Sharif Digital Repository

In the present study, polylactic acid (PLA)/polyethylene glycol (PEG)/multiwalled carbon nanotube (MWCNT) electrospun nanofibrous scaffolds were prepared via electrospinning process and their applications for the anticancer drug delivery system were investigated. A response surface methodology based on Box-Behnken design (BBD) was used to evaluate the effect of key parameters of electrospinning process including solution concentration, feeding rate, tip-collector distance (TCD) and applied voltage on the morphology of PLA/PEG/MWCNT nanofibrous scaffolds. In optimum conditions (concentration of 8.15%, feeding rate of 0.2 mL/h, voltage of 18.50 kV and TCD of 13.0 cm), the minimum experimental... 

Two nanocatalysts of palladium over multi-walled carbon nanotubes (MWCNT) were synthesized and their catalytic properties evaluated in selective hydrogenation of acetylene. Different procedures were applied to synthesize catalysts which resulted in two distinct average particle sizes of palladium (Pd) over the MWCNT. The resulting catalysts displayed dissimilar NH3-TPD behaviors as well as different selectivity performances at lower temperatures. While enhancement of the hydrogen transfer mechanism occurred upon the temperature increase, similar behaviors for the aforementioned materials were obtained. Furthermore, it was revealed that the catalytic performance at higher temperatures did not... 

The formation of multi-walled carbon nanotubes (MWCNTs) during arc discharge in aqueous solutions of Fe2(SO4)3 and FeCl3 was studied. The concentration of iron ions changed from zero (deionized water) to 0.25 M and the cathodic products were examined by transmission electron microscopy, Raman spectrometry, and thermal gravimetric analysis. The experimental results showed that the crystallinity of MWCNTs is improved by increasing the concentration of iron ions. Nevertheless, the process yield and overall quality of the produced CNTs were significantly affected by iron concentration in the aqueous solution. This observation suggested that there should be an optimum iron concentration at which... 

Multi-Walled Carbon nanotube (MWCNTs) films were obtained by Thermal Chemical Vapor Deposition method and coated by palladium sputtering process. Raman spectroscopy was used to study alteration in quality of the carbon nanotubes after the sputtering process. Fourier Transform Infra Red (FTIR) spectroscopy showed that hydrogenation process can reduce the C{double bond, long}O to C-O and also produce O-H bond. Furthermore, the electrical resistance measurement for Pd/MWNTs films was performed in a chamber with 1% hydrogen gas in a constant dry air flow. Hydrogen sensing behavior of the films was investigated at 50 °C. Pd/MWCNTs films presented an irreversible gas response to hydrogen in the... 

The effects of various ratios of Fe/Ni/MgO and growth temperatures on yield, diameter and quality of multi-walled carbon nanotubes (MWCNTs) were studied. Thermal gravimetric analysis (TGA) confirmed that the MWCNT yield depends on Fe/Ni ratio with the following order; Fe0.5 Ni0.5 > Fe > Fe0.75 Ni0.25 > Fe0.25 Ni0.75 > Ni. The results indicated that there is an optimum temperature (940 °C) for the MWCNT growth both from quality and quantity (yield) aspects as compared to other temperatures. Moreover, the changes on Fe/Ni to MgO ratio for the MWCNT growth revealed that Fe/Ni/MgO with the ratio of 17.5/17.5/65 had the highest quality and surface area as compared to the other ratios. The... 

This study deals with an experimental investigation on the thermal performance of a mechanical wet cooling tower with counter flow arrangement by using multi-walled carbon nanotubes (MWNTs) and nanoporous graphene nanofluids. Stable nanofluids were prepared through two-step procedure by using water with properties taken from a working cooling tower in the South of Iran. Zeta potential revealed suitable stability of MWNTs and nanoporous graphene nanofluids. Thermal and rheological properties of the nanofluids were investigated. It was found that thermal conductivity increases by 20% and 16% at 45°C for MWNTs and nanoporous graphene nanofluids, respectively. The increase in density and... 

A simple platform based on a hairpin oligonucleotide switch and multi-walled carbon nanotubes (MWCNTs) for the ultrasensitive detection of specific DNA sequences has been developed. In this approach, the π-stacking interaction of single-strand DNA-MWCNT was employed to construct an electrochemical DNA biosensor. Changes to the surface conductivity, based on the MWCNT replacement, were monitored by using the electrochemical species [Fe(CN)6]3-/4- as a redox probe. Morphological and voltammetric characterizations of the electrode surface were performed using atomic force microscopy (AFM), energy dispersive spectroscopy (EDS), cyclic voltammetry (CV), differential pulse voltammetry (DPV) and... 

The main aim of the present study was to enhance the degradation capacity of Acid Blue 92 (AB92) by visible-light-active Ag3PO4 nanocomposites based on g-C3N4 and Multiwalled Carbon Nanotubes (MWCNTs). The nanocomposites were fabricated through a tunable in situ deposition method. The properties of the resulting samples were investigated by X-ray diffraction, scanning electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The photocatalytic activity results revealed that the Ag3PO4/g-C3N4 heterojunction inorganic/organic composite exhibited an improvement in both efficiency and the rate of AB92 photodegradation in comparison with the others. The enhanced photocatalytic... 

We report a new facile strategy to enhance the efficiency of TiO2 dye-sensitized solar cells (DSSCs) using Nb-doped TiO2 photoelectrodes with carbon nanotube-derived TiO2 nanotubes (CDTs). Multi-walled carbon nanotubes (CNTs) with an average diameter of 80 nm are used as the template to produce CDTs through facile sol-gel and oxidation processes at 600 °C. Field emission scanning electron microscope (FESEM) and X-ray diffraction (XRD) analyses reveal that the synthesized CDTs have a uniform thickness of 60-120 nm and a crystallite size of 17 nm. We prepare Nb-doped TiO2 nanoparticles with different atomic ratios of 0-4 at% Nb and test them as photo-electrodes to investigate the doping... 

Liquid phase hydro-purification of crude terephthalic acid (CTA) was performed using supported Pd and Pd-Sn catalysts on functionalized multi-wall carbon nanotubes (FMWCNT). Pd/FMWCNT catalysts were prepared by wet impregnation with Pd loadings of 0.05 to 0.6 wt.%. Pd-Sn/FMWCNT catalysts were prepared by co-impregnation (CI) and successive impregnation (SI) using 0.3 wt.% Pd loading and Sn/Pd molar ratios of 0.1 and 0.35 for the CI method and 0.05 to 0.35 for the SI method. Pd loading of 0.3 wt.% for Pd/FMWCNT was sufficient to decrease the 4-carboxybenzaldehyde (4-CBA) content of CTA from 2100 ppm to 5.5 ppm without excessive hydrogenation of terephthalic acid (TA). The commercial catalyst... 

In this research, multi-walled carbon nanotubes (MWCNTs) were modified by dendritic macromonomer. Herein, polyamidoamine with acrylamide end groups was incorporated on MWCNTs. Afterwards, poly(N-isopropylacrylamide), (PNIPAM), was grafted on polyamidoamine in a facile synthesis. Then, doxorubicin as anticancer drug was loaded on this nanocarrier. The drug release was studied at below and above the lower critical solution temperature of PNIPAM, (LCST 32 °C), 27 °C and 37 °C, respectively. At 37 °C (body temperature) the polymer shell dehydrated and the drug release increased. The profile of drug release was expressed by Higuchi's equation which indicated that the drug release mechanism was... 

In this paper, using the continuum approximation together with Lennard-Jones potential, a new semi-analytical expression is given to evaluate the van der Waals interaction between two single-walled carbon nanotubes. Based on this expression, two new formulations are also proposed to model multi-walled carbon nanotubes. In the first one, the interactions between each pair of shells from the inner and outer tubes are summed up over all of the pairs, whereas in the second formulation, a set of correction factors are applied to convert the results of double-walled carbon nanotubes to the correlated multi-walled ones. With respect to the present formulations, extensive studies on the variations... 

Polycaprolactone-polylactide block copolymers (PCL-block-PLA) were grafted onto filled multi-wall carbon nanotubes (MWCNT) successfully. In this synthesis, MWCNTs were opened and functionalized, and then they were filled by silver nanoparticles. The filled MWCNT were used as macroinitiator for ring opening polymerization of ε-caprolactone and L-lactide. Then the end hydroxyl functional groups of MWCNT-graft-PCL or MWCNT-graft-PLA were used as initiator for ring opening polymerization of lactide and ε-caprolactone and MWCNT-graft-PCL-block-PLA or MWCNT-graft-PLA-block-PCL were obtained, respectively. Length of grafted copolymer chains onto the MWCNT was controlled using CNT/monomer ratio.... 

Abstract: The electrodeposition of platinum nanoparticles (PtNPs) on multiwall carbon nanotubes (MWCNTs)/fluorine-doped tin oxide glass (FTO) was investigated. Nucleation and growth mechanisms were studied via Scharifker and Hills model. Chronoamperometry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficient is 1.5×10-5cm2/s. The semi-spherical particles with lamellar morphology were observed in 1M H 2SO 4, while a petal shape was discerned in 0.5M H 2SO 4. Also, dispersion, size, and uniformity of PtNPs were investigated, where the finer distribution of PtNPs with the average size less than 100 nm was obtained in 0.5M H 2SO 4... 

In this work, the adsorption of benzoic acid (BA) over metal organic framework of chromium-benzenedicarboxylates (MIL-101) is reported for the first time. The influences of pH, contact time, initial concentration, and temperature of BA solution on the adsorption behavior were investigated. The Langmuir adsorption isotherm was adequate to represent the experimental data (R2 > 0.99) and the adsorption kinetics was well-represented by a pseudo-second order kinetic model (R2 > 0.96). The zeta potential of MIL-101 decreased with increasing pH confirming the importance of electrostatic interactions between MIL-101 and BA as well as the importance of the large pore volume (1.32 m3/g) and large... 

Biodegradable acrylate-terminated polyurethane/acrylate (APUA) filled with 2-hydroxyethyl methacrylate functionalized carbon nanotube (CNT-HEMA) was prepared by in situ free radical crosslinking. CNT-HEMA enhanced crystallinity of soft domain and caused more phase separation between hard and soft domains of APUA. Tensile testing showed a considerable improvement in elastic modulus (∼160%) and tensile strength (∼30%) at 1 wt% loading. Morphological features of APUA induced by nanotubes were found to be dominant on mechanical properties of APUA/CNT-HEMA. CNT-HEMA increased water contact angle of APUA; however, wettability of APUA/CNT-HEMA maintained in acceptable range for biomedical... 

Sol-gel technique was used to coat multiwall carbon nanotubes (MWCNTs) with anatase titania to increasing the surface area and improve the photocatalytic activity of TiO2. Room temperature ballistic conduct of MWCNT combined with semiconducting behavior of anatase brought about a photocatalytic improvement of ∼37 % with respect to the highest methyl orange decolorization flair. For characterization and photocatalytic efficiency determination, X-ray diffraction (XRD), field emission (FE) scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS) and ultraviolet visible (UV-vis) spectroscopy were rehearsed. Attachment of anatase... 

Ultrafine-grained Al-CNT (2 and 4 vol%) composites were successfully fabricated using the flake powder metallurgy and hot pressing route, and the microstructure and tribological properties of the produced composites were studied. The results showed that the coefficient of friction and the wear rate of Al decrease with the addition of the CNT reinforcement. A carbon-rich film formed on the worn surfaces during wear test, which prevented the Al oxidation and yielded the self-lubricating effect for the composites. This improvement in the wear behavior of the composites can be attributed to the simultaneous effects of the ultrafine-grained matrix and strengthening and self-lubricating properties... 

The present paper describes a voltammetric sensor based on glassy carbon electrode (GCE) modified with a thin film of multi-walled carbon nanotubes (MWCNTs) coated with an electro-polymerized layer of titan yellow-doped over–oxidized polypyrrole (OPPY) for the determination of tizanidine (TIZ). A significant enhancement was observed in the anodic peak current of TIZ on the surface of OPPY/CNT/GCE, relative to the bare, CNT- and OPPY-coated GCEs. The microscopic structure and surface morphology of the composite film was thoroughly characterized by means of atomic force microscopy (AFM), scanning electron microscopy (SEM) and cyclic voltammetry (CV) techniques. The effect of various... 

Biodegradable acrylate-terminated polyurethane/acrylate (APUA) filled with 2-hydroxyethyl methacrylate functionalized carbon nanotube (CNT-HEMA) was prepared by in situ free radical crosslinking. CNT-HEMA enhanced crystallinity of soft domain and caused more phase separation between hard and soft domains of APUA. Tensile testing showed a considerable improvement in elastic modulus (∼160%) and tensile strength (∼30%) at 1 wt% loading. Morphological features of APUA induced by nanotubes were found to be dominant on mechanical properties of APUA/CNT-HEMA. CNT-HEMA increased water contact angle of APUA; however, wettability of APUA/CNT-HEMA maintained in acceptable range for biomedical...