Sharif Digital Repository

Three different spinel metal oxide catalytic systems including NiFe2O4, CuFe2O4 and CoFe2O4 were synthesized using co-precipitation technique and their catalytic activities were compared to each other in α-arylation of oxindole derivatives under the optimized reaction conditions. Both nickel ferrite and copper ferrite magnetic nanoparticles show approximately the same behavior in these reactions but cobalt ferrite ones indicate slightly different properties and were not as good as the other two catalysts. These superparamagnetic catalysts allowed that α-arylation of different types of oxindoles will occur in high yields under mild conditions and at very short times  

A highly sensitive and simple indirect spectrophotometric method has been developed for the determination of trace amounts of inorganic mercury (Hg2 +) in aqueous media. The method is based on the inhibitory effect of Hg2 + on the activity of horseradish peroxidase (HRP) in the oxidation of ascorbic acid by hydrogen peroxide followed by the reduction of Au3 + to Au-NPs by unreacted ascorbic acid and the measurement of the absorbance of localized surface plasmon resonance (LSPR) peak of gold nanoparticles (at 530 nm) which is directly proportional to the concentration of Hg2 +. Under the optimum conditions, the calibration curve was linear in the concentration range of 1-220 ng mL- 1. Limits... 

The current study presents a supercritical synthesis of magnetite-reduced graphene oxide (M-RGO) in methanol media, in which Fe3O4 nanoparticles are simultaneously formed, surface modified and decorated on the surface of the reduced graphene oxide. Simulations using density functional theory, which were performed using the M06-2x/cc-pVDZ level of theory, indicate that upon adsorption of a Fe3O4 cluster on the graphene, the overall charge on the graphene surface becomes about -0.0236e, indicating charge transfer from the Fe3O4 cluster to the graphene surface. Instrumental and chemical analyses exhibited the formation of strong bonds between Fe3O4 and graphene, through C-O-Fe and C-Fe bridges.... 

In this study, a multivariate-based strategy was developed for simultaneous determination of thirteen carcinogenic polycyclic aromatic hydrocarbons (PAHs) in water samples using gold nanoparticles (AuNPs) as solid-phase extraction (SPE) sorbent combined with gas chromatography (GC). The extraction technique is based on the strong affinity between citrate-capped AuNPs and PAHs. Furthermore, characterization of AuNPs was performed by UV-vis spectroscopy and transmission electron microscopy (TEM) techniques. A rotatable central composite design (CCD) combined with multiple linear regression (MLR) was used for designing the extraction procedure and developing models using the GC peak areas of 13... 

By using graphene nanosheets decorated with Ag nanoparticles (AgNPs-G) as an effective approach for the surface modification of pyrolytic graphite electrode (PGE), a sensing platform was fabricated for the sensitive voltammetric determination of Azathioprine (Aza). The prepared AgNPs-G nanosheets were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), UV-vis and Raman spectroscopy techniques. The electrochemical behavior of Aza was investigated by means of cyclic voltammetry. Comparing to the bare PGE, a remarkable enhancement was observed in the response characteristics of Aza on the surface of the modified electrode (AgNPs-G/PGE) as well as a noticeable... 

TiO2, transition metal (Cr, Mn, Fe, Co, Ni, Cu, and Zn)- and aluminum-doped TiO2 nanoparticles were prepared by the sol-gel technique. The sulfated catalysts were prepared by the impregnation method with H2SO4 solution. The catalysts were characterised by X-ray diffraction (XRD), BET surface area measurement, diffuse reflectance spectroscopy (DRS), and Fourier transform infrared (FTIR) techniques. The sulfate content of the metal-incorporated samples was considerably higher than for SO4 2-/TiO2. The metal doping brought about a considerable reduction in the extent of sulfate loss from the catalyst surface due to the wide dispersion on the surface. The SO4 2-/TiO2 and SO4 2-/M/TiO2... 

The plasmonic effects of infiltrated silver (Ag) nanoparticles, with different contents, inside a nanostructured TiO2 film on the photovoltaic performance of dye-sensitized solar cells (DSSCs) are explored. The synthesized Ag nanoparticles are immobilized onto deposited TiO2 nanoparticles by a new strategy using 3-mercaptopropionic acid (MPA), a bifunctional linker molecule. Transmission electron microscope (TEM) images show that monodispersed Ag and polydispersed TiO2 nanoparticles have an average diameter of 12 ± 3 nm and 5 ± 1 nm, respectively. Moreover, Fourier transform infrared spectroscopy (FTIR) analysis reveals that Ag nanoparticles were successfully functionalized and capped with... 

In order to improve the performance of thin film devices, it is necessary to characterize their mechanical, as well as electrical, properties. In this work, a model is developed for analysis of the mechanical and electrical properties and the prediction of residual stresses in thin films of silver nanoparticles deposited on silicon substrates. The model is based on inter-particle diffusion modeling and finite element analysis. Through simulation of the sintering process, it is shown how the geometry, density, and electrical resistance of the thin film layers are changed by sintering conditions. The model is also used to approximate the values of Young's modulus and the generated residual... 

In this study, the effect of surface modified silver nanoparticles on the corrosion protection of an epoxy coating on mild steel was studied. An organosilane (3-methoxy silyl propyl metacrylate) was used as a surface modifier to increase the dispersability of the inorganic nanoparticles in the organic epoxy coating matrix. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were used to characterize the surface modified nanoparticles. Differential scanning colorimetry (DSC) was employed to study the effects of modified and unmodified nano-silver on the curing heat and glass transition temperature of the epoxy coatings. Salt spray and electrochemical impedance... 

Aluminum metal-matrix nanocomposites (AMMNCs) fabricated by conventional stir-casting process usually show high porosity and poor distribution of nanoparticles within the matrix. In the current study, for the improvement of nanoparticles distribution in the aluminum matrix and enhancement of the mechanical properties, a mixture of Al/nano-Al2O3 powders were injected by pure argon gas into the molten 7075 aluminum alloy and this mixture was extruded at high temperature. Mechanical behavior of the final product was investigated by tensile and compression tests, hardness measurements, Scanning Electron Microscopy (SEM), High Resolution Transmission Electron Microscopy (HRTEM) and Optical... 

A nanocomposite consisting of polythiophene–silver was prepared and implemented as a desired sorbent for headspace needle trap extraction. Colloidal silver nanoparticles (Ag NPs) with narrow size distribution and high stability were synthesized in water–in–oil microemulsion. This simple procedure was adapted to prepare highly monodispersed Ag NPs, starting from an initial synthesis in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelles. Polythiophene (PT) was synthesized by chemical oxidative polymerization in the presence of anhydrous ferric chloride while its polymeric structure was confirmed by Fourier transform infrared spectrometry (FTIR). Eventually, the prepared PT was... 

There is a growing interest in developing high-performance sensors monitoring organophosphate pesticides, primarily due to their broad usage and harmful effects on mammals. In the present study, a colorimetric sensor array consisting of citrate-capped 13 nm gold nanoparticles (AuNPs) has been proposed for the detection and discrimination of several organophosphate pesticides (OPs). The aggregation-induced spectral changes of AuNPs upon OP addition has been analyzed with pattern recognition techniques, including hierarchical cluster analysis (HCA) and linear discriminant analysis (LDA). In addition, the proposed sensor array has the capability to identify individual OPs or mixtures of them in... 

In this work the plasmonic photocatalytic activity of ZnO/noble metals nanocomposites has been investigated. Ag nanowires and Au nanospheres were prepared and mixed with ZnO in order to prepare the nanocomposites. It was demonstrated that the composites containing the plasmonic Ag nanowires and ZnO nanoparticles showed a significant photocatalytic activity enhancement compared to the pure ZnO in decomposition of methylene blue (MB). By investigation of mechanisms governing the performance of plasmonic photocatalysts, it was found that the photocatalytic activity enhancement can be attributed to the energy transfer from Ag nanowires to the ZnO nanoparticles induced by the surface plasmonic... 

Using molecular dynamics, the behavior of nanoparticles during manipulation process is investigated in this paper. The system consists of a tip, cluster and substrate. The focus of the present research is on ultra-fine metallic nanoclusters. The system of concern is made of different transition metals. Two criteria have been proposed for evaluation of success in a pushing process. Such criteria describe the intactness of nanoparticle/substrate pair. The effects of cluster material and manipulation speed on the success of the process are investigated by atomistic simulations. Such qualitative simulation studies can evaluate the level of success of manipulation regarding different working... 

There is a growing interest in developing high-performance sensors monitoring fungicides, due to their broadly usage and their adverse effects on humans and wildlife. In the present study, a colorimetric probe has been proposed for detection of prothioconazole based on aggregation of unmodified silver nanoparticles (AgNPs). Under optimized condition, linear relationships between the concentration of prothioconazole and the absorbance ratio of A500/A395 were found over the range of 0.01 μg·mL− 1 to 0.4 μg·mL− 1 with quantification limit as low as 1.7 ng·mL− 1. Furthermore, AgNPs color change from yellow to pink-orange in presence of prothioconazole, indicates highly sensitive naked-eye... 

Gold nanoparticles supported on poly ionic-liquid magnetic nanoparticles (MNP@PIL@Au) were synthesized by reduction of HAuCl4 with sodium borohydride. The synthesized catalyst was characterized using by AAS, TEM, FT-IR, EDS, TGA and XRD techniques. The performance of the synthesized catalyst was investigated in the reduction of nitroarenes with NaBH4. The reaction was carried out for various nitroarenes in water and mild conditions with high yields. The catalyst selectivity for the reduction of nitro group in the presences of other functional groups such as halides and alkynes was fairly well. The recycling of the catalyst was done 8 times without any significant loss of its catalytic... 

The effects of thermal history on the microstructure and mechanical properties of a friction-stir-processed Al–Mg–TiO2 (3 vol.-%, 20 nm) nanocomposite were studied. It is shown that, with increases in peak temperature, a more uniform distribution of nanoparticles in the metal matrix, and a refined grain structure, are attained. Transmission electron microscopy indicated that the mechanism of grain refinement is influenced by the hard inclusions, changing from discontinuous to continuous dynamic recrystallisation. A fine-grained nanocomposite (average grain size of 3 µm) with a uniform distribution of nanoparticles is obtained after four fully-overlapping passes at 1200 rev min−1 and 100 mm... 

Due to significant reduction in fossil fuel sources, several researches have been conducted recently to explore modern sources of renewable energy. One of the major fields in the category of renewable energy harnessing devices is parabolic trough solar collector (PTC). Several parameters have effect on the overall efficiency of the PTCs. As the effect of these parameters is coupled to each other, a comprehensive investigation is necessary. In the present study, a numerical analysis is performed to examine the efficiency of PTCs via variation of several governing parameters (e.g., wind velocity magnitude, nanoparticles volume fraction, inlet temperature, and reflector's orientation). A... 

Fe3O4@SiO2-Ag catalyst was found to be highly active and selective in the N-alkylation of amines with a variety of aromatic and linear alcohols. The heterogeneous nature of the Fe3O4@SiO2-Ag catalyst allows easy recovery and regeneration by applying an external magnet for six subsequent reaction cycles. The prepared catalyst was characterized using electron microscopy techniques, X-ray diffraction, vibrating sample magnetometry and atomic absorption spectroscopy. Copyright © 2017 John Wiley & Sons, Ltd  

Metal Organic Frameworks (MOFs) have received enormous attention in catalysis field due to their special structures and various promising applications. One of the intriguing applications of MOFs is utilization of them as precursors for synthesis of metal oxide nanomaterials. Base on this strategy, in this work, we have applied Cu-MOF to prepare a series of noble metal nanoparticles (Ag and Au) decorated CuO (M/CuO) as efficient catalyst. As-prepared nanocomposites were characterized by various analytical techniques and their catalytic performances appraised by using of the catalytic reduction of p-nitrophenol to p-aminophenol as a reliable model reaction. Experimental results suggest that...