Sharif Digital Repository

The WO3/multiwalled carbon nanotubes (MWNTs) hybrid films were fabricated by spin-coating on an alumina substrate. The structure, morphology, chemical composition and quality of the as-prepared WO3 nanoparticles, functionalized MWNTs and WO3/MWNTs hybrid films were studied by SEM, TEM, XRD, XPS, DLS and Raman spectroscopy methods. Results show that WO3 nanoparticles were nucleated on oxygenated functionalized MWNTs in hybrid suspension. After coating and annealing the films at 350 °C, the hybrid WO3/MWNTs films present rather linear gas sensitivity as a function of hydrogen concentrations at 300 °C. Results are discussed based on surface increase as well as development of two types of... 

In this study, the inclusion of multi-walled carbon nanotubes as the second phase in the hydroxyapatite matrix, in order to improve the mechanical strength, has been performed via the sol-gel process. The stability of carbon nanotube sol with the changes of pH and dispersant values (sodium dodecyl sulfate) was evaluated by zeta potential analysis. The results indicated that synthesis of hydroxyapatite particles in the presence of the carbon nanotubes had the best result in homogenization of the carbon nanotube dispersion and faster crystallization of hydroxyapatite. The crystallization of hydroxyapatite phase was investigated with differential scanning calorimetry (DSC) and X-ray diffraction... 

New biocompatible and water soluble hybrid materials containing multi-wall carbon nanotubes (MWCNTs) as core and hyperbranched polyglycerol (PG) as shell were synthesized successfully. In this work, pristine MWCNTs were opened and functionalized through treatment with acid and polyglycerol was covalently grafted onto their surface by the "grafting from" approach based on in-situ ring-opening polymerization of glycidol. Some short-term In vitro cytotoxicity and hemocompatibility tests were conducted on HT1080 cell line (human Fibrosarcoma), because this epithelial cell line can be one of the first route of entry of the exogenous materials to the vascular system and therefore subsequent... 

In this research, it is aimed to enhance the heat transfer properties of the carbon nanotubes through nitrogen doping. To this end, nitrogen-doped multiwall carbon nanotubes (N-CNTs) were synthesized via chemical vapor deposition method. For supplying carbon and nitrogen during the synthesis of N-CNTs, camphor and urea were used, respectively, at 1000 °C over Co–Mo/MgO nanocatalyst in a hydrogen atmosphere. N-CNTs with three different nitrogen loadings of 0.56, 0.98, and 1.38 mass% were synthesized, after which, water/N-CNT nanofluids of these three samples with concentrations of 0.1, 0.2, and 0.5 mass% were prepared. To obtain a stable nanofluid, N-CNTs were functionalized by nitric acid... 

Imidazolium-based ionic liquids (ILs) have been perceived as a promising candidate for bridging polyaniline (PANI) on well-dispersed carbon nanotubes (CNTs) via formation of IL-stabilized multiwalled carbon nanotubes (MWCNTs) dispersion in which outer walls of CNTs, as well as benzene rings of the aniline monomer and the growing polymer, have been potently effective in such procurement. The sulfonated water-soluble PANI-[C16C1im]Cl-MWCNT nanocomposites (SPANI-IL-MWCNTs) are directly deposited on a graphite-based current collector using a simple and cost-effective electrophoretic deposition (EPD) method. The SPANI-IL-MWCNT electrodes exhibit remarkable electrochemical performance compared to... 

Supported Pt–TiO₂ photocatalysts on carbonaceous supports were synthesized by the electrostatic self-assembly method to study CO₂ photoreduction to produce CH₄. Catalytic activities of the prepared photocatalysts were correlated with the particle size and dispersion of the active metal, which in turn depended on the type of carbonaceous support used, varying in the order of multi-walled carbon nanotubes (MWCNT) > Single-walled carbon nanotubes (SWCNT) > reduced graphene oxide > activated carbon. Generally, all catalysts were highly photoresistant with less than 5% loss of activity in terms of CH₄ yield. Pt–TiO₂/multi-walled carbon nanotubes exhibited better catalytic activity compared with... 

In this study, we investigate the use of catalytic copper-silver-palladium substrates for the growth of multiwalled carbon nanotubes via the thermal chemical vapor deposition. These layers are comprised of nanocrystals of Cu2O, CuO, Ag, Pd, Cu, and PdO and were grown using a DC magnetron sputtering method. Scanning electron microscopy characterizations confirmed the significant growth of carbon nanotubes on the catalytic layer. A comparison of the growth of nanotubes indicated that the thickness of the catalytic layers has a significant impact on the quality and the diameter of the carbon nanotubes. Two major peaks were seen in the Raman spectrum. The formation of graphite multiwalled... 

In the current research, a three-dimensional photovoltaic thermal system integrated with phase change material system with nanofluids is investigated. The working fluids involved in this study include nano-magnesium oxide, multiwall carbon nano tube and hybrid (mixture of nano-magnesium oxide and nano-multiwall carbon nano tube) nanofluids dispersed in pure water. After comparing single-phase model and mixture model, the mixture model is used in the study and fluid flow regime in the collector is assumed to be laminar, fully develop, uniform and incompressible, to model the nanofluid in the system. A parametric analysis is conducted to examine the effect of various parameters such as working... 

The effects of HCl, HNO3, H2SO4 and HF acids on the purification and the electrochemical hydrogen storage of multi-walled carbon nanotubes (MWCNTs) were studied. The MWCNTs were synthesized on Fe-Ni catalyst by thermal chemical vapor deposition method. The X-ray diffraction and thermal gravimetric analysis results indicated that the MWCNTs purified by HF acid had the highest impurities as compared with the other acids. The N2 adsorption results at 77 K indicated that all the samples were mainly mesoporous and the purified MWCNTs by HF acid had the highest surface area as compared with the other acids. The hydrogen storage capacities of the purified MWCNTs by the following acids were in... 

In this work, single- and double-layer electromagnetic wave absorbers were prepared by as-prepared MWCNTs/BaTiO3/pitted carbonyl iron composites. MWCNT/BaTiO3 (MW/BTO) was prepared via sol-gel method whereas the carbonyl iron particles (CI) were corroded via pitting corrosion method. The structural, microstructural, magnetic and microwave absorption properties of the composites were evaluated via X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), vibrating sample magnetometer (VSM) and vector network analyzer (VNA) methods. CST studio software was employed to simulate the microwave absorption characteristics of double-layer absorbers. Moreover, the effects of... 

Carbon-based nanocarriers such as multiwall carbon nanotubes (MWCNTs) and reduced graphene oxide (rGO) have shown promising delivery capabilities due to their low immunogenicity, superior internalization, and suitable cell penetration efficiency. Herein, a molecular engineering strategy is advanced for the one-pot synthesized rGO/MWCNT/Fe3O4/ZnO to enhance the stability of the nanocarrier in the biological matrix; green synthesized ZnO was responsible for water uptake and reduced cytotoxicity, while Fe3O4controlled the cellular internalization for gene delivery. Surface morphology of the ensuing nanocomposite was correlated with photocatalytic and gene delivery (CRISPR/Cas9) features. For... 

In this article, the novel concept of using magnetic nanofluidic electrolyte for redox flow batteries is demonstrated for the first time. In this regard, the stable magnetic nanofluidic electrolytes are prepared by dispersing magnetic modified multiwalled carbon nanotubes (MMWCNTs) in the positive electrolyte of a polysulfide-iodide redox flow battery at mass concentrations of less than 0.3 g L−1. The electrochemical behavior of magnetic nanofluidic electrolyte was examined using cyclic voltammetry at different mass concentrations of MMWCNTs with a carbon felt electrode. Higher and stable peak current densities were observed at larger mass concentrations of MMWCNTs. A polysulfide-iodide... 

Demand for high-capacity, long cycle life, and aqueous batteries based on abundant metals such as nickel, zinc, aluminum, and so on is rising in the energy storage field. In this study, we design a hierarchical morphology as a nanosheet-built microsphere of nickel vanadium layered double hydroxide (NiV LDH) with conductive agents graphene oxide (GO) and multiwalled carbon nanotubes (CNTs) through a low-cost hydrothermal synthesis method. The experimental results demonstrate that the graphitic structures and functional groups of the GO and CNT play an important role in controlling nucleation, growth speed, size, and finally morphology of hierarchical nanosheets. The electrochemical results... 

An efficient and commercially available method is introduced for preparation of a binder-free electrode for capacitive deionization (CDI) application. An interconnected porous composite consisting of polyphosphate (PPO), graphene (Gr) and multi-walled carbon nanotube (CNT) is fabricated and assembled on a Ni foam substrate to prepare a binder-free electrode (Ni/PPOGrCNT). The resulting electrodes were characterized using various instrumental techniques such as TEM, SEM, EDS, XRD, FT-IR, Raman, XPS and XRF. Characterization results indicated that a mesoporous PPO structure is formed on a 3D assembly of carbon backbone. Accordingly, the 3-D porous structure facilitates the ion diffusion into... 

Although Multi-Walled Carbon NanoTubes (MWCNTs) are found to influence the rheological behavior of drilling fluids, there are yet some controversies regarding their performance towards reducing formation damage induced by the invasion of water-based drilling fluids (WBFs). To address this important question, we synthesized novel nanocomposite materials via modifying the MWCNT via varying the proportion of carboxylated MWCNTs to PolyVinyl Alcohol (PVA). These nanocomposites were then used to make nano-based drilling-fluids (NDFs). The performance of the NDFs was evaluated by a set of rheological behavior tests, filtration experiments, and core-scale mud flow tests. To distinguish between the... 

In this paper, the effects of the multi-walled carbon nanotubes (MWCNTs) and nanographene (GP) on the mechanical performance of the cementitious mortars were investigated in different environments. Six mix designs were fabricated by considering the previous studies and exposed to potable water, acidic, and alkaline environments. The GP and MWCNTs partially replaced the cement with 0.25 %, 0.5 %, and 1 % of its weight. The standard mechanical tests, X-ray diffraction (XRD), and scanning electron microscope (SEM) analysis were performed on the specimens. The results indicated that including the MWCNTs and GP increases the compressive strength by 10 % and 20 % and similarly improves the tensile... 

In this research study, interfacial assembled nanoporous zeolitic imidazolate framework (ZIF-8) multiwalled oxidized carbon nanotubes (MW-OCNTs) were developed and introduced into a silane coating. To analyze the destructive behavior of the nanoparticles exposed to salty solutions with three distinctive pHs of 2, 7.5, and 12, various types of tests such as X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and inductively coupled plasma (ICP) were accomplished. The XRD test revealed that the main characteristic peaks of ZIF-8 were eliminated and/or their intensity decreased. In accordance with the obtained data from the XRD test, nanoparticles at pH = 2 had been... 

Because of the low outflow temperature of the conventional photovoltaic thermal systems and lack of electrical production of the solar thermal collectors, a novel combined system is proposed to solve the two mentioned drawbacks. This novel system is achieved by connecting a photovoltaic thermal unit to a solar thermal collector in series. To increase the overall performance of this novel combined system, different hybrid nanofluids include (1) multiwall carbon nanotube-aluminum oxide (2) multiwall carbon nanotube-silicon carbide (3) graphene-aluminum oxide, and (4) graphene-silicon carbide are compared. The investigation is performed based on the three-dimensional simulation, and the... 

In this work, a green synthesis method was designed and practiced to develop bioactive and biocompatible carbon-based nanocomposites biomaterials. ZnO nanoparticles were synthesized in assistance of leaf extracts and added to a composite nanostructure composed of the reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNT). The resulting green nanocomposite revealed ability to make π-π interactions, hydrogen bonding, and van der Waals interactions with the doxorubicin (DOX). Then, the surface morphology of the synthesized nanocomposite was investigated, and the interrelationship between the surface morphology, relative cell viability, and drug uptake and release behavior were... 

The electrochemical reduction of tinidazole (TNZ) is studied on gold-nanoparticle/carbon-nanotubes (AuNP/CNT) modified glassy carbon electrodes using the linear sweep voltammetry. An electrochemical procedure was used for the deposition of gold nanoparticles onto the carbon nanotube film pre-cast on a glassy carbon electrode surface. The resulting nanoparticles were characterized by scanning electron microscopy and cyclic voltammetry. The effect of the electrodeposition conditions, e.g., salt concentration and deposition time on the response of the electrode was studied. Also, the effect of experimental parameters, e.g., potential and time of accumulation, pH of the buffered solutions and...