Sharif Digital Repository

In the bone tissue engineering field (BTE), it is of significant importance to develop bioactive multifunctional scaffolds with enhanced osteoconductivity, osteoinductivity, and antibacterial properties required for lost bone tissue regeneration. In this work, a bioactive glass-ceramic scaffold was manufactured via a novel polymer-derived ceramics (PDC) manufacturing method. To gain antibacterial properties, the silver ions were incorporated in controlled amount along with other precursors in the PDC processing stage. Microstructural and structural properties of the fabricated silicate-phosphate glass-ceramic scaffold were evaluated by scanning electron microscopy (SEM) equipped with energy... 

Introduction: Diabetic neuropathy is a common complication of diabetes mellitus. It is associated with nerve damage due to oxidative stress and high levels of pro-inflammatory mediators. In the present study, we examined the anti-nociceptive effects of Fullerene nanoparticle, as a potent anti-oxidant, during diabetic neuropathy. Methods: Diabetes mellitus induced through injection of streptozotocin (STZ) (40 mg/kg). Four groups were used in the study as follows: the control, control+fullerene, diabetes, and diabetes +fullerene groups. All four groups received sesame oil. Treatment rats received fullerene C60 (1mg/kg/day) for 9 weeks by intra-gastric gavage. Then, cold allodynia, histology,... 

Exploiting localized heat-generation density and the resulting enhanced temperature-rise for controlled growth of carbon nanotubes (CNTs) is reported, and its potentials for batch-production of high-quality CNT probes are demonstrated. Optical near field chemical vapor deposition (ONF-CVD) benchtop fabrication schemes are developed for the localized integration of individual well-aligned carbon nanotubes without bending/buckling exactly at desired nanoscale sites. It is demonstrated that generating self-aligned catalyst nanoparticles superimposed on top of silicon nanotips, along with near-field induced absorption confinement, provide the ability to localize the generated heat at the... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

Myocardial infarction is a major cause of death worldwide and remains a social and healthcare burden. Injectable hydrogels with the ability to locally deliver drugs or cells to the damaged area can revolutionize the treatment of heart diseases. Herein, we formulate a thermo-responsive and injectable hydrogel based on conjugated chitosan/poloxamers for cardiac repair. To tailor the mechanical properties and electrical signal transmission, gold nanoparticles (AuNPs) with an average diameter of 50 nm were physically bonded to oxidized bacterial nanocellulose fibers (OBC) and added to the thermosensitive hydrogel at the ratio of 1% w/v. The prepared hydrogels have a porous structure with open... 

Here we report on the development of a hybrid nanofibrous scaffold made from polyvinylidene fluoride (PVDF) nanofibers embedding zinc oxide nanorods (ZnOns), and poly(ε-caprolactone) (PCL) nanofibers incorporating dexamethasone (DEX)-loaded chitosan nanoparticles using dual-electrospinning method. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and tensile analysis were carried out for physiochemical characterization of the scaffolds, followed by DEX release profile. In addition, an MTT assay was conducted to assess the viability of mouse bone marrow-derived mesenchymal stem cells (mBMSCs) on the hybrid nanofibrous scaffold.... 

In this research study, interfacial assembled nanoporous zeolitic imidazolate framework (ZIF-8) multiwalled oxidized carbon nanotubes (MW-OCNTs) were developed and introduced into a silane coating. To analyze the destructive behavior of the nanoparticles exposed to salty solutions with three distinctive pHs of 2, 7.5, and 12, various types of tests such as X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and inductively coupled plasma (ICP) were accomplished. The XRD test revealed that the main characteristic peaks of ZIF-8 were eliminated and/or their intensity decreased. In accordance with the obtained data from the XRD test, nanoparticles at pH = 2 had been... 

Hybrid nanofluids are new and most fascinating types of fluids that involve superior thermal characteristics. These fluids exhibit better heat-transfer performance as equated to conventional fluids. Our concern, in this paper, is to numerically interpret the kerosene oil-based hybrid nanofluids comprising dissimilar nanoparticles like silver (Ag) and manganese zinc ferrite (MnZnFe2O4). A numerical algorithm, which is mainly based on finite difference discretization, is developed to find the numerical solution of the problem. A numerical comparison appraises the efficiency of this algorithm. The effects of physical parameters are examined via the graphical representations in either case of... 

In this study, an attempt has been made to fabricate Cu-SiC nanocomposites by flake powder metallurgy and high-pressure torsion processing techniques at room temperature. Pure Cu and a mixture of Cu and nano-sized SiC powders were mechanically milled separately for 3 h and then green compacts were prepared by uniaxial pressing under 1 GPa pressure. The green compacts experienced 6-turn high-pressure torsion under a pressure of 6 GPa to prepare bulk Cu and Cu-SiC samples. The microstructures of the consolidated samples were characterized using an X-ray diffractometer and a high resolution scanning/transmission electron microscope, and the mechanical properties were evaluated by microhardness,... 

In the present study, first, Fe3O4nanoparticles were functionalized using glutaric acid and then composited with CQDs. Doxorubicin (DOX) drug was loaded to evaluate the performance of the nanocomposite for targeted drug delivery applications. The XRD pattern confirmed the presence of characteristic peaks of CQDs and Fe3O4. In the FTIR spectrum, the presence of carboxyl functional groups on Fe3O4/CQDs was observed; DOX (positive charge) is loaded onto Fe3O4/CQDs (negative charge) by electrostatic absorption. FESEM and AFM images showed that the particle sizes of Fe3O4and CQDs were 23-75 and 1-3 nm, respectively. The hysteresis curves showed superparamagnetic properties for Fe3O4and Fe3O4/CQDs... 

The exploitation of solar energy facilitates the renewable energy paradigm. In this regard, parabolic trough collectors (PTC) are considered as a useful set-up to absorb solar energy. Simultaneous study of thermal, thermodynamic, and exergoeconomic performance of PTC systems paves the way for designers and manufacturers to not only have a better insight into understanding the underlying concepts about the operation of PTC systems but also to find the most effective and cost-effective circumstances. This study aims at analyzing a practical PTC system by considering an evacuated absorber tube with glass cover, non-uniform heat flux, and taking into account the convective and radiative heat... 

The features of heat transferral capability between metallic (Cu) and non-metallic (TiO2) nanoparticles suspended in the engine-oil (EO) third-grade base-liquid has been analysed under the influence of strong magnetic field. The numerical investigation of system of coupled differential equations for third-grade nanofluid flow model is accomplished via Quasi-linearization method (QLM). The stretching horizontal sheet is heated through convective heat process assuming the special effects of thermal radiation, joule heating, heat generation and viscous dissipation in the energy equation. The mass suction and slip velocity at the boundary of the sheet has been taken into account to enhance... 

Iron oxyhydroxide (α-FeOOH, Goethite) is one of the most thermodynamically stable iron oxides and a widespread soil mineral. In this study, a mixture of two phenolic extracts of rosemary and Echinacea was utilized as stabilizing and reducing agents for the synthesis of Goethite (FeOOH) nanoparticles without utilizing harmful toxic solvents. The resulting nanoparticles were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM)-energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), vibrating-sample magnetometer (VSM), thermogravimetry/differential thermal analysis (TG/DTA), and Brunauer–Emmett-Teller (BET). MTT assay was... 

Molecular imaging (MI) can provide not only structural images utilizing temporal imaging techniques, but also functional and molecular data using a variety of newly developed imaging techniques. Nanotechnology’s application in MI has commanded a lot of attention in recent decades, and it has provided tremendous potential for imaging living subjects. In this study, D-glucosamine conjugated functionalized magnetic iron oxide nanoparticles (Fe3O4-PEG-DG NPs) were prepared and studied as magnetic resonance imaging (MRI) contrast agents. To evaluate their distribution, single-photon emission computed tomography (SPECT) is performed. Fe3O4 NPs are made using a well-known co-precipitation process... 

In this work, a green synthesis method was designed and practiced to develop bioactive and biocompatible carbon-based nanocomposites biomaterials. ZnO nanoparticles were synthesized in assistance of leaf extracts and added to a composite nanostructure composed of the reduced graphene oxide (rGO) and multi-walled carbon nanotubes (MWCNT). The resulting green nanocomposite revealed ability to make π-π interactions, hydrogen bonding, and van der Waals interactions with the doxorubicin (DOX). Then, the surface morphology of the synthesized nanocomposite was investigated, and the interrelationship between the surface morphology, relative cell viability, and drug uptake and release behavior were... 

Polysaccharides (PSA) have taken specific position among biomaterials for advanced applications in medicine. Nevertheless, poor mechanical properties are known as the main drawback of PSA, which highlights the need for PSA modification. Nanocomposites PSA (NPSA) are a class of biomaterials widely used as biomedical platforms, but despite their importance and worldwide use, they have not been reviewed. Herein, we critically reviewed the application of NPSA by categorizing them into generic and advanced application realms. First, the application of NPSA as drug and gene delivery systems, along with their role in the field as an antibacterial platform and hemostasis agent is discussed. Then,... 

Given the growing need for renewable energy and related technologies, researches have shifted to develop low-cost, stable, high-efficiency electrocatalysts in clean energy generation reactions such as water electrolysis. In the present paper, a three-dimensional Fe2TiO5/nitrogen-doped graphene (3D FTO/NG) nanocomposite is prepared using a simple, cheap and fast method, called chemical bath deposition (CBD). Structural and physical characterizations of the prepared electrocatalysts are performed by different methods such as Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray spectroscopy (EDX), Fourier Transform InfraRed spectra (FT-IR), Dynamic Light Scattering... 

A novel photolithography-based technique was developed to fabricate a quasi-2D heterogeneous calcite micromodel of representative elementary volume size. The effect of brine-chemistry on the mobilization of capillarity and heterogeneity trapped oil after high salinity water injection was evaluated by using diluted seawater, and seawater modified with calcium, sulphate, and silica nanoparticles. Preliminary brine screening was performed based on modified contact angle experiments under dynamic salinity alteration. The main findings are that the chemical composition of brine impacts both the ultimate oil recovery and its speed. The highest and fastest oil recovery was obtained with diluted... 

Co–Zr doped Ni ferrite substituted polyaniline (PANI) nanocomposites were prepared using polymerization reaction method. NiFeCo0.5Zr0.5O4 with 12.5%, 25%, 37.5% and 50% PANI (A1, A2, A3 and A4) were used to obtain better photocatalytic efficiency. XRD, UV/VIS, BET, and FESEM were employed to characterize the PANI/ferrite nanocomposites. The effect of reaction time and nanoparticle concentrations on the photocatalytic degradation were thoroughly evaluated. XRD analysis confirmed the phase of NiFeCo0·5Zr0·5O4ferrite, while FESEM analysis was performed to investigate the surface morphology of the nanocomposites. The crystallinity was increased with the Co–Zr doped Ni ferrite contents in the... 

The controlled and stable crystal structure, reduction in Curie temperature and semiconducting nature of oxide materials are the key factors for magnetoelectrical applications. Therefore, Co0.6Mn0.4GdxFe2-xO4 where x = 0, 0.033, 0.066 and 0.10 were synthesized to analyse the structural, morphological, magnetic, and electrical properties using a sol-gel autocombustion approach. The X-ray diffraction pattern reveals that the cubic crystallite size decreases with increasing smaller content of Gd3+ oxides without any secondary phase. Field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HR-TEM) study explain the complete morphology,...