Sharif Digital Repository

TiO2 nanoparticles supported on activated carbon (AC) and multiwalled carbon nanotubes (MWCNTs) were prepared by the sol-gel method using ultrasonic irradiation. All the prepared samples were calcined at different temperatures and characterized by X-ray diffraction, nitrogen adsorption/desorption isotherms, scanning electron microscopy, transmission electron microscopy and diffuse reflectance spectroscopy. The effects of size and type of carbon on the morphology and photocatalytic activity of the resulting hybrid materials were investigated. The results showed that a decrease in the size of the carbon led to a decrease in size of TiO2 nanoparticles. Both AC and MWCNTs retarded the... 

Vertically aligned multi-wall carbon nanotube (CNT) arrays were fabricated in tip-growth mode on Ni/Si substrates using plasma enhanced chemical vapor deposition. In a purification process including hydrogenation and acid washing of the Ni/CNTs, the oxygen-containing functional groups were substantially reduced and a wide hollow core at the tip of the CNTs was formed by removing the Ni seeds. Sol-gel silver nanoparticles were deposited on the surface of the unpurified Ni/CNTs, while they could also be embedded within the hollow core of the Ni-removed CNTs. The persistency of the silver ions in the Ni-removed Ag-CNTs in comparison to the release of the silver ions from the Ag-Ni/CNTs in a... 

In this study, a hybrid of silica nanosphere/multiwall carbon nanotube (MWCNT) has been synthesized by wet chemical method at room temperature. The effect of MWCNTs, silica nanospheres and hybrid nanostructures (80% silica nanosphere/20% MWCNT and 50% silica nanosphere/50% MWCNT) on the thermal conductivity of distilled water has been investigated. SDBS was used as the dispersant to stabilize nanomaterials in the aqueous suspension and its concentration was 1.5 times of the concentration of nanomaterials. As results show, by increasing the concentration of nanomaterials, effective thermal conductivity of nanofluids increased. The most and the least enhancement in the effective thermal... 

Based on the transmission line model (TLM), we present an exact and general transfer function formula, useful for both single multiwall carbon nanotube (MWCNT) and MWCNT bundle interconnects. Using the standard parameters for 22-nm technology node we perform the Nyquist stability analysis, to investigate the dependence of the degree of relative stability for both single and bundle interconnects on the number of walls in each MWCNT its geometry and also on the bundle geometry. The numerical results, for 1- to 30-μm long interconnects composed of 3- to 7-wall-CNTs, show that by increasing the length or the outer shell diameter, both single and bundle interconnects become more stable. On the... 

Thermal degradation behavior of multi-wall carbon nanotubes (MWCNTs)/ultra high molecular weight polyethylene (UHMWPE) nanocomposites, with different nanotubes contents (0.5, 1.5 and 3.5 wt%) prepared via in-situ polymerization technique have been investigated using thermal gravimetric analysis (TGA). TGA spectra revealed that these nanocomposites had enhanced thermal stability and no significant mass loss (<0.4 wt%) occurred up to 350°C. Thermal degradation of these UHMWPE/MWCNT nanocomposites was investigated in terms of parameters such as the onset temperature of degradation (T 10), the decomposition temperature at 50% wt loss (T 50), the degradation temperature of maximum rate of the... 

The electrochemical reduction of tinidazole (TNZ) is studied on gold-nanoparticle/carbon-nanotubes (AuNP/CNT) modified glassy carbon electrodes using the linear sweep voltammetry. An electrochemical procedure was used for the deposition of gold nanoparticles onto the carbon nanotube film pre-cast on a glassy carbon electrode surface. The resulting nanoparticles were characterized by scanning electron microscopy and cyclic voltammetry. The effect of the electrodeposition conditions, e.g., salt concentration and deposition time on the response of the electrode was studied. Also, the effect of experimental parameters, e.g., potential and time of accumulation, pH of the buffered solutions and... 

Horseradish peroxidase (HRP) was successfully immobilized on amine functionalized TiO 2-coated multiwalled carbon nanotubes (NH 2-TiO 2-CNTs) by a convenient and efficient method. Electrochemical impedance spectroscopy, cyclic voltammetry and amperometry were applied to characterize the HRP/NH 2-TiO 2-CNT nano-composite. These techniques showed that the NH 2-TiO 2-CNTs greatly enhance the electron transfer between HRP and the modified electrode. Owing to the redox reaction of the electroactive centre of HRP, the HRP/NH 2-TiO 2-CNTs modified electrode exhibited a pair of quasi-reversible peaks with a peak-to-peak separation (ΔE p) of 70.6mV and a formal potential (E 0′) of -367.65mV (versus... 

In this research, ultrahigh-molecular-weight polyethylene (UHMWPE)/multiwalled carbon nanotube (MWCNT) nanocomposites with different nanotube concentrations (0.5, 1.5, 2.5, and 3.5 wt %) were prepared via in situ polymerization with a novel, bisupported Ziegler-Natta catalytic system. Magnesium ethoxide [Mg(OEt) 2] and surface-functionalized MWCNTs were used as the support of the catalyst. Titanium tetrachloride (TiCl 4) accompanied by triethylaluminum constituted the Ziegler-Natta catalytic system. Preparation of the catalyst and the polymerization were carried out in the slurry phase under an argon atmosphere. Support of the catalyst on the MWCNTs was investigated with Fourier transform... 

Multi wall carbon nanotube (MWCNT) doped ZnO nanofibers were fabricated by electrospinning for the first time. We have successfully demonstrated the photocatalytic activity of doped nanofibers under visible light. Scanning electron microscopy showed that the diameter of MWCNT-doped ZnO nanofibers varied from 120 to 300 nm without agglomeration of MWCNT. Fourier transform infrared spectroscopy and X-ray diffraction studies proved the formation of ZnO bond and wurtzite structure with smaller crystal size in doped nanofibers. Raman spectra demonstrated slight shift in bond position after nanofiber doping, indicating the chemical bond between MWCNT and ZnO. X-ray photoelectron spectroscopy... 

In this work successful synthesis of multiwall carbon nanotube (CNT) using solution combustion and chemical vapor deposition (CVD) methods are reported. Ceramic nanocomposite samples of (Al 2-xFe xO 3)-(y)ZrO 2 formula with x = 0.017, 0.034 and 0.17 and y = 0.15 were initially prepared. These were then subjected to CVD process during which the in situ reduction of iron oxide to metallic iron (Fe/Fe 3C) phase/s provided the necessary catalyst for the CNT formation. The formation of long flexible filaments with a smooth and regular surface bridging between alumina-zirconia (AZ) grains could be detected. The diameters of the formed filaments were in the range of ∼70 to ∼320 nm and length of the... 

A mixture of multi-walled carbon nanotube/graphite paste electrode modified with a salophen complex of cobalt was prepared and was applied for the study of the electrochemical behavior of 6-mercaptopurine (MP) using cyclic and differential pulse voltammetry (DPV). An excellent electrocatalytic activity toward the oxidation of MP was achieved, which led to a considerable lowering in the anodic overpotential and remarkable increase in the response sensitivity in comparison with unmodified electrode. Utilizing DPV method, a linear dynamic range of 1-100 μM with detection limit of 0.1 μM was obtained in phosphate buffer of pH 3.0. The electrochemical detection system was very stable, and the... 

The present work focused on the characterization of mechanical properties of novolac phenolic resin (PF) filled with two types of clays, including modified and unmodified ones, and multiwalled carbon nanotube (MWCNT). It was found that the solution mixing method is able to disperse the nanoparticles within the PF resin appropriately. It was also shown that the unmodified clay (Closite Na+) has the highest influence on the mechanical properties possibly due to the good level of dispersion as well as the good interfacial interaction. Theoretical analysis based on the rubber elasticity theory showed that the nanoparticles influence the evolution of crosslinking density and network structure  

A series of V2O5 catalysts supported on multiwall carbon nanotube (MWCNT), single wall carbon nanotube (SWCNT), and graphene were synthesized by hydrothermal and reflux methods for oxidative dehydrogenation of propane (ODHP) to propylene. The catalysts were characterized by techniques including the BET surface area measurements, XRD, FTIR, H2-TPR, NH3-TPD, FESEM, and UV-vis diffuse reflectance spectroscopy. The performance of the catalysts and the supports were subsequently examined in a fixed bed reactor. The main products were propylene, ethylene and CO x. The vanadium catalyst supported on graphene with C/V molar ratio of 1:1 synthesized through the hydrothermal method had the best... 

The Multi-walled carbon nanotube (MWCNT)/WO3 nanocomposite thin films with different MWCNT's weight percentages were prepared by sol-gel method as visible light induced photoanode in water splitting reaction. Weight percentage of MWCNT in the all nanocomposite thin films was confirmed by TGA/DSC analysis. According to XPS analysis, oxygenated groups at the surface of the MWCNT and stoichiometric formation of WO3 thin films were determined, while the crystalline structure of the nanocomposite samples was studied by XRD indicating (0 0 2) peak of MWCNT in the monoclinic phase of WO3. The influence of different weight percentage (wt%) of MWCNT on WO3 photoactivity showed that the electron... 

Low structure carbon black (CBN330), conductive high structure carbon black (CBXE2B) and carboxylated multiwalled carbon nanotube (MWCNT) were loaded into the blend of natural rubber (NR) and styrene butadiene rubber (SBR) at different contents up to 10 phr. Kraus plots showed that all the reinforcements interact with NR/SBR blend appropriately. However, the CBXE2B whose interfacial area is the highest showed greatest value of Kraus interaction parameter. Flory-Rhener model and effective torque value revealed that all of the reinforcements enhanced the crosslink density, among them CBXE2B showed the highest impact and MWCNT placed in the second rank. It was also shown that the cure kinetic... 

In the first stage, chitosan (CH)-hydroxyapatite (HA)-multiwalled carbon nanotube (MWCNT) composite coatings were synthesized by electrophoretic deposition technique (EPD) on 316L stainless steel substrates at different levels of pH and characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and field emission scanning electron microscopy (FESEM). A smooth distribution of HA and MWCNT particles in a chitosan matrix with strong interfacial bonding was obtained. In the next stage, effects of pH and MWCNT content of the suspension on the corrosion behavior and deposition mechanism were studied. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) curves... 

Poly(ethylene terephthalate) (PET) nanocomposites were prepared through a solution casting method using Multi wall carbon nanotubes (MWCNT) and organically modified montmorillonite (OMMT) as nanoparticles and their morphological and thermal properties investigated. The X-ray diffraction and transmission electron microscopy measurements showed that decreasing the ratio of MWCNT to OMMT for the same amount of OMMT creates better conditions for intercalation of PET macromolecules and promotes the transformation of OMMT nanostructures from the intercalated to exfoliated state. It was concluded that the Ozawa's model was not suitable to interpret the crystallization behavior of the... 

In the present research, the introduction of multi-walled carbon nanotubes (MWCNTs) into the hydroxyapatite (HA) matrix and dip coating of nanocomposite on titanium alloy (Ti-6Al-4V) plate was conducted in order to improve the performance of the HA-coated implant via the sol-gel method. The structural characterization and electron microscopy results confirmed well crystallized HA-MWCNT coating and homogenous dispersion of carbon nanotubes in the ceramic matrix at temperatures as low as 500 C. The evaluation of the mechanical properties of HA and HA/MWCNT composite coatings with different weight percentages of MWCNTs showed that the addition of low concentrations of MWCNTs (0.5 and 1 wt.%)... 

This article reports the first oil-absorbent cross-linked copolymer consisting of modified multiwalled carbon nanotube (MWCNT) and showing high oil absorbency. Also, to investigate and evaluate the effective parameters on oil absorbency, cross-linked dodecyl methacrylate (DDMA)-diphenylacrylamide (DPAA) and DDMA-butyl acrylate (BA) copolymers were synthesized. DDMA was copolymerized with different mol% of DPAA or BA and cross-linked using azobisisobutyronitrile as the initiator and various weight percentages of 1,4-butandiol dimethacrylate, methylene bisacrylamide, or vinyl group-modified MWCNT cross-linkers. The effects of monomer feed composition, cross-linker concentration, and the... 

A simple method for synthesis of novel organogels based on multiwalled carbon nanotubes (MWCNTs) is reported. Three classes of organogels were synthesized by crosslinking polymerization of dodecyl methacrylate with various weight percentages of 1,4-butanediol dimethacrylate, vinyl-group-modified MWCNTs or pristine MWCNTs in the presence of 2,2-azoisobutyronitrile as initiator. In this reaction, the carbon nanotubes (CNTs) served simultaneously as an adsorbent, a comonomer and a crosslinking agent. The oil-absorbent containing CNTs showed much higher swelling capacity in oil and organic solvents compared with that without CNTs. Therefore, CNT-based organogels can be introduced as a promising...