Sharif Digital Repository

This article reports the first oil-absorbent cross-linked copolymer consisting of modified multiwalled carbon nanotube (MWCNT) and showing high oil absorbency. Also, to investigate and evaluate the effective parameters on oil absorbency, cross-linked dodecyl methacrylate (DDMA)-diphenylacrylamide (DPAA) and DDMA-butyl acrylate (BA) copolymers were synthesized. DDMA was copolymerized with different mol% of DPAA or BA and cross-linked using azobisisobutyronitrile as the initiator and various weight percentages of 1,4-butandiol dimethacrylate, methylene bisacrylamide, or vinyl group-modified MWCNT cross-linkers. The effects of monomer feed composition, cross-linker concentration, and the... 

A simple method for synthesis of novel organogels based on multiwalled carbon nanotubes (MWCNTs) is reported. Three classes of organogels were synthesized by crosslinking polymerization of dodecyl methacrylate with various weight percentages of 1,4-butanediol dimethacrylate, vinyl-group-modified MWCNTs or pristine MWCNTs in the presence of 2,2-azoisobutyronitrile as initiator. In this reaction, the carbon nanotubes (CNTs) served simultaneously as an adsorbent, a comonomer and a crosslinking agent. The oil-absorbent containing CNTs showed much higher swelling capacity in oil and organic solvents compared with that without CNTs. Therefore, CNT-based organogels can be introduced as a promising... 

The electrooxidation of clozapine (CLZ) was studied on the surface of a glassy carbon electrode (GCE) modified with a thin film of multiwalled carbon nanotubes (MWCNTs)/new coccine (NC) doped polypyrrole (PPY) by using linear sweep voltammetry (LSV). The pH of the supporting electrolyte (D), drop size of the cast MWCNTs suspension (E) and accumulation time of CLZ on the surface of modified electrode (F) was considered as effective experimental factors and the oxidation peak current of CLZ was selected as the response. By using factorial-based response-surface methodology, the optimum values of factors were obtained as 5.44, 10 μL and 300 s for D, E and F respectively. Under the optimized... 

In this study, a hybrid of silica nanosphere/multiwall carbon nanotube (MWCNT) has been synthesized by wet chemical method at room temperature. The effect of MWCNTs, silica nanospheres and hybrid nanostructures (80% silica nanosphere/20% MWCNT and 50% silica nanosphere/50% MWCNT) on the thermal conductivity of distilled water has been investigated. SDBS was used as the dispersant to stabilize nanomaterials in the aqueous suspension and its concentration was 1.5 times of the concentration of nanomaterials. As results show, by increasing the concentration of nanomaterials, effective thermal conductivity of nanofluids increased. The most and the least enhancement in the effective thermal... 

Based on the transmission line model (TLM), we present an exact and general transfer function formula, useful for both single multiwall carbon nanotube (MWCNT) and MWCNT bundle interconnects. Using the standard parameters for 22-nm technology node we perform the Nyquist stability analysis, to investigate the dependence of the degree of relative stability for both single and bundle interconnects on the number of walls in each MWCNT its geometry and also on the bundle geometry. The numerical results, for 1- to 30-μm long interconnects composed of 3- to 7-wall-CNTs, show that by increasing the length or the outer shell diameter, both single and bundle interconnects become more stable. On the... 

The electrochemical reduction of tinidazole (TNZ) is studied on gold-nanoparticle/carbon-nanotubes (AuNP/CNT) modified glassy carbon electrodes using the linear sweep voltammetry. An electrochemical procedure was used for the deposition of gold nanoparticles onto the carbon nanotube film pre-cast on a glassy carbon electrode surface. The resulting nanoparticles were characterized by scanning electron microscopy and cyclic voltammetry. The effect of the electrodeposition conditions, e.g., salt concentration and deposition time on the response of the electrode was studied. Also, the effect of experimental parameters, e.g., potential and time of accumulation, pH of the buffered solutions and... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO 2-coated multiwalled carbon nanotubes (NH 2-TiO 2-CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH 2-TiO 2-CNT nano-composite. These techniques showed that the NH 2-TiO 2-CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH 2-TiO 2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔE p) of 70.6mV and a formal potential (E 0′) of -367.65mV (versus... 

Multi-walled carbon nanotubes decorated with Fe 3O 4 nanoparticles (Fe 3O 4NPs/MWCNT) were prepared and used to construct a novel biosensor for the simultaneous detection of adenine and guanine. The direct electro-oxidation of adenine and guanine on the modified electrode were investigated by linear sweep voltammetry. The results indicate a remarkable increase in the oxidation peak currents together with negative shift in the oxidation peak potentials for both adenine and guanine, in comparison to the bare glassy carbon electrode (GCE). The surface morphology and nature of the composite film deposited on GCE were characterized by transmission electron microscopy, atomic force microscopy,... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

In this work successful synthesis of multiwall carbon nanotube (CNT) using solution combustion and chemical vapor deposition (CVD) methods are reported. Ceramic nanocomposite samples of (Al 2-xFe xO 3)-(y)ZrO 2 formula with x = 0.017, 0.034 and 0.17 and y = 0.15 were initially prepared. These were then subjected to CVD process during which the in situ reduction of iron oxide to metallic iron (Fe/Fe 3C) phase/s provided the necessary catalyst for the CNT formation. The formation of long flexible filaments with a smooth and regular surface bridging between alumina-zirconia (AZ) grains could be detected. The diameters of the formed filaments were in the range of ∼70 to ∼320 nm and length of the... 

A mixture of multi-walled carbon nanotube/graphite paste electrode modified with a salophen complex of cobalt was prepared and was applied for the study of the electrochemical behavior of 6-mercaptopurine (MP) using cyclic and differential pulse voltammetry (DPV). An excellent electrocatalytic activity toward the oxidation of MP was achieved, which led to a considerable lowering in the anodic overpotential and remarkable increase in the response sensitivity in comparison with unmodified electrode. Utilizing DPV method, a linear dynamic range of 1-100 μM with detection limit of 0.1 μM was obtained in phosphate buffer of pH 3.0. The electrochemical detection system was very stable, and the... 

The voltammetric behavior of dopamine (DA) and uric acid (UA) on a gold electrode modified with self-assembled monolayer (SAM) of cysteamine (CA) conjugated with functionalized multiwalled carbon nanotubes (MWCNTs) was investigated. The film modifier of functionalized SAM was characterized by means of scanning electron microscopy (SEM) and also, electrochemical impedance spectroscopy (EIS) using para-hydroquinone (PHQ) as a redox probe. For the binary mixture of DA and UA, the voltammetric signals of these two compounds can be well separated from each other, allowing simultaneous determination of DA and UA. The effect of various experimental parameters on the voltammetric responses of DA and... 

Multi-walled carbon nanotubes (MWCNTs) with diameter of about 50 nm were synthesized using thermal chemical vapor deposition. We have investigated the influence of Mg doping to the MWCNTs on its hydrogen storage property. TEM micrographs showed that Mg was attached to the MWCNTs and discontinuous arrangement of the carbon walls was recognized in the MWCNTs. According to XPS and BET analyses, the surface functional groups and pore size of the Mg-MWCNTs are increased by interactions between the Mg and the MWCNT's outer walls. The electrochemical discharging curves of the MWCNTs and Mg-doped MWCNTs revealed that the hydrogen storage capacity was 363 and 450 mAhg -1, respectively. Volumetric... 

A composite film constructed of surfactant doped over-oxidized polypyrrole and multi-walled carbon nanotube was prepared on the surface of glassy carbon electrode by the electro-polymerization method. Surface characterization of the modified electrode was performed by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectrometry. The investigations have been proved that the over-oxidation of the modifier film resulted in a porous thin layer that improves the interlayer diffusion mechanism for the electroactive species. On the other hand, the negative charge density on the surface of the electrode excludes the negative analytes (e.g. ascorbate and Fe(CN)63?/4?)... 

A new sensitive electrochemical sensor was fabricated based on a layer by layer process. In this process the glassy carbon electrode (GCE) is first coated by a thin film of multiwalled carbon nanotubes (MWCNTs). In the next step, the electropolymerization of pyrrole in the presence of Nitrazine Yellow (NY) as a dopant anion is performed on the surface of the MWCNTs precoated electrode. The electrochemical response characteristics of the modified electrode toward naltrexone (NTX) were studied by means of linear sweep voltammetry (LSV). A remarkable increase (~19 times) was observed in the anodic peak current of NTX on the surface of the modified electrode relative to the bare GCE. The effects... 

A modified glassy carbon electrode, prepared by potentiostatic electrodeposition of platinum-ruthenium nanoparticles (Pt-RuNPs) onto a multi-walled carbon nanotube (MWCNT) layer, offers dramatic improvements in the stability and sensitivity of voltammetric responses toward methyldopa (m-dopa) compared to glassy carbon electrodes individually coated with MWCNT or Pt-RuNPs. The surface morphology and nature of the hybrid film (Pt-RuNPs/MWCNT) deposited on glassy carbon electrodes was characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) techniques. A remarkable enhancement in the microscopic area of the electrode together... 

A promising electrochemical sensor was developed based on a layer by layer process by electro-polymerization of pyrrole in the presence of new coccine (NC) as dopant anion on the surface of the multi-walled carbon nanotubes (MWCNTs) pre-coated glassy carbon electrode (GCE). The modified electrode was used as a new and sensitive electrochemical sensor for voltammetric determination of sumatriptan (SUM). The electrochemical behavior of SUM was investigated on the surface of the modified electrode using linear sweep voltammetry (LSV). The results showed a remarkable increase (∼12 times) in the anodic peak current of SUM in comparison to the bare GCE. The effect of experimental variables such... 

Two types of unfunctionalized and functionalized multi-wall carbon nanotubes (MWCNTs) were prepared to be applied in fabrication of MWCNT-ZnO nanocomposite thin films with various MWCNT contents. X-ray photoelectron spectroscopy indicated formation of functional groups on surface of the functionalized MWCNTs in the MWCNT-ZnO nanocomposite. Formation of the effective carbonaceous bonds between the ZnO and the MWCNTs was also investigated through photoinactivation of Escherichia coli bacteria on surface of the both unfunctionalized and functionalized MWCNT-ZnO nanocomposites. The functionalized MWCNT-ZnO nanocomposites showed significantly stronger photoinactivation of the bacteria than the... 

Iron oxide nanoparticles, γ-Fe2O3NP, were deposited onto the surface of multi-walled carbon nanotubes and CNT/γ-Fe2O3NP hybrid nanomaterials were obtained. Then linear-dendritic ABA type block copolymers consisting of polyethylene glycol as B block and poly(citric acid) as A block, PCA-PEG-PCA, were synthesized and cisplatin (cis-diamminedichloroplatinum (CDDP) - a platinum-based chemotherapy drug) was conjugated with their carboxyl functional groups and CDDP/PCA-PEG-PCA anticancer prodrugs were prepared. Noncovalent interactions between CDDP/PCA-PEG-PCA anticancer prodrugs and CNT/γ-Fe2O3NP hybrid nanomaterials led to CDDP/PCA-PEG-PCA/CNT/γ-Fe2O3NP drug delivery systems. There are several... 

Reinforcement of styrene-butadiene-rubber (SBR) was investigated using two different carbon blacks (CBs) with similar particle sizes, including highly structured CB and conventional CB, as well as multi-walled carbon nanotube (MWCNT) prepared by mechanical mixing. The attempts were made to examine reinforcing mechanism of these two different classes of carbon nanoparticles. Scanning electron microscopy and electrical conductivity measurement were used to investigate morphology. Tensile, cyclic tensile and stress relaxation analyses were performed. A modified Halpin-Tsai model based on the concept of an equivalent composite particle, consisting of rubber bound, occluded rubber and...