrazine, respectively. More importantly, while C-N bond formation is one of the side effects of GO reduction by hydrazine, no chemical C-N bond was found on the H2-water-reduced GO (rGO) sheets. This also resulted in a better restoration of the graphitic structure of the H2-water-rGO, as... 

The voltammetric performance of edge-plane pyrolytic graphite (EPG) electrode via adsorptive stripping voltammetry was investigated for study of the electrochemical behavior of omeprazole (OMZ) in aqueous solution. The results revealed that the oxidation of OMZ is an irreversible pH-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mechanism. The determination conditions, such as the pH values of the supporting electrolyte, accumulation time and scan rate were optimized. Simplicity, high reproducibility and low detection limit (3 nM) of the electrode response as well as wide linear range (0.01 to 4.0 µM) can be stated as significant... 

When aircrafts reach the end of their service life,fatigue cracks are found to have developed along rivet holes andother highly stressed regions of aircrafts.In order to extend the life of these aircrafts, repairs should be made to arrest these cracks.Composite doublers or repair patches provide an innovative repair technique,which can enhance the waywhich aircrafts are maintained.Bonded repair of metallic aircraft structure is used to extend the life of flawed or under-designed components at reasonable cost.Such repairs generally have one of three objectives: fatigue enhancement,crack patching or corrosion repair.Repair of cracked structure may be performed,by bonding an external patch to... 

One of the important parts of each transformer is core. It is made from multilayer silicon steel sheets. Silicon steel has high magnetic permission, high electrical resistance and minimum hysterics loss. In different metal forming process, lubrication is done for reducing friction effects. In this research, effect of 3 different type lubricants, mineral material (castor oil), organic material (glycerol), and semi organic material (paraffin) with and without additive (graphite) is investigated. Also, effect of 2 industrial lubricants (suds and motor oil) is compromised with above lubricants. Results show the best lubricant for second cold rolling of silicon steel is semi organic (paraffin)...