Sharif Digital Repository

In this paper, novel zeolitic imidazolate framework-8 (ZIF-8) functionalized with Ag (Ag@ZIF-8) nanoparticles were synthesized through a green, facile and environmental-friendly process for wound dressing applications. X-ray diffraction revealed that the ZIF-8 and Ag@ZIF-8 were successfully synthesized by green solvents at ambient temperature. Field-emission scanning electron microscopy indicated a homogeneous porous blend of ∼30 nm chitosan/bacterial cellulose (CS/BC) nanofibers embedded with ∼80–110 nm nanoparticles of the ZIF-8 and Ag@ZIF-8. Transmission electron microscopy revealed the Ag@ZIF-8 nanostructures consist of ZIF-8 cores that are covered by 5–20 nm Ag nanoparticles. MTT assay... 

Eight eco-friendly, and magnetically-separable heterogeneous photocatalysts including five Au nanoparticles (NPs) modified magnetic TiO2@Fe3O4 NPs and three Ag-Au bi-plasmonic NPs-decorated TiO2@Fe3O4 NPs with enhanced photocatalytic performance under visible light were synthesized and used for photodegradation of methyl orange (MO) as a model pollutant in textile wastewater samples. The photocatalytic activity was assessed using two radiation sources namely, an intense linear 532-nm laser and a continuous solar-simulated xenon lamp. Compared to the TiO2 alone, the prepared photocatalysts revealed efficient photocatalytic activity in visible region due to the presence of two localized... 

Magnetic nanofiber cellulose (NFC) was selected as a biopolymer surface for the reaction with ferric metformin and a novel nanocatalyst was prepared. This green heterogeneous organometallic catalyst was analyzed by physiochemical techniques. The new metformin drug complex supported on magnetic NFC was used as a powerful and efficient catalyst for the synthesis of functionalized 4H-pyrans derivatives. The antimicrobial activity of the products showed excellent activity against all the bacterial and fungal strains (especially compounds 7q and 6r). © 2022 Taylor & Francis Group, LLC  

Introduction: The application of doxorubicin (DOX) in cancer therapy has been limited due to its drug resistance and poor internalization. Graphene oxide (GO) nanostructures have the capacity for DOX delivery while promoting its cytotoxicity in cancer. Areas covered: The favorable characteristics of GO nanocomposites, preparation method, and application in cancer therapy are described. Then, DOX resistance in cancer, GO-mediated photothermal therapy, and DOX delivery for cancer suppression are described. Preparation of stimuli-responsive GO nanocomposites, surface functionalization, hybrid nanoparticles, and theranostic applications are emphasized in DOX chemotherapy. Expert opinion: GO... 

ABSTRACTs: The need for fully dense material with well-engineered microstructures has led to the promising emergence of innovative sintering technologies among which the Spark Plasma Sintering (SPS) is one of the most favorite. Unlike the conventional sintering processes, SPS takes advantage of a current flow passing through the sintering die and metallic powders by which fast densification with minimal grain growth and enhanced physicomechanical properties can be obtained. Albeit there is a growing interest in the exploitation of SPS in producing sufficiently consolidated metallic parts, no analytical review has been released over the effects of SPS parameters on the densification behavior,... 

Given the growing need for renewable energy and related technologies, researches have shifted to develop low-cost, stable, high-efficiency electrocatalysts in clean energy generation reactions such as water electrolysis. In the present paper, a three-dimensional Fe2TiO5/nitrogen-doped graphene (3D FTO/NG) nanocomposite is prepared using a simple, cheap and fast method, called chemical bath deposition (CBD). Structural and physical characterizations of the prepared electrocatalysts are performed by different methods such as Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray spectroscopy (EDX), Fourier Transform InfraRed spectra (FT-IR), Dynamic Light Scattering... 

In current study, a meta-analysis approach was used to identify and evaluate the impact of various factors on the performance of integrated systems of anaerobic digestion with microbial electrolysis cell. In this study, related articles on the topic were systematically identified and collected according to the considered criteria, and the effect size that refers to the value of the difference between variables mean (total chemical oxygen demand (TCOD) removal rate and CH4 yield) was estimated. According to the meta-analysis, fed-batch operation mode, the range of 20< temperature ≤30 °C, metal cathodes, the range of 500< anode surface area ≤5000 cm2, HRT (hydraulic retention time) >20 days,... 

We introduce an effective method for copper indium sulfide selenide (CISSe) doping with different alkali metals (Li, Na and K) based on a pre-deposited alkali chloride layer. A simple and fast spray method is used for pre-deposition of alkali chloride layer (LiCl, NaCl, KCl) on substrate surface before spray pyrolysis deposition of copper indium disulfide CuInS2 (CIS) films followed by selenization. The different properties of alkali-doped CISSe films by the alkali chloride pre-deposition (ACPD) method were compared to the post-deposition treatment (PDT) method. Based on FESEM images, a highly compact film with large grains can be obtained for CISSe films doped with K(∼0.72 μm) and Na (∼0.56... 

This research investigates the effect of process parameters on the geometry and properties of In625 parts, manufactured by the direct laser metal deposition (DLMD) process. For this purpose, eight parts, consisting of 5 layers on top of each other, were manufactured, and the effect of laser power, laser focal plane position, and scanning speed on the height, width, and surface smoothness of each of them was investigated using design of experiment (DOE). The experimental results showed that the height of the parts manufactured by 800 W/mm and 200 W/mm of energy density is 3.69 mm and 6.12 mm, respectively. The thickness of the parts manufactured by 80 W/mm and 200 W/mm of energy density is... 

Magnetic field effects are encountered in many engineering applications which include but are not limited to metal casting, nuclear reactor coolers, and geothermal energy extraction. On the other hand, due to their outstanding thermal performance, nanofluids have been successful in obtaining acceptability as per the new generation of heat transfer fluids in automotive cooling devices, in heat exchangers, and building heating. Therefore, this research is carried out to understand how the nanofluid flow in a cavity is affected by a magnetic field (due to a dipole placed nearby). The single-phase model is employed for modeling the nanofluid, whereas the governing partial differential equations... 

This study investigates the effect of cold rolling prior to inter-critical annealing on microstructure and mechanical properties of ferrite-martensite dual phase steel. Samples were heated to 850 °C for 1 h followed by oil quenching, then the steel sheet were cold rolled by 0%,10%,15% and 20% reduction in thickness. The inter-critical annealing treatment (750 °C, 120min) was performed to generate a ferrite-martensite microstructure. Microstructural studies showed that increasing the applied cold rolling, leading to increase in volume fraction of martensite and decrease in ferrite grain size. Mechanical properties of dual phase steel were measured by tensile, impact and hardness tests.... 

Rare earth oxides with a trivalent nature play a pivotal role in reinforcing the magneto-optical attributes of spinel ferrite nanoparticles by replacing Fe3+ ions. In this study, rare earth Gd oxide doped with CoFe2O4 NPs with a composition of Co1+xGdxFe2-2xO4 (x = 0, 0.05, 0.10, and 0.15) were synthesized using sol-gel auto-combustion. The outcome of Gd cations on the physical, magneto-optical and electrical characteristics of the cobalt ferrite NPs were reported. X-ray diffraction (XRD), and Fourier transform infrared (FTIR) investigations confirmed the single-phase cubic crystalline nature and metal ion stretching in the cobalt ferrite synthesized samples. Decreasing drift in the average... 

This paper addresses the process-microstructure-strength correlation during dissimilar brazing of TiAl alloy to IN738 Ni-based superalloy using Ni–4Si–3.2B filler metal. The solid/liquid reactions, solidification phenomena, and solid-state phenomena are analyzed. The thickness of the athermal solidification zone and reaction layer at different bonding conditions (holding times and temperatures) determined and analyzed using a Larson–Miller parameter (LMP). It was resulted that the shear strength of the joint can be formulated regarding bonding temperature and holding time through using LMP. It was found that the sizes of athermally solidified zone and reaction layer are two key factors... 

In this study, antibacterial activity, biocompatibility, and corrosion resistance of 316 LVM implants were improved using the development of HAp/GO/Ag nanocomposite coatings by the dip-coating method. The XRD and FTIR results confirmed the synthesis of HAp/GO/Ag nanocomposites. HAp/Ag nanoparticles (68 nm) bound to epoxy, hydroxyl, and carboxyl functional groups on GO sheets (size of GO sheets varies from 255 to 1480 nm) by electrostatic interaction. FESEM images showed that HAp/GO/Ag coatings had higher density and fewer micro-cracks than pure HAp coatings. In addition, HAp/GO/Ag coatings showed optimized nano-hardness (4.5 GPa) and elasticity modulus (123 GPa). The results of... 

Bipolar Plates (BPPs) are the most crucial component of the Polymer Electrolyte Membrane (PEM) fuel cell system. To improve fuel cell stack performance and lifetime, corrosion resistance and Interfacial Contact Resistance (ICR) enhancement are two essential factors for metallic BPPs. One of the most effective methods to achieve this purpose is adding a thin solid film of conductive coating on the surfaces of these plates. In the present study, 410 Stainless Steel (SS) was selected as a metallic bipolar plate. The coating process was performed using titanium nitride and chromium nitride by the Cathodic Arc Evaporation (CAE) method. The main focus of this study was to select the best coating... 

Metal-Organic Frameworks (MOFs) are a new class of crystalline microporous solids with superior properties compared to their inorganic counterparts that offer a great variety of properties. Fe-MIL-88A is a biocompatible MOF with a flexible structure that can be synthesized in various morphologies via different chemical methods. The present study proposes two efficient methods, namely, microemulsion and surfactant-assisted solvothermal method, to prepare Fe-MIL-88A nanorods with narrow size distribution and well-defined morphology. The morphology, crystalline and chemical structure of the prepared samples were studied using FESEM images, XRD patterns and FTIR spectra, respectively, and their... 

Based on the linear fluid-solid interaction (FSI) model and classical shell theories, vibration behavior of sandwich cylindrical shells subjected to external incompressible or compressible fluid flow is investigated. The sandwich shell includes the same outer and inner face sheets made of carbon nanotube (CNT) reinforced composites and a metal foam core. The effective mechanical properties of CNT reinforced composites are obtained using the extended rule of mixture. Also, the porosity distribution through the foam thickness is assumed to be in the form of a trigonometric function. Equations of motion and corresponding boundary conditions are derived according to the Donnell's, Love's and... 

A short lifespan and increased consumption patterns make e-waste the world's fastest-growing waste stream. Computers are one of the most significant parts of e-waste. Recycling of e-waste has been introduced as the main solution to deal with environmental problems and to save natural mines. This research aims to investigate the bioleaching of Cu, Ni, and Al from computer printed circuit boards (CPCBs) using Penicillium simplicissimum. The adaptation phase began at 1 g/l CPCBs powder with 107 spores and final pulp density was reached at 30 g/l. The most effective parameters including pulp density, initial pH, and the sucrose concentration were optimized to achieve maximum simultaneous... 

Atomic force microscopy (AFM) is an efficient tool for studying the structural heterogeneity in metallic glasses (MGs). However, time-consuming analysis and limitations in the scanning process are downsides of this experiment. To tackle these problems, a machine learning (ML) model was developed to predict the distribution of energy dissipation on the MG surface with the increase in number of AFM scanning. The results indicated that it was possible to accurately predict the energy of scanning points, leading to a timesaving and reliable study. Moreover, characterization of structural heterogeneity shows that the viscoelastic response of each nanoscale region under sequences of AFM scans... 

Tunable microwave absorption characteristics are highly desirable for industrial applications such as antenna, absorber, and biomedical diagnostics. Here, we report BiNdxCrxFe1-2xO3 (x = 0, 0.05, 0.10, 0.15) nanoparticles (NPs) with electromagnetic matching, which exhibit tunable magneto-optical and feasible microwave absorption characteristics for microwave absorber applications. The experimental results and theoretical calculations demonstrate the original bismuth ferrite (BFO) crystal structure, while Nd and Cr injection in the BFO structure may cause to minimize dielectric losses and enhance magnetization by producing interfacial defects in the spinel structure. Nd and Cr co-doping plays...