Sharif Digital Repository

Greenhouses are complex systems that require considerable amounts of energy. In order to optimize their performance, it is necessary to reduce the amount of energy per unit of crop produced. This requires a combined assessment of greenhouse energy balance and crop growth, as well as their interaction. In this work, more than 30 existing greenhouse models are reviewed and different algorithms are combined to propose an integrated energy-yield model. The physical model of greenhouse energy demand is based on the dynamic energy and mass balance while yield production is based on a physiological crop model. The integrated model is validated with observed energy demand and crop yield datasets... 

Global warming escalation has extended average temperature of earth beyond its safe limit. To avert this environmental-threat, solar energy has acquired substantial attention of remarkable researchers in this century. To effectively utilize solar energy by transforming into thermal and electrical energy, the involvement of nanofluids having intensified thermal, optical and magnetic properties, has become very popular. The foremost objective of this article is to provide a comprehensive review on the applications of nanofluids in solar energy systems like solar collectors, photovoltaic cells, solar stills, and thermal energy storage, which are thoroughly discussed in this paper. The effect of... 

One of the primary factors affecting the amount of worldwide energy consumption and greenhouse gas emissions is cooking. Solar cooking is an appropriate solution because it is both inexpensive and expandable. To illustrate modern advancements and the current status of solar cooking technology, this paper presents a review of recent experimental and analytical socioeconomic studies on solar cookers. The experimental studies have been divided into three categories based on different solar cooker structures: (i) box types, (ii) concentrating types, and (iii) panel types. Next, different designs are investigated according to their direct or indirect heat transfer modes and optional equipment for... 

In this research, a confined aquifer with low groundwater flow was considered to meet the cooling and heating requirements of residential complexes. The complexes were located in the cities of Ahvaz, Ardabil, Bandar Abbas, Esfahan, Kerman, Rasht, Tehran, and Zahedan. The complex in Ardabil mostly required heating, the ones in Ahvaz and Bandar Abbas mostly required cooling, and the complexes in other cities required both heating and cooling. Four different alternatives of Aquifer Thermal Energy Storage (ATES) were analyzed in this study. These alternatives consisted of using ATES: 1) alone for cooling, 2) coupled with a conventional refrigeration system or a chiller for cooling, 3) by... 

In this research, a confined aquifer with low groundwater flow was considered to meet the cooling and heating requirements of residential complexes. The complexes were located in the cities of Ahvaz, Ardabil, Bandar Abbas, Esfahan, Kerman, Rasht, Tehran, and Zahedan. The complex in Ardabil mostly required heating, the ones in Ahvaz and Bandar Abbas mostly required cooling, and the complexes in other cities required both heating and cooling. Four different alternatives of Aquifer Thermal Energy Storage (ATES) were analyzed in this study. These alternatives consisted of using ATES: 1) alone for cooling, 2) coupled with a conventional refrigeration system or a chiller for cooling, 3) by... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

Supplying sustainable energy is of a critical prominence nowadays. A main outcome of the galloping development in energy generation technologies is the ability to integrate multi-carrier energy systems that facilitates meeting the fast growth of energy demand. Energy hub is one of the main infrastructures making the incorporation of multi-carrier systems smoother. In this paper, the optimal scheduling problem of an energy hub structure equipped with combined heat and power, boiler, power-to-gas storage, thermal energy storage and electrical energy storage in order to supply power, heat and gas demands is presented. Power to gas is regarded as a new technology that creates a connection... 

In this study, silicon microchannel heat sink (MCHS) performance using nanofluids as coolants was analyzed. The nanofluid was a mixture of nanoscale Cu particles and pure water with various volume fractions. Based on theoretical models and experimental correlations, the heat transfer and friction coefficients required in the analysis were used. In the theoretical model, nanofluid was treated as a single-phase fluid. In the experimental correlation, thermal dispersion due to particle random motion was included. The microchannel heat sink performances for a specific geometries with Wch = W fin = 100 μm and Lch =300 μm is examined. In this study, flow in laminar and turbulent regimes using the... 

In modern heat transfer systems, thermal storage not only causes the balance between demand and supply, but also improves the heat transfer efficiency in these systems. In the present study, a comprehensive review of the applications of micro- or nano-encapsulated phase change slurries (MPCMs/NPCMs), as well as their effects on thermal storage and heat transfer enhancement, has been conducted. MPCMs/NPCMs have a myriad of applications and various usages such as pipe and channel flows, photovoltaic/thermal, solar heaters, air conditioning systems, storage tanks and heat pipes that have been categorized and studied. It was found that there are many advantageous adding MPCM/NPCM to the base... 

Latent thermal energy storage dependent on Phase Change Materials (PCMs) proposes a possible answer for modifying the availability of alternating energy from renewable sources such as wind and solar. They can possibly store large amounts of energy in moderately tiny dimensions as well as through almost isothermal procedures. Notwithstanding, low thermal conductivity values is a significant disadvantage of the present PCMs which critically restrict their energy storage usage. Likewise, this unacceptably decreases the solidification/melting rates, hence causing the system response time to be excessively lengthy. The present examination accomplished a better PCM solidification rate with a... 

A vapor-compression cooling system utilizing PCM is studied whereby the electricity consumption peak load is shifted. More specifically, the dynamic performance of the cooling system with and without PCM is evaluated and is presented with details on the hottest day of the year in Tehran, Iran. The proposed system uses the cooling energy to freeze or “discharge” the PCM during nighttime when the cooling load is minimally needed and uses the stored cooling energy during the peak load hours by melting or “charging” the PCM. This leads to better performance during the peak load hours when higher cooling loads are required. Oleic acid was chosen as PCM. The simulation was performed in EES... 

Radiative sky cooling (RSC) systems have enjoyed a privileged position in the research community due to generating cooling energy without consuming electricity using the open atmospheric window and infrared emission to the sky. However, the system's justification occurs when it reaches a temperature below the minimum 24-hour ambient temperature. This study utilizes phase change materials (PCM) as the energy storage of a hybrid daytime photovoltaic-thermal and nighttime RSC module and investigates the nocturnal cooling energy-saving potential of the system at different phase transition temperatures. After being validated by the experimental data in the literature, the simulated model was used... 

Despite the fact that solid–liquid phase change materials (PCMs) have various applications in thermal energy storage systems, the low solidification rate of PCMs, which is due to the low thermal conductivity has limited the range of applications of PCMs. One of the methods of increasing the solidification rate of PCMs is using a boiling fluid as an intermediary between the solid–liquid PCM and the condenser to prevent the direct contact between the phase change material and the condenser tubes, this method is also known as the intermediate boiling fluid (IBF) method. The IBF method has been shown to significantly increase the solidification rate (2 orders of magnitude). In this study, the... 

This paper presents a numerical simulation approach to investigate the water effect as an auxiliary fluid in direct contact with various phase change materials (PCMs). The technique is defined as a hybrid method due to the using of an external intermediary for melting process improvement. Oleic acid (OA), coconut oil (CO), hexadecane, and heptadecane are selected as PCMs due to immiscibility in water and differences in density, melting point, and enthalpy of fusion. An auxiliary fluid is embedded above PCM in an enclosure subjected to sinusoidal wall temperature for melting rate increase through density differences improving heat transfer rate due to materials displacement during process.... 

Improving the discharge process of phase change materials (PCMs) is of great importance and can be effective for thermal energy storage (TES) systems. In this research, the direct-contact method for acetone droplet on molten paraffin is optimized to enhance the efficiency of the discharge process of PCMs and TES systems working with intermediate boiling fluid (IBF). In order to improve the storage rate and increase the freezing rate in the system, the NSGA-II algorithm is used. When the acetone droplet hits, owing to its low boiling point relative to the temperature of molten paraffin, the acetone evaporates, causing the creation of solidified paraffin area. The main goal of the current... 

Higher than a standard level, the humidity provides a suitable environment for the pathogenic microorganisms to grow and increases energy consumption for cooling, increasing greenhouse gas emissions. Desiccant air-conditioning (DAC) is an effective method to reduce humidity and energy simultaneously. Conventional desiccants are not suitable for use as a desiccant in building air conditioners, mainly because of high regeneration temperature and other issues such as limited equilibrium capacity and hydrothermal and cyclic instability. Metal-organic frameworks (MOFs) are a novel class of porous crystalline materials without the disadvantages of traditional desiccants. They benefit from a huge... 

Today, the interest on distributed generation has been increasing, especially due to technical development on generation systems that meet environmental and energy policy concerns. One of the most important distributed energy technologies is Combined Heat and Power (CHP). CHP is small and self-contained electric generation plan that can provide power for household applications, commercial or industrial facilities and hence its applications are overtly increasing. It can reduce power loss and enhance service reliability in distribution systems. One of the influential factors for the users is the purchasing cost of CHP which is largely dependent on its type, capacity and efficiency. Therefore... 

Aquifers are underground porous formations containing water. Confined aquifers are surrounded by impermeable layers on top and bottom, called cap rocks and bed rocks. A confined aquifer with a very low groundwater flow velocity was considered to meet the annual cooling and heating energy requirements of a residential building complex in Tehran, Iran. Three different alternatives of Aquifer Thermal Energy Storage (ATES) were employed to meet the heating/cooling demands of the buildings. These alternatives were using ATES for: Cooling alone, heating alone by coupling with at-plate solar collectors, and cooling and heating by coupling with a heat pump. For the economic evaluation of the... 

One of the efficient solar energy harvesting technics is the parabolic trough concentrated solar power plant. However, if the concentrated solar power plant were not equipped with a storage system, the power plant capacity factor would be deficient. Latent thermal energy storage system using phase change material (PCM) is a high energy density storage system to provide durable energy with a constant temperature. In this study, first, a dynamic analysis is performed implementing TRNSYS software on the parabolic trough concentrated solar power plant located in Shiraz, Iran. Consequently, this system is assisted by the latent thermal energy storage system to improve its performance and capacity... 

Massive amounts of spent lead-acid battery separators with 50 wt % silica nanoparticles (SiNPs) can be recycled for further use. One compelling application is form-stable phase change materials (FSPCMs). This study proposes a novel tertiary eutectic mixture of green and non-toxic lauric acid, palmitic acid, and paraffin, and recycled SiNPs to find a sustainable approach to deal with industrial wastes and energy consumption. Fatty acids and paraffin are promising for thermal energy storage in buildings. However, they lack sufficient thermal conductivity, mechanical strength, and suffer from leakage. To give mechanical strength, high-density polyethylene (HDPE) was added and sintered....