Sharif Digital Repository

Determining the shape factor is essential for solving radiative heat transfer problems. An important case that has various applications in the heat power plant systems is calculation of the configuration factor between the fins and the in-plane parallel semi-cylinder. In the present work, Monte Carlo method, Cross string method, and analytical solutions were implemented for this problem. Several simulations were performed by varying semi-cylinders radius and different lengths of the fin. Also, the influence of the number of emitting rays and the number of strips was studied. Considering a fin between two tubes, it is found that calculating the view factor between one tube and a fin is... 

Estimating efficiency of an operating column has to be distinguished from that of a column being designed. This crucial point has been totally overlooked in the literature. All the methods and models available for predicting the Murphree efficiencies of tray columns have been developed for the design case. They generate their own mass and heat transfer rates and empirical parameters rather than produce true transfer rates by using operating column (realistic) data, especially the specifications of outlet streams. In addition, most of these methods are limited in application and insufficient in accuracy, especially if applied outside the range of conditions under which they were formulated.... 

The current study aims at introducing a 2D and fast-running code for the issues pertinent to design, analysis and safety in modular high temperature reactors. While the porous media approach is only applied to pebble bed type, the analysis in this paper covers both pebble bed and prismatic reactor. A time-dependent mass equation along with energy conservation equation for the cooling gas and a time-dependent energy conservation equation for the solid was solved. Appropriate series of constitutive equations (e.g. heat transfer coefficient, effective heat conductivity of solid, heat transfer coefficient, pressure drop etc.) has been recruited as well. In addition a finite-volume method is... 

A fully analytical solution of the classic coupled thermoelasticity problem in a rotating disk subjected to thermal and mechanical shock loads is presented. Axisymmetric thermal and mechanical boundary conditions are considered in general forms of arbitrary heat transfer and traction, respectively, at the inner and outer radii of the disk. To solve the governing system of equations, an analytical procedure based on the Fourier-Bessel transform is employed. Closed form formulations are presented for temperature and displacement fields. The results of the present formulations are in good agreement with the numerical results available in the literature. The radial distribution and time history... 

A precise thermal-hydraulics model is of great importance for developing more effective designs of High Temperature Gas Cooled Reactors (HTGR). Recently, several advancements have been made in the methods of analysis of porous media which could be of significant value in the development of more precise and robust codes. The objective of this research is to incorporate some of the most recent improvements in the development of a new 2D program for thermal-hydraulics analysis of modular high temperature reactors. The program is mainly based on the solution of a coupled set of mass, energy and momentum conservation equations for the gas flow, along with the energy conservation equation in the... 

A gas turbine shaft is generally exposed to high-temperature gases and may seriously be affected and overheated duetotemperature fluctuationsinthe combustion chamber. Vortex flow inthe combustion chamber may increase the heat release rate and combustion efficiency, as well as control the location of energy release. However, this may result in excessive temperature on the combustor equipment and gas turbine shaft. In this study, a new gas turbine combustion chamber implementing a liner around the shaft and the liquid-fuel feeding system is designed and fabricated. The influences of parameters such as the Reynolds number and the equivalence ratio are studied. Experimental results are compared... 

A numerical simulation has been carried out to investigate the heat transfer enhancement in a shell-and-tube heat exchanger using a porous medium inside its shell and tubes, separately. A three-dimensional geometry with k-ε turbulent model is used to predict the heat transfer and pressure drop characteristics of the flow. The effects of porosity and dimensions of these media on the heat exchanger's thermal performance and pressure drop are analyzed. Inside the shell, the entire tube bundle is wrapped by the porous medium, whereas inside the tubes the porous media are located in two different ways: (1) at the center of the tubes, and (2) attached to the inner wall of the tubes. The results... 

In this work, two-dimensional laminar flow and heat transfer across a heated square cylinder, covered by a porous layer in a plane channel have been numerically investigated. The flow and thermal fields inside the porous layer were simulated using BrinkmaneForchmeyer extended Darcy model. Simulations were performed in different Reynolds numbers (Re = 60, 120, 160, and 200), porosities (ω = 0.7, 0.87, and 0.96), solid to fluid thermal conductivity ratios (λR = 10, 200, and 2000) and blockage ratios (BR = 0.5, 0.25 and 0.125). The effects of the mentioned parameters on pressure drop and heat transfer rate were investigated in detail. Also, the contribution of each side of the central squared... 

The paper presents a computational model and the corresponding algorithm for estimating the arc energy distribution to conductive, convective and radiative heat transfer in an electric arc furnace (EAF). The proposed algorithm uses channel arc model (CAM) in order to compute the distribution of the arc energy through empirical equations (to approximate arc radius), ideal gas law (to approximate arc density) and results of magneto-hydro-dynamic (MHD) models (to approximate arc pressure, temperature and velocity). Results obtained using the proposed algorithm are comparable with other similar studies; however, in contrast to other arc-energy distribution models, this model requires only two... 

This research investigated the forced convection heat transfer by using the swirling impinging jets. This study focused on nozzles, which equipped with twisted tapes via a numerical approach. The computational domain created by utilizing the fully structured meshes, which had very high quality from the viewpoint of aspect ratio and skewness. The numerical simulations were performed at four different jet-to-plate distances (L/D) of 2, 4, 6 and 8, four Reynolds numbers of 4000, 8000, 12,000 and 16,000, and also four different twist ratios (y/w) of 3, 4, 5 and 6. The mesh-independent tests were conducted based upon the average Nusselt number. The obtained results revealed good agreement with... 

In this study, exergy analysis and second law efficiency of gas heaters with reactive combustion processes are considered. The reactive combustion of natural gas is modeled via a chain of eight chemical reactions along with first and second law of thermodynamics. The main constitutional elements react in combustion chamber is considered at constant pressure and temperature of the basic elements hydrogen, carbon, oxygen, and nitrogen from the fuel and air. Heat transfer is modeled assuming free convection and radiation mechanisms from gas heater outer surfaces. The governed equations were solved using Engineering Equation Solver (EES) software tool. Results of this study reveal that... 

Green iron oxide pellets are indurated with thermal treatment in pelletizing plant to achieve sufficient mechanical properties and to be used in iron-steel industry. In the first stage, the pellets are dried with hot air coming from the firing unit. High heat transfer makes the evaporation rate exceeding the outgoing steam rate from the pellets and as a result, increasing the inner pressure of the pellets and fragment. On the other hand, low heat transfer causes low production rate. Using the related equations and considering the pellets' moisture and porosity and applying the pellets' condition on parameters such as specific heat capacity and heat conductivity, an acceptable standard is... 

The spectral line based weighted sum of gray gases (SLW) model is considered as an advanced model, which can solve the radiative transfer equation (RTE) in non-gray participating media by dividing the absorption cross section spectrum into a limited number of intervals. Each interval is then treated as a gray gas medium, in which the attributed RTE should be solved separately. Therefore, the SLW model would be computationally more efficient than the other non-gray participating media solvers because it is faced with a small number of RTE solutions. In this work, we present a novel optimized SLW model and applied it to radiation heat transfer calculation in a model furnace. The current... 

We provide the simulation of electroosmotic phenomenon in nanochannels using the Dissipative Particle Dynamics (DPD) method. We study the electroosmotic phenomenon for both newtonian and non-newtonian fluids. Literature shows that most of past electroosmotic studies have been concentrated on continuum newtonian fluids. However, there are many nano/microfluidic applications, which need to be treated as either non-newtonian fluids or non-continuum fluids. In this paper, we simulate the electroosmotic flow in nanochannel considering no limit if it is neither continuum nor non-nonewtonian. As is known, the DPD method has several important advantages compared with the classical molecular dynamics... 

Thermopneumatic micropump is one type of positive displacement micropump, which has many applications due to its relatively large stroke volume, low working voltage, and simple fabrication in microscale. In this paper, a numerical study of heat transfer and fluid flow in a valveless thermopneumatically driven micropump is presented. For rectifying the bidirectional flow, a nozzle and a diffuser are used as the inlet and outlet channels of the chamber. Since the fluid flow is induced by the motion of a diaphragm, the numerical simulation includes fluid structure interaction, which requires applying a dynamic mesh. The domain of solution is divided into two sections; the actuator unit, which... 

Numerical investigation of fluid flow structure and convective heat transfer due to a circular jet impinging on a rotating disk is performed. Temperature and convection heat transfer coefficient are calculated. Flow is considered to be steady, incompressible and turbulent. k-ε RNG model is used to model the turbulent flow. Results are compared with experimental data showing good agreement. Two new criteria are introduced and used to evaluate the performance of cooling process, the first is maximum temperature difference on the disk, and the second is the average temperature of the disk. The first parameter shows the uniformity of temperature distribution in the disk and the second shows the... 

Gas turbine shaft is generally exposed to high temperature gases and may seriously be affected and overheated due to temperature fluctuations in the combustion chamber. Considering vortex flow in the combustion chamber, it may increase the heat release rate and combustion efficiency and also control location of energy release. However, this may result in excess temperature on the combustor equipments and gas turbine shaft. Vortex flow in the vortex engine which is created by the geometry of combustion chamber and conditions of flow field is a bidirectional swirl flow that maintains the chamber wall cool. In this study a new gas turbine combustion chamber implementing a liner around the shaft... 

Studies on two-phase flow in small scale pipes have become more important, because of the application of mini-scale devices in several engineering fields including, high heat-flux compact heat exchangers, and cooling systems of various types of equipment. In a mini pipe the behavior of two phase flow is not the same as flow in conventional pipes. The difference is caused by different effective forces; for e. g. inside a mini pipe capillary forces are more important in comparison with gravitational forces. This paper is devoted to numerical simulation of gas-liquid two phase flow in a vertical mini pipe. Prediction of bubble shape and the effects of gas and liquid velocities on flow... 

We investigate heat transfer between parallel plates separated by liquid argon using two-dimensional molecular dynamics (MD) simulations incorporating with 6-12 Lennard-Jones potential between molecule pairs. In molecular dynamics simulation of nanoscale flows through nanochannels, it is customary to fix the wall molecules. However, this approach cannot suitably model the heat transfer between the fluid molecules and wall molecules. Alternatively, we use thermal walls constructed from the oscillating molecules, which are connected to their original positions using linear spring forces. This approach is much more effective than the one which uses a fixed lattice wall modeling to simulate the... 

this research chamber effective length, which is the minimum chamber length required for complete combustion, for a dilute monopropellant spray, constant area, one dimensional and fixed volume engine is analytically predicted. A new evaporation rate in the form of dk +1 relation, instead of d 2 law, is introduced. In case of controlling the vaporization by radiative heat transfer, k is equal to zero, and when molecular processes control the vaporization, k will be equal to unity and in some cases the vaporization data need the value of k greater than one to fit properly to related equation. Development of this approach can be used in design of combustion chambers with optimum length and with...