Sharif Digital Repository

This article deals with the adsorption performances of the unmodified nanodiamond (ND) and thermally oxidized nanodiamond (Ox-ND) for the removal of different heavy metal ions such as Fe (III), Cu (II), Cr (VI), and Cd (II) from wastewater. The adsorption capacities of the ions onto adsorbents are higher and follow the order: Ox-ND-3 > Ox-ND-1.5 > ND, which is consistent with their surface areas, zeta potentials, and the presence of carboxyl groups, suggesting that electrostatic attractions between the positive metal ions and the negatively charged adsorbents are the predominant adsorption mechanisms. Adsorption capacities of these adsorbents were found to be 26.8, 31.3, and 45.7 mg/g for Fe... 

In this contribution, NiO-MgO-SiO2 catalyst was prepared and calcined at different temperatures of 500, 600, 700 and 800 °C. The resulting samples were characterized by BET-BJH, XRD, TPX, CO-chemisorption, EDS and SEM analyses. These were employed toward syngas production via propane dry reforming. The increment in the calcination temperature from 500 to 800 °C decreased the basicity of the catalysts. In addition, the active surface area and Ni dispersion were gradually declined by increasing the calcination temperature from 600 to 700 °C due to active metal sintering during the activation process. The calcined sample at 600 °C displayed the highest propane and CO2 conversions of 93% and 78%... 

In this study, an attempt has been made to fabricate Cu-SiC nanocomposites by flake powder metallurgy and high-pressure torsion processing techniques at room temperature. Pure Cu and a mixture of Cu and nano-sized SiC powders were mechanically milled separately for 3 h and then green compacts were prepared by uniaxial pressing under 1 GPa pressure. The green compacts experienced 6-turn high-pressure torsion under a pressure of 6 GPa to prepare bulk Cu and Cu-SiC samples. The microstructures of the consolidated samples were characterized using an X-ray diffractometer and a high resolution scanning/transmission electron microscope, and the mechanical properties were evaluated by microhardness,... 

Introducing suitable electrode materials and electrolytes for supercapacitors and next-generation batteries should be considered for the industrial application of these devices. Among the proposed materials for them, transition metal chalcogenides (TMCs), are attractive and efficient options due to their unique properties such as appropriate layered structure, good oxidation state of transition metals, high thermal and mechanical stabilities, etc. However, applying other layered materials with high electrical conductivity e.g. carbon-based materials can lead to producing remarkable results for the mentioned applications. However, an interesting point is how making TMCs composite with... 

Several pieces of research have been done on transition metal nanoparticles and their nanocomplexes as research on their physical and chemical properties and their relationship to biological features are of great importance. Among all their biological properties, the antibacterial and antimicrobial are especially important due to their high use for human needs. In this article, we will discuss the different synthesis and modification methods of silver (Ag) and gold (Au) nanoparticles and their physicochemical properties. We will also review some state-of-art studies and find the best relationship between the nanoparticles’ physicochemical properties and potential antimicrobial activity. The... 

Photocatalytic wastewater treatment and concurrent energy production or metal ions conversion to less harmful products have great potential to address both environmental and energy challenging issues, two of the most significant problems facing humankind. Many efforts have been devoted for achieving enhanced photocatalytic activity as well as optimizing reaction conditions and materials design. In this context, various strategies were applied to develop efficient dual-functional photocatalysts for environmental purification and simultaneous energy production. Concurrent photocatalytic degradation of organic pollutants and Cr(VI) reduction to less toxic Cr(III) improved the rate of both... 

In this study, a pulsed Nd:YAG laser welding method is implemented to join Ti-G2 (1 mm thick) to AA3105-O (0.5 mm thick) via a ring of spots filled with AlScZr alloy (0.15 mm thick). The filler material improved the weld’s microstructure and mechanical properties by reducing the undesirable intermetallic compounds (IMCs) such as TiAl2 and TiAl3 in the aluminium re-solidified zone near the titanium/aluminium interface. The joints having AlScZr filler were mostly failed at Al heat affected zone (HAZ) during the tensile shear test. The addition of zirconium to binary Al–Sc system formed a substitutional solid-solution in which 50 wt% Zr+10 wt% Ti replaced Al3(Sc,Zr,Ti). Scandium had a... 

Drying is a common practice for delaying deterioration, preserving quality, and easier prolonged storage of agricultural products. According to the climatic and geographical conditions of Arsanjan County, Fars, Iran. So far, many studies have been conducted on the design and use of various barriers on absorber plates with the aim of increasing heat exchange and subsequently increasing the efficiency of air heaters and solar dryers. However, the effect of using the metal of the sewing machine bobbin on the performance of these dryers has not been studied yet. Therefore, in this study, for the first time, this metal and also pipes containing PCM (phase change material) were used as a barrier... 

Zeolitic imidazole frameworks (ZIFs) provide an exciting platform to design and fabricate non-precious-metal carbon-based catalysts for oxygen reduction/evolution reaction (ORR/OER). Herein, we elaborately design a facile enzyme-assisted synthetic strategy that enables to tailor the ZIFs precursors into structural stable decussation shape, which derived Co nanoislands grafted on decussate N-doped carbon nanoleaves (D-Co@NC) can well retain the interpenetrating nanostructure. Benefiting from the combined advantages of compositions and interpenetrating nanostructures, D-Co@NC possesses 5.2 times higher exposed electrochemical active area than the conventional dodecahedral one, thus endowing... 

This paper presents a new symmetric slew rate enhancement (SRE) circuit suitable for operational transconductance amplifiers (OTAs). The proposed SRE circuit is composed of two auxiliary circuits which are automatically activated during fast signal transitions (slewing) by comparing the input and output signals. The auxiliary circuits pump required current in/out the load capacitance. In this way, the slew rate of the amplifier is significantly improved without any extra static power dissipation. The proposed technique can be applied to a variety of operational amplifiers. However, incorporating the proposed SRE circuit into a folded-cascode amplifier (FCA) results in 7× slew rate... 

L-tryptophan functionalized AgNPs were successfully fabricated using a one-pot synthesis method and assessed as a colorimetric probe for rapid and accurate determination of Mg2+ ions. The developed sensor showed a selective response towards Mg2+ with no interference from Ca2+ in the wide concentration range of 1–200 µM. The sensor's response was optimized in the pH range of 9–10, which can be attributed to the protonation of amine groups and their interaction with Mg2+ ions. The stability and selectivity of the sensor were examined in different salt (NaCl) and other metal ions, respectively. The L-tryptophan-AgNPs sensor detected Mg2+ with the limit of detection of 3 µM, which is way lower... 

Formation of unstable solid electrolyte interphase (SEI) layers lacking of thermal stability in non-aqueous electrolytes of rechargeable batteries is the main bottleneck for their long-life cycling, especially at elevated temperatures. Inclusion of a small dose of functional electrolyte additives into the batteries' electrolyte can be highly beneficial to surmount this issue. Of these additives, vinylene carbonate (VC) has drawn particular attention thanks to its high ability to build protective layers at anodes showing good integrity and outstanding thermal stability. In addition to its primary roles in present-day lithium-ion batteries (LIBs), VC additive has also been examined in other... 

Cancer is a deadly disease that has long plagued humans and has become more prevalent in recent years. The common treatment modalities for this disease have always faced many problems and complications, and this has led to the discovery of strategies for cancer diagnosis and treatment. The use of magnetic nanoparticles in the past two decades has had a significant impact on this. One of the objectives of the present study is to introduce the special properties of these nanoparticles and how they are structured to load and transport drugs to tumors. In this study, iron oxide (Fe3O4) nanoparticles with 6 nm sizes were coated with hyperbranched polyglycerol (HPG) and folic acid (FA). The... 

An economical epichlorohydrin cross-linked chitosan @ magnetic Fe3O4/activated carbon nanocomposite, CH-EP@Fe3O4/AC, was successfully synthesized and used as a suitable adsorbent material for removal of a triphenylmethane cationic dye, Malachite green (MG), an anionic dye, Reactive red 120 (RR120), and Mercury ions (Hg2+) from aqueous solution. The prepared adsorbent has been characterized with Fourier transform infrared spectroscopy, X-ray diffraction, Scanning electron microscopy, Thermogravimetric analysis, Brunauer–Emmett–Teller analysis as well as Vibrating sample magnetometer. According to the result of Brunauer–Emmett–Teller isotherm, the prepared adsorbent has a specific surface area... 

Metal-organic frameworks (MOFs), known as highly ordered crystalline hybrid structures, are the products of coordination polymerization of transition metals and organic ligands. MOFs are best known for their extensive specific surface area, hierarchically porous and tailorable 1D, 2D, or 3D micro-and nanostructure, and acceptable biocompatibility. Because of the multiplicity of metallic and organic units used in MOFs synthesis, tailor-made MOFs can be synthesized to be served as building blocks of advanced biological materials and systems. Recently, synthesis of green MOFs has received much more attention for nanobiomedicine usage. We review herein synthesis and biomedical application of... 

Developing chemical sensors with pronounced sensitivity towards lanthanides is a very important task related to the analytical control of industrial processes in nuclear industry. Various diamides of organic acids were shown to be very effective for such sensing applications when employed as ligands in plasticized polymeric membranes of potentiometric sensors. The chemical structures of some of these ligands (diamides of diglycolic acid) are very similar to those suggested in 80’s as Ca(II) ionophores that were later commercialized. We have hypothesized that commercial ionophores ETH 129 (N,N,N′,N′-tetra[cyclohexyl] diglycolic acid diamide) and ETH 5234... 

Mobile phones are known as the most widely used electronic instruments, and an enormous number of discarded mobile phones are generated. The present work used a pure culture of Penicillium simplicissimum in a bubble column bioreactor to extract Cu and Ni from mobile phone printed circuit boards (MPPCBs) waste. Molasses was used as an efficient carbon source to enhance bioleaching efficiency and increase the cost benefits. The adaptation phase was done at Erlenmeyer flasks to reach 40 g/L of MPPCBs powder. The most significant parameters, including the mass of MPPCBs powder, aeration, molasses concentration, and their interaction, were optimized in order to leach the maximum possible Cu and... 

Background: Integrated sewage sludge handling and heavy metal management are important issues that scientists are working to solve today. Methods: Hydrothermal carbonization of dewatered digested sewage sludge (DDSS) under various conditions is carried out in this work, followed by alkali activation. The response surface methodology is used to investigate the operating process conditions and optimize them in order to produce hydrochar with the highest modified adsorption capacity (yield and Pb2+ adsorption). Significant Findings: The ideal conditions are 182.4°C, 4.9 hours, 5.025 (w/w) water/DDSS ratio, and 3.5 (w/w) ZnCl2/DDSS ratio. In addition, the Langmuir isotherm (qmax =109.3 mg/g) and... 

Metal-organic frameworks (MOFs) have recently achieved much attention to eliminating toxic pollutants because of their attractive attributes, including large specific surface area, ultra-high porosity, abundant active adsorption sites, tunable surface chemistry, well-controlled pore size distribution, and strong host–guest interactions. Among the many developed MOFs, the Zr-based MOFs, particularly the UiO-66 family, are considered extremely attractive for wastewater treatment applications. The fascinating properties of UiO-66 such as high thermal stability, superior chemical resistance towards several solvents, including benzene, acetone, different alcohols, dimethylformamide, acidic and... 

The present work is expressed to interpret the hydrodynamic parameters of rotation extraction columns in the reactive and non-reactive systems. The solvent extraction technique has been utilized for optimizing the transportation of molybdenum ions to the organic phase in two agitated columns (ORC and Kühni columns). Dispersed phase volume fraction, average droplet diameter, slip velocity, size distribution, and ions permeability of the aqueous phase have been investigated in terms of changing the operational variables including the agitation rate, flow rate of the inlet dispersed and continuous phases, column geometry, and reaction conditions. By considering the reactive and non-reactive...