Sharif Digital Repository

Scaling imbibition curves are of great importance in the characterization and simulation of oil production from naturally fractured reservoirs. Different parameters such as matrix porosity and permeability, oil and water viscosities, matrix dimensions, and oil/water interfacial tensions have an effective on the imbibition process. Studies on the scaling imbibition curves along with the consideration of different assumptions have resulted in various scaling equations. In this work, using an artificial neural network (ANN) method, a novel technique is presented for scaling imbibition recovery curves, which can be used for scaling the experimental and field-scale imbibition cases. The... 

In this work, coupled Cahn–Hilliard phase field and Navier–Stokes equations were solved using finite element method to address the effects of micro-fracture and its characterizations on water-oil displacements in a heterogeneous porous medium. Sensitivity studies at a wide range of viscosity ratios (M) and capillary numbers (Ca), and the resultant log Ca–log M stability phase diagram, revealed that in both media, with/without fracture, the three regimes of viscous fingering, capillary fingering and stable displacement similarly occur. However, presence of the fracture caused water channeling phenomenon which resulted in reduction of the number of active fingers and hence the final oil... 

In order to understand the potential role of divalent ions involved in smart water, fluid-fluid and rock-fluid interactions are studied through contact angle and interfacial tension (IFT) measurements. Then, the suitable brines in changing contact angle and IFT are brought into measurement with spontaneous imbibition experiments to evaluate the co-impact of fluid-fluid and rock-fluid interactions. The results show the importance of SO42− ions during smart water injection as removing them from the injection water leads to a sharp drop in ultimate oil recovery. Accordingly, when the concentration of SO42− within the injection water increases four times, 10% ultimate oil recovery is recovered.... 

A large amount of the discovered oil reserves are reserved in carbonate formations, which are mostly naturally fractured oil-wet. Wettability alteration towards more water-wet state reduces the capillary barrier, hence improving the oil recovery efficiency in such reservoirs. In this study, wettability alteration towards favorable wetting state was investigated by combining modified low salinity brine with surfactant during water flooding. The diluted brine was modified by increasing the concentration of Mg2+ and SO4 2−, individually as well as both ions in combination. Different brine formulations were tested experimentally through the observations of contact angle measurements and... 

Condensate and water banking around gas condensate wells result in vital well deliverability issues. Wettability alteration of near wellbore region to gas wetting condition is known to be the most novel and the only permanent method, to improve condensate well productivity. In this work, a water based nanofluid is used to change the wettability of sandstone reservoir rocks from strongly liquid wetting to intermediate gas wetting condition. Static contact angle measurements demonstrated significant increase of liquid phase contact angle as a result of chemical treatment with SurfaPore M nanofluid. The characteristics of SurfaPore M adsorption on sandstone rock are quantified through kinetic... 

Interacting capillary bundle model has been much attended for modeling of imbibition process, however, how the tube morphology controls the front displacement is not well discussed in the available literature, especially when corner flow of wetting phase is considered. Tubes with non-circular cross-sections were used for simulating imbibition process performed on drained bundle of tubes. Different combinations of the interacting tubes with equilateral triangular, square, and circular cross sections were used in the bundle model to explore the role of capillary morphology. The evolution of displacement front, as well as transient water saturation profiles along the model, were obtained for... 

Capillary imbibition is an important recovery mechanism in naturally fractured reservoirs when water-filled fractures surround water-wet matrix blocks. A large amount of studies of imbibition process is simply total or partial immersion of nonwetting phase saturated rock in aqueous wetting phase. However, water advance in fractures during water flooding or water encroachment from an active aquifer introduces time dependent boundary conditions where invariant exposure of rock surface to water is not representative. In this work, a laboratory simulated matrix-fracture system was used to investigate different aspects of imbibition in the presence of fracture fluid flow (namely dynamic... 

As a non-invasive method, photographic imaging techniques offer some interesting potentials for characterization of soil moisture content in unsaturated porous media, enabling mapping at very fine resolutions in both space and time. Although less explored, the wealth of soil moisture data provided by photographic imaging is also appealing for the estimation of unsaturated soil hydraulic parameters through inverse modeling. However, imaging data have some unique characteristics, including high susceptibility to noise, which can negatively affect the parameter estimation process. In this study a sequential data assimilation approach is developed to simultaneously update soil moisture content... 

There are increasing evidences that adjusting the chemistry of the injecting water improves the oil recovery efficiency. However, the underlying mechanisms for this technique which is referred to as "smart waterflood" have not yet been thoroughly understood. It is needed to explore the role of individual ions through set of different tests, to find the right mechanisms behind "smart waterflood". This study is focused on the fluid/solid (carbonate) interactions through systematic wettability measurement. Contact angle measurements accompanied by spontaneous imbibition tests were employed to determine the role of individual monovalent and divalent ions in wettability alteration process by... 

Spontaneous imbibition, defined as the displacement of nonwetting phase by wetting phase in porous media by action of capillary forces, is important in many applications within earth sciences and in particular in naturally fractured oil and gas reservoirs. Hence, it is critical to investigate the various aspects of this process to correctly model the fractured reservoir behavior. In this study, twenty four experiments were conducted to study the effect of rock properties, lithology of porous medium, brine viscosity and boundary conditions on displacement rate and final recovery by cocurrent spontaneous imbibition (COCSI) in brine-oil systems. The results can be extended to brine-gas systems,... 

In this work, phase-field method is used to develop a numerical model to simulate two-phase flow through a heterogeneous fractured porous medium. Various sensitivity analyses were performed to assess the impact of wettability, fracture aperture, interfacial tension, and water injection velocity on the displacement process. It was observed that the water mass imbibed into the matrix block varies linearly with time before the water front meets the outlet, known as “filling fracture” regime, which is captured for the first time in a numerical study. It is revealed that increasing the fracture aperture reduces water breakthrough time and oil recovery. © 2020 Taylor & Francis Group, LLC  

Spontaneous imbibition is well-known to be one of the most effective processes of oil recovery in fractured reservoirs. However, the detailed pore-scale mechanisms of the counter-current imbibition process and the effects of different fluid/rock parameters on this phenomenon have not yet been deeply addressed. Thiswork presents the results of a newpore-level numerical study of counter-current spontaneous imbibition, using coupled Cahn-Hilliard phase field and Navier-Stokes equations, solved by a finite element method. A 2D fractured medium was constructed consisting of a nonhomogeneous porous matrix, in which the grains were represented by an equilateral triangular array of circles with... 

Spontaneous imbibition of water into the matrix is the most important mechanism for oil recovery in water wet fractured porous media. If the water is in contact with matrix and it is not flowing, the process is called static imbibition. The effect of rock and fluid properties, and boundary conditions on static imbibition are studied and formulated for scaling of the laboratory data to the reservoir scale. In reality, there is a continuous flow in a fracture; incorporating the effect of fracture flow into the scaling formulations is an unresolved issue in the modeling of the capillary imbibition recovery from the matrix. In this article, a new mathematical equation is developed to scale... 

Capillary pressure is one of the most important parameters for reservoir engineering studies. Although different experimental methods are devised to measure capillary pressure, these methods do not represent the physics of fluid flow, which happens at reservoir conditions. Thus, it is attempted to extract the capillary pressure from spontaneous imbibition data, the common mechanism of oil production in water wet porous media. In this work, a new approach is developed to obtain the imbibition capillary pressure curve by using spontaneous water imbibition data in oil-water-rock systems. Comparison of calculated imbibition capillary pressure curves by the new approach with experimental values... 

An index for characterizing wettability of reservoir rocks is presented using slope analysis of spontaneous imbibition recovery data. The slope analysis is performed using the known exact analytical solution to infinite acting period of counter-current spontaneous imbibition. The proposed theoretically based wettability index offers some advantages over existing methods: (1) it is a better measure of the spontaneous imbibition potential of rock (because the magnitude is directly proportional to the imbibition rate); (2) there is no need for forced displacement data; (3) there is no need for waiting until the spontaneous imbibition process ceases completely; and (4) the data needed to run the... 

Spontaneous imbibition, the capillary-driven process of displacing the nonwetting phase by the wetting phase in porous media, is of great importance in oil/gas recovery from matrix blocks of fractured reservoirs. The question of how properly scaling up the recovery by counter-current spontaneous imbibition has been the subject of extensive research over decades, and numerous scaling equations have been proposed. As a convention, the scaling equations are usually defined analytically by relating the early time squared recovery to squared pore volume. We show this convention does not apply to common scaling practices and, if used, causes nontrivial scatter in the scaling plots. We explain that... 

Spontaneous imbibition of water into the matrix blocks because of capillary forces is an important recovery mechanism for oil recovery from naturally fractured reservoirs. In modeling this process, it has been assumed classically that local equilibrium is reached and, therefore, capillary pressure and relative permeability functions are only a function of water saturation, resulting in the appearance of the self-similarity condition. In some works published in the last 2 decades, it has, however, been claimed that local equilibrium is not reached in porous media, and therefore, opposite the classical local-equilibrium/self-similar approach, non-equilibrium effects should be taken into... 

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors... 

In strong water drive gas reservoirs (WDGRs), the water encroachment in the gas zone has adverse effects on the gas mobility and causes considerable volume of gas to be trapped behind water front; therefore estimation of residual gas saturation after water influx is an important parameter in estimation of gas reservoirs with strong aquifer support. It is difficult to achieve a thorough and exact understanding of water drive gas reservoirs. It depends on several parameters of petrophysical and operational features. In majority of the previous studies about residual gas saturation, the correlations were depended on petrophysical properties such as porosity, permeability, and initial gas... 

This paper develops a two dimensional Green element simulator based on a "compatibility-equation" algorithm for simulation of counter-current spontaneous imbibition (COUCSI) process. The Green element method is a novel computational approach based on the boundary integral theory, which is regarded as a hybrid combination of both boundary and finite element methods. The superiority of the Green element method in modeling of two phase water/oil flow is at the core of this paper. The developed simulator within the context of this proposition is explored to predict the oil recovery from a one dimensional single matrix block. The results are then compared with the experimental data, and they...