Sharif Digital Repository

We determined the mechanism of mechanochemical synthesis of fluorapatite from CaO, CaF2 and P2O5 by characterisation of the intermediate compounds. We used atomic absorption spectroscopy, X-ray diffraction, field emission scanning electron microscopy, FTIR spectroscopy and transmission electron microscopy to find the transitional compounds. Investigation of the binary and ternary powder mixtures revealed the appearance of H3PO4, Ca(OH)2, Ca2P2O7 and CaCO3 as the intermediate compounds. At early stages of the milling, conversions of P2O5 to H3PO4 and CaO to Ca(OH)2 occurred in the wet atmosphere. Later, a combination of Ca(OH)2 and H3PO4 formed Ca2P2O7 while the unreacted CaO was converted to... 

Severe shot peening (SSP) process is widely used for surface nanocrysallization of a bulk material that demonstrates excellent mechanical properties compared with its coarse-grained equivalents. In this study, a plastically deformed surface was produced with nanostructured grains on different materials of AISI 1045, 1050, and 1060 carbon steels by means of SSP. Shot peening was applied with a wide range of Almen intensities and coverages. Optical microscopy, scanning electron microscopy, field emission scanning electron microscopy, high resolution transmission electron microscope observations, and X-ray diffraction analysis were employed to analyze the mechanism of grain refinement... 

The ability of an active protective organic coating to restore its protection functionality in case of a coating defect is of pivotal importance to ensure durable performance under demanding corrosive conditions. In this paper, a self-healing epoxy system is fabricated by separate encapsulation of epoxy and polyamine in carbon hollow spheres (CHSs) and the autonomous healing performance of the system applied on mild steel is investigated. CHSs were synthesized via a silica templating method using carbonization of polysaccharide shells formed on the surface of silica templates. Consequently, epoxy and polyamine were loaded in separate capsules by dispersion of CHSs into the dilute solutions... 

Vanadium supported on spinel cobalt ferrite nanoparticles was synthesized and characterized using Fourier transform infrared spectroscopy, X-ray diffraction, energy-dispersive X-ray analysis and transmission electron microscopy. For the first time, the prepared material was used for the catalytic degradation of methylene blue as an organic dye in the presence of hydrogen peroxide as a green oxidant and NaHCO3 as a co-reagent at room temperature. The dependency of removal percentage on various parameters such as amount of catalyst, pH, reaction time and temperature and the effect of radical scavenging agents were studied. Finally, recoverability and reusability of the vanadium supported on... 

The highly sensitive impedimetric biosensor in label free approach for hepatitis B virus DNA (HPV DNA) detection based on tellurium doped ZnO nanowires was fabricated. The NWs were grown by hybrid thin film oxidation in the physical vapor deposition (PVD) mechanism. The morphology characterization of the synthesized NWs was performed by field emission scanning electron microscopy (FESEM) and the images demonstrated that the diameter and the length of the materialized NWs were around 50 nm and several micrometers, respectively. The high-resolution transmission electron microscopy (HRTEM) image indicated that the fabricated NWs were crystalline and their phase characterization was validated by... 

Magnetic micelle nanoparticles with thermoresponsive behavior were designed for thermo-triggered paclitaxel delivery. For this purpose, thermoresponsive triblock copolymer poly(N-isopropyl acrylamide)-b-polycaprolactone-b-poly(N-isopropyl acrylamide) was prepared. The magnetic micelle was formed by self-assembly of triblock copolymer on the magnetite which was coated by oleic acid. The size of the magnetic micelle was between 30–40 nm reported by transmission electron microscopy. Also, dynamic light scattering indicated the hydrodynamic diameter was thermal dependent. Moreover, the drug release profile showed thermo-triggered release of paclitaxel. Thus, the smart nanocarrier has potential... 

Developing advanced electrode materials with metal–organic frameworks (MOFs) has increasingly attracted attentions as an effective method for improving supercapacitors performances. However, their poor conductivity has limited their use in energy applications. In this paper, an effective strategy is presented to reduce the electric resistance of MOFs by the in situ synthesis of Ni-based MOFs with graphene (Ni-MOF/graphene). The fabricated Ni-MOF/graphene composite was characterized by powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), Raman spectra, Brunauer–Emmett–Teller (BET) and... 

Hexagonal core–shell SiO2[–MOYI]Cl–]Ag nanoframeworks were synthesized via surface modification of hexagonal silica nanoparticles prepared from perlite (EP) as a cheap and abundant raw material. The prepared samples were well characterized by X-ray diffraction powder (XRD), energy dispersive X-ray (EDX), diffuse reflectance spectroscopy (DRS), Brunauer–Emmett–Teller (BET) specific surface area analysis, fourier transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). The XRD patterns confirmed that Ag and AgCl crystalline phases were successfully loaded on the surface. The TEM images were also implied that the... 

A new non-enzymatic sensor for glucose is prepared by using of Ni(II)-one dimensional coordination polymer (Ni(II)-Cp) and C 60 . The Ni(II)-Cp prepared by slow diffusion and evaporation of two solution layers of NiCl 2 and diaza-macrocycle bearing two pyridine side arms (as the reported tecton) in DMF. The Ni(II)-Cp was characterized by powder x-ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) as well as Fourier transform infrared spectroscopy (FT-IR). C 60 as modified was added to Ni(II)-Cp for improving the electrical and chemical stability of the composite. The newly assembled Ni(II)-Cp/C 60 also coated on glassy carbon electrode (GC) to... 

A study has been carried out of the effect of an anodizing pre-treatment in a sulphuric acid electrolyte on the strength of AA 5052 alloy/polypropylene joints prepared using friction stir spot welding. Lap-shear tests were used to determine the joint strength. Comparisons were made with joints pre-treated using sand blasting. The failed specimens were examined by scanning and transmission electron microscopy. Anodizing improved the strength of the joints by a factor of about 6 compared with sandblasting. For the anodizing pre-treated joints, melted polymer infiltrated deeply within the nanoporous anodic film, forming a strong polymer-film bond. Joint failure occurred by ductile tearing of... 

We synthesized by electrostatic self-assembly route in basic solution Fe3O4–cysteine/RGO and Fe3O4/RGO–cysteine nanocomposites. In this method, electrostatic interaction was created via negatively charged surface of the reduced graphene oxide and reduced graphene oxide–cysteine sheets and positively charged surface of the Fe3O4 and Fe3O4–Cys nanoparticles in aqueous solution. The structural and magnetic properties of the prepared samples were analyzed by x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, transmission electron microscopy (TEM), and vibrating sample magnetometer (VSM), respectively. The dependences of magnetization as a function of... 

H2O-assisted atmospheric pressure chemical vapor synthesis is a modern economical process for the gas-phase synthesis of TiO2 nanoparticles. In the present work, the influence of synthesis temperatures (100-800 °C) on the phase structure, nanoparticle size, morphology, and agglomeration is investigated by transmission electron microscopy, selected area electron diffraction, X-ray diffraction, thermogravimetry, and differential thermal analysis. Down to 400 °C, crystalline TiO2 nanoparticles are synthesized and at 200 °C amorphous nanoparticles are formed. Therefore, a decrease in minimum synthesis temperature by more than 500 °C is achieved. In addition, the paper investigates the hypothesis... 

In this study, graphene oxide (GO) was synthesized via modified Hummer's method and exploited as an ideal enzyme immobilization support due to its exclusive chemical and structural features. Then, laccase from genetically modified Aspergillus was covalently immobilized onto GO (nanobiocatalyst). Enzymatic characterization of the nanobiocatalyst exhibited promising results: laccase loading of 156.5 mg g−1 and immobilization yield of 64.6% at laccase concentration of 0.9 mg/ mL. Further employment of various structural characterization techniques including Fourier Transform Infrared Spectroscopy (FTIR), X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), Thermo-Gravimetric... 

Polyphosphate reduced graphene oxide on Ni foam (PPO-RGO/NF) is synthesized by varying weight ratios of Na5P3O10 (PO): graphene oxide (GO) with a simple, scalable and low cost method through freeze-drying of the PO-GO/NF followed by thermal treatment of the prepared electrodes. The resulting samples are characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), Brunauer-Emmett-Teller (BET), and raman spectroscopy methods. The results show that the weight ratio of PO:GO, considerably affect the... 

Promising properties of boron nitride nanomaterials such as their chemical, thermal, and mechanical stability have made them suitable materials in a various range of applications. However, their low electrical conductivity and wide bandgap, particularly in the case of boron nitride quantum dots (BNQDs), have given rise to severe limitations. Efforts on bandgap engineering through doping and surface functionalization have gained little success due to their high thermodynamic stability and inertness. Herein, we present a novel approach to functionalize BNQDs by hydroxyl, methyl, and amine functional groups aiming to adjust the electronic structure. The successful exfoliation is demonstrated by... 

In the current study, niosome-encapsulated tobramycin based on Span 60 and Tween 60 was synthesized and its biological efficacies including anti-bacterial, anti-efflux, and anti-biofilm activities were investigated against multidrug resistant (MDR) clinical strains of Pseudomonas aeruginosa. The niosomal formulations were characterized using scanning electron microscopy, transmission electron microscopy, and dynamic light scattering measurement. The encapsulation efficiency was found to be 69.54% ±; 0.67. The prepared niosomal formulations had a high storage stability to 60 days with small changes in size and drug entrapment, which indicates that it is a suitable candidate for pharmaceutical... 

The present article describes the synthesis of a new magnetic polyacrylonitrile-based Pd catalyst involving polyacrylonitrile modified via 2-aminopyridine as an efficient support to immobilize Pd nanoparticles. The simple reusability, easy separation and high stability of this Pd complex make it an excellent candidate to generate a C–O bond via Ph-X activation which is a really important subject in achieving biologically active compounds. It is worth to note access to good and high yields as well as broad substrate scope have resulted from superior reactivity of this catalyst complex. Furthermore, the structure of the magnetic polyacrylonitrile-based heterogeneous catalyst was characterized... 

In this study, butt welds of an advanced high strength dual phase steel were fabricated using friction stir welding at a constant rotational speed of 800 rpm and different transverse speeds of 100, 150 and 200 mm/min. It was observed that sound welds can be obtained at transverse speeds of 100 and 150 mm/min. At transverse speed of 100 mm/min, the entire stir zone processed at temperatures higher than Ac3. By increasing transverse speed to 150 mm/min, temperature in the bottom region of the stir zone lied between Ac1 and Ac3, while the middle and the top regions experienced temperatures higher than Ac3. The lower peak temperature in the bottom region of the stir zone resulted in finer and... 

The excellent photoluminescent properties of Fe3O4-graphene quantum dots (Fe3O4/GQD) nanoparticles prepared at 30 and 90 °C have made them as promising optical probes for imaging. Herein, the cytotoxicity of GQD and Fe3O4/GQD nanoparticles in L929 cells was investigated using MTT [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium Bromide] assay. The cellular apoptosis or necrosis was then evaluated by flow cytometry analysis. The Fe3O4/GQD nanoparticles were characterized by transmission electron microscopy (TEM), Raman spectroscopy (Raman), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence (PL). Characterization results obtained, clearly show that Fe3O4/GQD nanoparticles... 

In the present study, the effects of Sr and Mg were investigated on mechanical and biological properties of 58S bioactive glass (BG). SiO2-P2O5-CaO BG with different contents of Sr and Mg were synthesized via the sol-gel method and immersed in simulated body fluid (SBF) for several days to explore their biocompatibility. Precise analyses of the BG using X-ray powder diffraction, scanning electron microscopy, and transmission electron microscopy showed that the Mg-doped BG containing 8 wt % MgO possessed better biocompatibility. It was also found that mechanical properties of the BG could be improved by increasing the amounts of MgO and SrO. Both 5Sr-BG and 8Mg-BG samples did not exhibit any...