Sharif Digital Repository

This study aims to investigate the micromixing performance of three basic types of spatial shaped micromixers. New configurations of T, Y, and oriented Y-spatial mixers were designed with change in the angles of the confluence and the outlet channel to achieve the efficient micromixing. These micromixers offer advantages that are not attainable with the typical types of these mixers. Experimental tests were carried out in the laminar flow regime and the mixing efficiency was evaluated using Villermaux/Dushman test reaction. The geometries of the channels were cylindrical with the length of 30 mm and the diameter of 800 μm. The experimental results show that the angle of outlet channel has a... 

The Lab On a CD (LOCD), also known as Centrifugal Microfluidics, has evolved into a sophisticated platform for performing biomedical assays due to its marvelous miniaturization and accurate simulation of biological reactions. Among the numerous applications of the LOCD is fluid mixing. In this paper a centrifugal, serpentine micromixer is simulated and reformed toward better mixing performance. The micromixer was chosen to be curved as a curved design was found to be thrice as functional and compact as a rectilinear design, mixing-wise. The two angular velocity and opening radius parameters were originally hypothesized to affect mixing performance. Effect of angular velocity was studied over... 

In most of the microfluidic applications, it is necessary to have a mixed fluid from the beginning, but in microchannels, due to facing with low Reynolds flows, the fluids flow in the channel by the laminar regimes. Hence the mixing process is a challenging problem and researchers are trying to present fast and reliable micromixers. In this paper, using Ionic Polymer-Metal Composites (IPMCs), an active micromixer has been designed. To investigate the appropriateness of IPMC, using experimental and simulation tests, we show that the IPMC actuator is a potential candidate as an active element of microfluidic micromixers  

Balancing a rotating machine is a vital step towards ensuring it will operate reliably and safely. To achieve this condition monitoring is an important aspect for early faulty detection and it can also result in the improvement of the operational continuity and equipment safety. Imbalance itself, is a common problem in rotating machinery and it can lead to poor or even dangerous vibration levels. And, for example, it is also well known that misalignment can lead to bearing defects. So, in order to overcome these problems many balancing techniques have been developed that are largely based on measured vibration data using accelerometers attached to the faulty device. The three-point method is... 

A sixteen node cylindrical super element is presented for evaluating the free vibration characteristics of a rotating laminated cylinder with conventional boundary conditions. It is shown that the natural frequencies are affected considerably when the centrifugal force is also taken into account. The vibration frequencies of rotating finite cylinder, obtained by conventional finite element are used to evaluate the accuracy of this approach. The special case of a stationary cylinder with zero spinning velocity is also considered as a check on this method. Results indicate only few number of cylindrical super elements are capable of predicting the natural frequency of the rotating cylinder... 

In this paper, a Static Synchronous Series Compensator (SSSC) is used to avoid torsional mode instability in a series compensated transmission system. The power system used in this study is the IEEE first benchmark model for Sub-Synchronous Resonance (SSR) analysis. Simulation results in time domain using PSCAD/EMTDC presented and discussed. ©2006 IEEE  

At SCN 2018, Fiore and Pagnin proposed a generic compiler (called “Matrioska”) allowing to transform sufficiently expressive single-key homomorphic signatures (SKHSs) into multi-key homomorphic signatures (MKHSs) under falsifiable assumptions in the standard model. Matrioska is designed for homomorphic signatures that support programs represented as circuits. The MKHS schemes obtained through Matrioska support the evaluation and verification of arbitrary circuits over data signed from multiple users, but they require the underlying SKHS scheme to work with circuits whose size is exponential in the number of users, and thus can only support a constant number of users. In this work, we propose... 

The vibration of a simply supported beam with rotary springs at either ends is studied. The governing equations of motion are investigated considering the nonlinear effect of stretching. These equations are made non-dimensional and then solved to first order approximation using the two methods of the multiple scales and the mode summation. The first five natural frequencies of the beam for few pairs of the boundary condition parameters are evaluated. A multilayer feed-forward back-propagation artificial neural network is trained using these natural frequencies. The artificial neural network used in this study shows high degree of accuracy for the natural frequency of the beam with general... 

The aim of this experimental work is to study the effect of grooved surfaces in the entrance region of annular flows on local heat transfer. The outer stationary cylinder is grooved and the inner rotating cylinder is smooth. This configuration is applicable in industrial applications such as rotating heat pipes for cooling of superconducting machines or motors rotor, electrical generators where heat generates in the grooves containing wires, transient heating of axial compressor rotor drams, combustion chamber in turbojets, air-cooled axial-flux permanent-magnet machines. The experimental tests were performed based on aspect ratio of the groove, effective Reynolds number and Taylor number.... 

A traveling mass due to its mass inertia has significant effects on the dynamic response of the structures. According to recent developments in structural materials and constructional technologies, the structures are likely to be affected by sudden changes of masses and substructure elements, in which the inertia effect of a moving mass is not negligible. The transverse inertia effects have been a topic of interest in bridge dynamics, design of railway tracks, guide way systems and other engineering applications such as modern high-speed precision machinery process. In this study an analytical-numerical method is presented which can be used to determine the dynamic response of beams carrying... 

In this paper, we develop the machinery of real interference alignment. This machinery is extremely powerful in achieving the sum degrees of freedom (DoF) of single antenna systems. The scheme of real interference alignment is based on designing single-layer and multilayer constellations used for modulating information messages at the transmitters. We show that constellations can be aligned in a similar fashion as that of vectors in multiple antenna systems and space can be broken up into fractional dimensions. The performance analysis of the signaling scheme makes use of a recent result in the field of Diophantine approximation, which states that the convergence part of the... 

Functional quality in the mechanical products is governed mainly by the degree of satisfaction of the design requirements, which itself depends on the variations in the effective variables. The functional parameters cannot be easily measured in mass production, and thus, are not usually considered as a direct inspection objective. Process capability indices are useful tools for evaluating the ability of a process to produce the dependent variables of a product that meet certain specifications. In this paper, the conventional process capability concept is extended to develop a computational tool for analysis of the functional quality of a mechanical product. Through defining new proper... 

A new ultra wideband (UWB) pulse generator covering a-10 dB bandwidth of 2.4-4.6 GHz with a tunable center frequency of 5-5.6 GHz to mitigate coexistence issues of impulse radio UWB (IR-UWB) systems and IEEE802.11.a WLAN or other narrowband (NB) systems in 90 nm-CMOS technology is proposed. The UWB pulse is generated based on frequency up-conversion of the first derivative of the Gaussian pulse, which creates an adjustable null in the frequency spectrum. Simulation results show that employing the proposed pulse generator mitigates the mutual interference between UWB and WLAN systems, significantly. The proposed transmitter consists of a low frequency signal generator, an LC oscillator and a... 

Multi-site photoplethysmography is an optoelectronic technique that measures changes in blood volume associated with cardiac contraction. Photoplethysmogram (PPG) recording enables researchers to study the vascular and hemodynamic properties of human subjects. Currently, there is no commercial system available in the market to perform multi-channel PPG recording. The measurements can be obtained from fingertips, ear lobes and toes due to their low absorption and high degree of vasculature. The main objective of this project is to develop a suitable data compression algorithm for two-channel simultaneous high resolution wireless PPG recording system. MATLAB software was used during the... 

In this work, we study the gas mixing behavior in a micro T-mixer using the direct simulation Monte Carlo (DSMC) method. The gas mixing process is monitored through a T-mixer, which is fed by two different CO and N2 gases; flowing into the T-mixer through the upper and lower inlets. We investigate the effects of axial and lateral wall temperature gradients on the mixing evolution at different rarefaction levels. The achieved results show that any temperature difference between the channel walls would result in an increase in mixing length for the chosen wall temperature gradient ranges and the studies pressure cases. Our observations show that a positive temperature gradient toward the... 

Two major structures for rotor core of superconducting synchronous machine are air-cored and magnetic-cored structures. Magnetic-cored structure can be divided into two categories including salient and non-salient magnetic core. In this paper, three different structures of superconducting synchronous machine comprising air-cored, non-salient magnetic-cored and salient magnetic-cored, have been studied and compared considering required superconducting wire and machine weight. Required superconducting wire determines the capital cost and the weight of the machine determines the running cost in the case of portable applications such as ships and aircrafts  

This paper presents a method to maximize the output power of a DFIG wind turbine. In this method, an optimization technique based on mathematical analysis has been used. The modeling of DFIG is performed using MATLAB. To evaluate the maximum output power of a DFIG, detailed expressions for output power and losses are derived as functions of generator slip, the magnitude and phase angle of rotor excitation voltage in various wind velocities. The outcomes of this method demonstrate that maximum output power of a DFIG wind turbine do not happen in the maximum input power (the mechanical power of wind turbine)  

For distribution grids connected wind power generation, voltage quality is an important issue for the system planning purpose. The operation of wind turbines in the distribution networks may affect the voltage quality offered to the consumers. One of the most important considerations is the effect on the voltage profile, i.e. the induced slow voltage variations, which are the subject of this paper. The wind turbines can be operated in two modes: constant-speed and variable-speed. Each one of these cases has different impact on steady state voltage of distribution grids. For evaluation of these impacts, we have simulated SCIG generator that works in constant-speed operation and DFIG generator... 

A new low-power current reuse topology is proposed for the GPS receiver's RF front-end that combines the higher conversion gain and suppressed noise figure characteristics of cascade structures with the low power consumption of stacked architectures. The presented circuit, called 1.5-stage LMV cell, consists of LNA, Mixer and VCO (LMV) in such a formation that boosts LNA gain and suppresses mixer's noise figure by cascading the two stages while reusing their currents in the two stacked quadrature VCOs and placing the mixer's upper tree switches at the vicinity of on-off regions. The circuit is designed and its layout is generated in TSMC 0.18μm CMOS technology. Post-layout simulations using... 

In this study, the steady-state operation of the brushless doubly-fed machine (BDFM) in various modes is physically elaborated and the active power flow and torque analysis are presented for each operating mode alongside confirmatory experimental results on a 4/8 pole D160 size machine. The machine behaviour in asynchronous operating modes is described similar to the conventional induction machines with corresponding pole numbers. Moreover, its performance in synchronous mode is shown to be similar to synchronous machines. On the basis of the above, the BDFM performance is further analysed under two possible fault conditions: first, a controller or converter fault leading to loss of...