Sharif Digital Repository

In today's world, control and navigation of autonomous underwater vehicles (AUVs) are quite challenging issues. In these fields, obtaining an identified dynamic model of AUV is a vital part. In this paper, a method for parameter estimation of an AUV planar model is proposed, which uses augmented state space technique and Square Root Transformed Unscented Kalman Filter (SR-TUKF) as an estimator. Furthermore, by modeling, misalignment between Inertial Measurement Unit (IMU) and Doppler Velocity Log (DVL) is estimated, simultaneously. Parameter identification is conducted using data of an AUV, equipped with Gyroscope, DVL and Encoder for measuring control inputs, in a planar maneuver. According... 

Object-oriented modeling methodology is used for encapsulating different methods and attributes of data reconciliation (DR) in classes. Classes which are defined for DR, cover steady-state, dynamic, linear and nonlinear DR problems. Two main classes are Constraints and DR and defined for manipulating constraints and general DR problem. The remaining classes are derived from these two classes. A class namely DDRMethod is developed for encapsulating all common attributes and methods needed for any DDR method. Developed DR software and the method of performing dynamic DR are discussed in this paper. Two illustrative examples of Extended Kalman Filtering and artificial neural networks are used... 

This paper presents an algorithm for synchronizing two different chaotic systems, using a combination of the extended Kalman filter and the sliding mode controller. It is assumed that the drive chaotic system has a random excitation with a stochastically chaotic behavior. Two different cases are considered in this study. At first it is assumed that all state variables of the drive system are available, i.e. complete state measurement, and a sliding mode controller is designed for synchronization. For the second case, it is assumed that the output of the drive system does not contain the whole state variables of the drive system, and it is also affected by some random noise. By combination of... 

Laser Powder Deposition technique is an advanced production method with many applications. Despite this fact, reliable and accurate control schemes have not yet fully developed for this method. This article presents method for in time identification of the process for modeling and adaptation of proper control strategy. ARMAX structure is chosen for system model. Recursive least square method and Kalman Filter methods are adopted for system identification, and their performance are compared. Experimental data was used for system identification, and proper filtering schemes are devised here for noise elimination and increased estimation results. It was concluded that although both methods... 

This paper concerns non-linear state estimation in a batch polymerization reactor where suspension polymerization of methyl methacrylate takes place. A kinetic model proposed in the literature is selected and its validity has been verified through an experimental set-up. Based on this model monomer conversion and average molecular weights of the polymer are estimated using only one output measurement (reactor temperature). The performance of the estimator, which has the structure of an extended Kalman filter, is examined through simulation and experimental studies in the presence of different levels of parameter uncertainties. The effects of adding 'fictitious noise' and parameter state' to... 

Battery energy systems are playing significant roles in smart homes, e.g., absorbing the uncertainty of solar energy from root-top photovoltaic, supplying energy during a power outage, and responding to dynamic electricity prices. For the safe and economic operation of batteries, an optimal battery-management system (BMS) is required. One of the most important features of a BMS is state-of-charge (SoC) estimation. This article presents a robust central-difference Kalman filter (CDKF) method for the SoC estimation of on-site lithium-ion batteries in smart homes. The state-space equations of the battery are derived based on the equivalent circuit model. The battery model includes two RC... 

Nowadays, Autonomous Underwater Vehicles (AUV) are used in environmental studies, ocean floor mapping, and measuring water properties. Navigation of these vehicles is one of the most challenging issues due to the unavailability of global positioning system (GPS) signal underwater. Inertial navigation is a method commonly used for underwater navigation. If a low-cost Inertial Measurement Unit (IMU) is used, navigation quality will decline rapidly due to sensor inherent error. Although using a Doppler Velocity Log (DVL) speedometer sensor helps limit this error to some extent, it does not yield acceptable accuracy in low-cost IMUs. Filtering the gyro based on the AUV rotational dynamics model... 

Ensemble Kalman filter, EnKF, as a Monte Carlo sequential data assimilation method has emerged promisingly for subsurface media characterization during past decade. Due to high computational cost of large ensemble size, EnKF is limited to small ensemble set in practice. This results in appearance of spurious correlation in covariance structure leading to incorrect or probable divergence of updated realizations. In this paper, a universal/adaptive thresholding method is presented to remove and/or mitigate spurious correlation problem in the forecast covariance matrix. This method is, then, extended to regularize Kalman gain directly. Four different thresholding functions have been considered... 

In this paper, LQG/LTR controller is designed for attitude control of the geostationary satellite at nominal mode. Usage actuator is the reaction wheel and control torque is determined by the LQR regulator. LQR controller signal has good performance, if all states are considered in feedback, but does not include model and sensors noises. Usage sensors are sun and earth sensors and EKF is used for estimation of noisy states. Then, LQG and LQG/LTR controllers are designed based on the estimated states, and are compared with LQR controller. The results show that robustness and performance of LQG/LTR are better than LQG and its control overshoot is smaller than LQR. The term that is provided in... 

In this paper an efficient filtering procedure based on Extended Kalman Filter (EKF) has been proposed. The method is based on a modified nonlinear dynamic model, previously introduced for the generation of synthetic ECG signals. The proposed method considers the angular velocity of ECG signal, as one of the states of an EKF. We have considered two cases for observation equations, in one case we have assumed a corresponding observation to angular velocity state and in the other case, we have not assumed any observations for it. Quantitative evaluation of the proposed algorithm on the MIT-BIH Normal Sinus Rhythm Database (NSRDB) shows that an average SNR improvement of 8 dB is achieved for an... 

The fusion of the optical and inertial tracking systems seems an attractive solution to solve the shadowing problem of the optical tracking systems, and remove the time integration troubles of the inertial sensors. We developed a fusion algorithm for this purpose, based on the Kalman filter, and examined its efficacy to improve the position and orientation data, obtained by each individual system. Experimental results indicated that the proposed fusion algorithm could effectively estimate the 2 seconds missing data of the optical tracker  

In this paper, a Kalman filter technique which is operated in time is introduced for noise reduction on CT set of projections to reconstruct medical images. The experiments were done on medical image of kidneys and the simulated projections are captured by CT scanner. Evaluation results indicated that as the number of projections increase in the collected ray sums corrupted by noise the quality of reconstructed image becomes better in terms of contrast and transparency. However, for the comparison issue, the same conditions are applied for reconstruction of medical image in frequency domain using filter back projection technique. It observes that filter back projection technique does not... 

The Ensemble Kalman Filter (EnKF) is a Monte Carlo based method to assimilate the measurement data sequentially in time. Although, EnKF has some advantages over the other Kalman based methods to deal with non-linear and/or high dimensional reservoir models, it also suffers from deficiency in estimation of non-Gaussian parameters. In this work, we propose a re-parameterization method to handle non-Gaussian parameters via Ensemble Kalman Filter framework. For this purpose, concept of cumulative distribution function transformation has been used. In addition, the statistics of prior information have been aggregated in the state vector in order to capture the prior uncertainties of non-Gaussian... 

In this paper, a framework for distributed and decentralized state estimation in high-pressure and long-distance gas transmission networks (GTNs) is proposed. The non-isothermal model of the plant including mass, momentum and energy balance equations are used to simulate the dynamic behavior. Due to several disadvantages of implementing a centralized Kalman filter for large-scale systems, the continuous/discrete form of extended Kalman filter for distributed and decentralized estimation (DDE) has been extended for these systems. Accordingly, the global model is decomposed into several subsystems, called local models. Some heuristic rules are suggested for system decomposition in gas pipeline...