Sharif Digital Repository

Synthesis of polyvinyl pyrrolidone (PVP) coated ultrasmall Gd2O3 nanoparticles (NPs) with enhanced T1-weighted signal intensity and r2/r1 ratio close to unity is performed by a microwave-assisted polyol process. PVP coated Gd2O3NPs with spherical shape and uniform size of 2.5 ± 0.5 nm have been synthesized below 5 min and structure and morphology confirmed by HRTEM, XRD and FTIR. The longitudinal (r1) and transversal relaxation (r2) of Gd2O3NPs is measured by a 3 T MRI scanner. The results showed considerable increasing of relaxivity for Gd2O3NPs in... 

We report a study on chalcopyrite solar cells fabricated by low-cost, nonvacuum, and selenization-free methods. Superstrate-type CuInS2 (CIS) thin-film solar cells were prepared by sequential ink deposition. The CIS film was formed from a stable low-carbon ink, which was synthesized at low temperature (<120 °C). The CIS nanoparticle ink was prepared with n-butylamine and acetic acid as the solvent and stabilizer, respectively. The viscous and stable ink that formed through the dispersion of the final nanoparticles in N,N-dimethylformamide (DMF) could be deposited readily onto the substrate. The major features of the obtained ink are the small amount of impurity phases and negligible carbon... 

An analytical model based on cohesive energy has been conducted to study the effects of edge, corner, and inward surface relaxation as varying parameters on melting temperature of nanoparticles. It is shown that taking into account the edge and corner (EC) atoms of nanoparticle, causes to drop melting temperature more, when compared to consider them the same as only surface atoms. This reduction is significant especially when the size of nanoparticle is below 10 nm. The results are supported by available experimental results of tin, lead and gold melting temperature (Tm). Finally, it is shown that inward relaxation increases melting temperature slightly  

We report a simple and inexpensive synthesis route of TiO2 nanoparticles using electrical arc discharge between titanium electrodes in oxygen bubbled deionized (DI) water followed by heat treatment. The resulting nanoparticles were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). XRD patterns demonstrate formation of TiO2 phase in oxygen bubbled water after heat treatment and dominance of rutile to anatase phase. The size and morphology of TiO2 nanoparticles were studied using different arc currents as a crucial parameter in properties of final... 

The electrochemical behavior of the anti-inflammatory drug piroxicam is studied at the surface of a plain pyrolytic graphite electrode modified with chitosan-doped carbon nanoparticles. An electroactive surface was produced by drop-casting a suspension of the modifier and characterized by atomic force microscopy. A remarkable enhancement is found in studies on the cyclic voltammetric response towards piroxicam. This is described on the basis of the thin-layer mass transport regimes within the porous films, which leads to a considerable increase in the active surface area of the electrode. The electrode shows a linear response to piroxicam in the range of 0.05-50 μM, with a detection limit of... 

A simple and effective procedure is proposed for spectrophotometric determination of catecholamines; Dopamine (1), L-Dopa (2) and Adrenaline (3). It was found that the reduction of Ag+ to silver nanoparticles (Ag-NPs) by these catecholamines in the presence of polyvinylpyrrolidone (PVP) as a stabilizing agent produced very intense surface plasmon resonance peak of Ag-NPs. The plasmon absorbance of the Ag-NPs allows the quantitative spectrophotometric detection of the catecholamines. The calibration curves derived from the changes in absorbance at λ = 440 nm were linear with concentration of Dopamine, Levodopa and Adrenaline in the range of 3.2×10-6- 2.0x10-5 M, 1.6x10-7 - 1.0×10-5 M,... 

Superparamagnetic iron oxide nanoparticles (SPIONs) are promising materials for various biomedical applications including targeted drug delivery and imaging, hyperthermia, magneto-transfections, gene therapy, stem cell tracking, molecular/cellular tracking, magnetic separation technologies (e.g. rapid DNA sequencing), and detection of liver and lymph node metastases. The most recent applications for SPIONs for early detection of inflammatory, cancer, diabetes and atherosclerosis have also increased their popularity in academia. In order to increase the efficacy of SPIONs in the desired applications, especial surface coating/characteristics are required. The aim of this article is to review... 

Superparamagnetic iron oxide nanoparticles (SPIONs) are promising materials for various biomedical applications including targeted drug delivery and imaging, hyperthermia, magneto-transfections, gene therapy, stem cell tracking, molecular/cellular tracking, magnetic separation technologies (e.g. rapid DNA sequencing), and detection of liver and lymph node metastases. The most recent applications for SPIONs for early detection of inflammatory, cancer, diabetes and atherosclerosis have also increased their popularity in academia. In order to increase the efficacy of SPIONs in the desired applications, especial surface coating/characteristics are required. The aim of this article is to review... 

In the present paper, the use of a novel carbon paste electrode modified by N,N'(2,3-dihydroxybenzylidene)-1,4-phenylenediamine (DHBPD) and TiO2 nanoparticles prepared by a simple and rapid method for the determination of dopamine (DA) was described. In the first part of the work, cyclic voltammetry was used to investigate the redox properties of this modified electrode at various solution pH values and at various scan rates. A linear segment was found with slope value of about 48 mV/pH in the pH range 2.0 -12.0. The apparent charge transfer rate constant (ks) and transfer coefficient (α) for electron transfer between DHBPD and TiO2 nanoparticles-carbon paste electrode were calculated. In... 

A carbon paste electrode (CPE), modified with novel hydroquinone/TiO2 nanoparticles, was designed and used for simultaneous determination of ascorbic acid (AA), uric acid (UA) and folic acid (FA). The magnitude of the peak current for modified TiO2-nanoparticle CPE (MTNCPE) increased sharply in the presence of ascorbic acid and was proportional to its concentration. A dynamic range of 1.0-1400.0 μM, with the detection limit of 6.4x10-7M for AA, was obtained using the DPV technique (pH=7.0). The prepared electrode was successfully applied for the determination of AA, UA, and FA in real samples  

To study the effect of size and shape of metallic nanoparticle on their Curie temperature, an analytical model is proposed. The core average coordination number (CAC) and surface average coordination number (SAC) of freestanding nanoparticles are considered in the model. Clusters of icosahedral (IC) and body centred cubic (BCC) structure without any vacancies and defects are modelled. A critical Curie temperature is introduced for metallic clusters with a diameter of 2-3 nm. This critical diameter is related to clusters which the ratio of surface atoms to total atoms is about 50%. The "shape effect" is shown to be important at sizes less than 20 nm. The obtained results are supported by... 

The study of the surface free energy (SFE) of metal at nanoscale is far from perfection and the obtained results are approach dependent. Despite the extensive investigations, there is still a lack of a complete model for the surface energy of metallic nanoparticles which could be able to consider effects of the particle size and shape. Most studies emphasize the size dependence of the melting characteristics, rather than considering the lattice deformation and the surface energy of nanoclusters. This research aimed at computation of SFE of copper nanoclusters depending on temperature over a wide range of sizes, containing 147 to 10179 atoms. We employed molecular dynamics simulation by using... 

Synthesis of highly-pure tetragonal perovskite nanocrystals is the key challenge facing the development of new electronic devices. Our results have indicated that ultrasonication is able in enhancing the formation of tetragonal phase in perovskite nanocrystals. In the current research, multicationic oxide perovskite (ATiO3; A: Ba, Sr, Ba0.6Sr0.4) nanopowders are synthesized successfully by a general methodology without a calcination step. The method is able to synthesize high-purity nanoscale ATiO3 (BaTiO3, SrTiO3, Ba0.6Sr0.4TiO3) with tetragonal symmetry at a lower temperature and in a shorter time span in contrast to the literature. To reach an in-depth understanding of the scientific... 

Nickel ferrite nanoparticle is a soft magnetic material whose appealing properties as well as various technical applications have rendered it as one of the most attractive class of materials; its technical applications range from its utility as a sensor and catalyst to its utility in biomedical processes. The present paper focuses first on the synthesis of NiFe2O4 nanoparticles through co-precipitation method resulting in calcined nanoparticles that were achieved at different times and at a constant temperature (773 k). Afterward, they were dispersed in water that was mixed by chitosan. Chitosan was bonded on the surface of nanoparticles by controlling the pH of media. In order to assess the... 

In this research, ball milling of magnesium fillings with NaCl, KCl and urea was investigated as a simple way to produce Mg nanoparticles. Effects of feed geometry and milling time on crush mechanism and product size were determined. Optical, scanning and transmission electron microscopes were used to study the morphology of the products. Spherical charge particles were milled under argon atmosphere with 10 wt% cuboidal NaCl at 250 rpm for 50 h. With ball to powder ratio of 10:1, the average diameter of the product was 17 nm. Addition of NaCl changed the breakage mechanism from ductile–ductile to ductile–brittle, reduced particle size, stopped agglomeration and prevented the undesirable... 

In self-controlling hyperthermia therapy, once the desired temperature is reached, the heat generation ceases and overheating is prevented. In order to design a system that generates sufficient heat without thermal ablation of surrounding healthy tissue, a good understanding of temperature distribution and its change with time is imperative. This study is conducted to extend our understanding about the heat generation and transfer, temperature distribution and temperature rise pattern in the tumor and surrounding tissue during self-controlling magnetic hyperthermia. A model consisting of two concentric spheres that represents the tumor and its surrounding tissue is considered and temperature... 

A heterogeneous nanocatalyst was prepared via covalent anchoring of dioxomolybdenum(VI) Schiff base complex on core-shell structured Fe3O4@SiO2. The properties and the nature of the surface-fixed complex have been identified by a series of characterization techniques such as SEM, EDX, XRD, TGA, FT-IR, and VSM. The synthesized hybrid material was an efficient nanocatalyst for selective oxidation of olefins to corresponding epoxides with t-BuOOH in high yields and selectivity. The catalyst could be conveniently recovered by applying an external magnetic field and reused several times without significant loss of efficiency. © 2016 Taylor and Francis  

Abstract original image Smart Enhanced Oil Recovery Process using Core–Shell Nanoparticles: The cover image denotes schematically the enhanced oil recovery process by flooding using an aqueous dispersion of core–shell nanoparticles made up of protected polyacrylamide nanostructures (PPNs). Y. Tamsilian and his colleagues at Sharif University of Technology (Iran) and the Institute for Polymer Material (POLYMAT, Spain) demonstrated the synthesis of polyacrylamide nanoparticles protected with a hydrophobic polystyrene shell by using a one-pot, two-step inverse emulsion polymerization technique, where the polystyrene shell was created by surface polymerization. The presence of the hydrophobic... 

Biodegradable chitosan nanoparticles (CSNPs) with an intrinsic antimicrobial activity may be a good choice to improve the effectiveness of antimicrobial photodynamic inactivation (APDI). The aim of this study was to investigate the effect of CSNPs on the efficiency of methylene blue (MB)-mediated APDI of Staphylococcus aureus and Pseudomonas aeruginosa biofilms. We also assessed the phototoxicity of MB + CSNPs towards human fibroblasts. Methods: CSNPs were prepared using ionic gelation method and characterized by dynamic light scattering (DLS) and field-emission scanning electron microscope (FESEM). Biofilms were developed in a 96-well polystyrene plate for 24 h. In vitro phototoxic effect... 

Control over the wettability of reservoir rocks is of crucial importance for enhancing oil and gas recovery. In order to develop chemicals for controlling the wettability of reservoir rocks, we present a study of functionalized silica nanoparticles as candidates for wettability alteration and improved gas recovery applications. In this paper, properties of fluorinated silica nanoparticles were investigated in water or decane-loaded pores of mineral silica using molecular dynamics simulation. Trifluoromethyl groups as water and oil repellents were placed on the nanoparticles. Simulating a pore in the presence of trapped water or decane molecules leads to liquid bridging for both of the...