Sharif Digital Repository

Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles, and for creating internal profiles in tubes. Due to very large forging loads, the tool should withstand high stress and wear. Therefore, the success of the forging process depends upon recognition of the die failure factors and optimization of the tool working conditions that enhance tool life. In this study, the effect of process parameters on tool life in the cold radial forging process is investigated using nonlinear three dimensional finite element modeling. Wear and mechanical fatigue are considered as the main modes of tool failure, and a parametric study on the... 

A new design for a valveless micropumping device has been proposed that integrates two existing pumping technologies, namely, the wall induced traveling wave and the obstacle-type valveless micropump. The liquid in the microchannel is transported by generating a traveling wave on the channel, while the placing of two asymmetric trapezoid obstacles, along the centerline of the channel inlet and outlet, leads to a significant (up to seven times) increase of the net flow rate of the device. The effectiveness of this innovative design has been proved through a verified three-dimensional finite element model. FluidStructure Interaction (FSI) analysis is performed in the framework of an Arbitrary... 

The accuracy of five soft computing techniques was assessed for the prediction of monthly streamflow of the Gilgit river basin by a cross-validation method. The five techniques assessed were the feed-forward neural network (FFNN), the radial basis neural network (RBNN), the generalised regression neural network (GRNN), the adaptive neuro fuzzy inference system with grid partition (Anfis-GP) and the adaptive neuro fuzzy inference system with subtractive clustering (Anfis-SC). The interaction between temperature and streamflow was considered in the study. Two statistical indexes, mean square error (MSE) and coefficient of determination (R2), were used to evaluate the performances of the... 

Design of an appropriate ventilation system is one of the main concerns in the construction of subways. In this paper, thermal comforts of side-platform stations are investigated by numerical methods. For the numerical simulation, grids are generated by structured methods and governing equations are discretized by finite volume methods. In the numerical simulation, second order upwind and second order central difference scheme are used to consider the convection and diffusion terms of momentum and energy equations, respectively. Results of this study show that in term of thermal comfort, region next to the hallway and the middle part of the platform is the worst zones of the station. In... 

In case of unexpected ruptures in high pressure tanks, choking phenomenon occurs in the cracked area which fluid velocity gets sonic and its pressure exceeds atmospheric pressure. Afterward, pressure of discharged gas quickly changes by crossing through compression and expansion shock waves. The main aim of this study was numerical simulation and investigation of this flow in a 3-step process: (a) Detailed analysis of numerical method, (b) Qualitative and quantitative analysis of velocity, pressure, temperature and turbulence intensity, in order to propose safety strategies and (c) parametric studies on the effects of tank pressure and nozzle geometry on flow structure. In numerical... 

The nonlinear equation of motion for pre-stretched EulerBernoulli beams is derived. The effect of pre-tension and pre-compression in EulerBernoulli beams is studied. It is shown that compressive strain affects the bending stiffness much more than tensile strain. Based on the derived equation, the dynamic model of bimorph piezo-actuated beams, which is accurate, yet simple, is then developed. Afterwards, the critical voltage, which makes the piezo-actuated microbeam unstable, is numerically investigated. It is shown that the strain of the centerline is proportional to the beam's aspect ratio squared. Results show that the more the aspect ratio, the less the critical voltage. In addition, it... 

Comprehensive numerical analyses are conducted to simulate and capture “Buzz” phenomenon in a supersonic mixed compression air inlet. The buzz is an unsteady self-sustained feature that occurs in supersonic inlets, especially when operating in their subcritical condition. In such a situation, the shock waves oscillate along the inlet and cause mass flow fluctuations inside the inlet that will deteriorate the engine performance significantly. An axisymmetric unsteady numerical simulation was used to solve the Navier–Stokes equations combined with the URANS SST k–ω turbulence model. The simulations for two different free-stream Mach numbers of M∞=2.0 and 2.2 and at two specific subcritical... 

This investigation is devoted to the influences of non-uniform wall characteristics on the surface adsorption-desorption rates in an electrokinetic microarray. Utilizing already explored electroosmotic and electrophoretic velocities, the species transport equations are solved by a finite-volume-based numerical approach. Uniform, sinusoidal, and pulse-like distributions of the zeta potential are considered in the analysis. The developed model is validated by comparing the results with those of two analytical solutions that are derived for limiting conditions. The results reveal that, in some cases, the surface charge heterogeneity can reduce the saturation time by more than 60%. The efficacy... 

This investigation is devoted to the influences of non-uniform wall characteristics on the surface adsorption-desorption rates in an electrokinetic microarray. Utilizing already explored electroosmotic and electrophoretic velocities, the species transport equations are solved by a finite-volume-based numerical approach. Uniform, sinusoidal, and pulse-like distributions of the zeta potential are considered in the analysis. The developed model is validated by comparing the results with those of two analytical solutions that are derived for limiting conditions. The results reveal that, in some cases, the surface charge heterogeneity can reduce the saturation time by more than 60%. The efficacy... 

In this study, a well-known Computational Fluid Dynamics software, so-called Fire Dynamics Simulator (FDS), has been used to simulate multiple ethanol pool fire scenarios. Influences and reciprocal impacts in terms of dynamics and growth of the pool fires have been investigated. Heat release rates temperature and flame shapes have been monitored as the main outputs of the simulations. Based on the simulation results, it can be concluded that the amounts of mass burning rate, the radiation energy and the pool fire flame height were significantly higher in multiple pool fires, when compared with the theoretical values obtained by the mere summation of single pool fires. Furthermore, the... 

The aim of the present study is to provide an Atlas of IRAN Offshore Renewable Energy Resources (hereafter called 'the Atlas') to map out wave and tidal resources at a national scale, extending over the area of the Persian Gulf and Sea of Oman. Such an Atlas can provide necessary tools to identify the areas with greatest resource potential and within reach of present technology development. To estimate available tidal energy resources at the site, a two-dimensional tidally driven hydrodynamic numerical model of Persian Gulf was developed using the hydrodynamic model in the MIKE 21 Flow Model (MIKE 21HD), with validation using tidal elevation measurements and tidal stream diamonds from... 

The most suitable and widely used numerical integration method for boundary integrals in the BEM method is Gauss-Legendre integration. But, this integration method is not appropriate for singular and nearly singular integrations in BEM. In this study, some criteria are introduced for recognizing nearly singular integrals in the integral form of the Laplace equation. At the first stage, a criterion is obtained for the constant element and, at the later stages, higher order elements are investigated. In the present research, the Romberg integration method is used for nearly singular integrals. The results of this numerical method have good agreement with analytical integration. The singular... 

The main objective of the present study was to develop a valid and appropriate model to evaluate companies' efficiency and environmental performance, concerning health, safety, and environmental management system principles. The proposed model overcomes the shortcomings of the previous models developed in this area. This model has been designed on the basis of a mathematical method known as Data Envelopment Analysis (DEA). In order to differentiate high-performing companies from weak ones, one of DEA nonradial models named as enhanced Russell graph efficiency measure has been applied. Since some of the environmental performance indicators cannot be controlled by companies' managers, it was... 

The first notable megawatt class wind turbine, which was the pioneer of improvement in the blade performance in large wind turbines, appeared in Vermont. Nowadays, modern wind turbines are using blades with multi-airfoils at different sections. In this study, in order to indicate the best airfoil profile for the optimum performance in different sections of a blade, five popular airfoils, including S8xx, FFA and AH series, were studied. On the large-scale profile, shear stress transport K–ω model was applied for the simulation of horizontal axis wind turbines for different wind speeds. The aerodynamic simulation was accomplished using computational fluid dynamic method, which in turn is based... 

This study aims at identifying the parameters that govern the environmental costs in oil and gas projects. An initial conceptual model was proposed. Next, the costs of environmental management work packages were estimated, separately and were applied in project control tools (WBS/CBS). Then, an environmental parametric cost model was designed to determine the environmental costs and relevant weighting factors. The suggested model can be considered as an innovative approach to designate the environmental indicators in oil and gas projects. The validity of variables was investigated based on Delphi method. The results indicated that the project environmental management's weighting factor is... 

Urban transportation is one of the main sources of air pollution in mega cities, and urban job related trips can effectively influence the state of air quality. Tehran, the capital of Iran, with a population of 7.3 million, was selected for this study. The present model is designed to investigate the effect on traffic of the business working hours of different occupations and, as a result, on the status of air pollution. Daily job, non-job and recreational trips using the present vehicle fleet is a major factor affecting air pollution in Tehran. In the context of the present study, the necessary information was utilized to define some relations between job trips and pollutant emissions. The... 

An unstructured grid, finite-volume, and three-dimensional (3D) primitive equation ocean model has been developed to predict oceanic pollutant dispersions in depth and surface of the Caspian Sea for non-chemical reactions of dissolved constituents. The model consists of momentum, continuity, temperature, salinity, and density equations. Physical and mathematical closure has been achieved using Mellor and Yamada turbulent closure sub-models. Since determining a practical definition of salinity that enjoys acceptable accuracy is difficult; therefore, various definitions have been used in this work. A recent definition of salinity stated in the UNESCO Practical Salinity Scale of 1978, PSS78,... 

A downscaling model capable of explaining the temporal and spatial variability of regional hydroclimatic variables is essential for reliable climate change studies and impact assessments. This study proposes a novel statistical approach based on generalized hierarchical linear model (GHLM) to downscale precipitation from the outputs of general circulation models (GCMs) at multiple sites. GHLM partitions the total variance of precipitation into within- and between-site variability allowing for transferring information between sites to develop a regional downscaling model. The methodology is demonstrated by downscaling precipitation using the outputs of eight GCMs in Lake Urmia basin in... 

General Circulation Models (GCMs) are advanced tools for impact assessment and climate change studies. Previous studies show that the performance of the GCMs in simulating climate variables varies significantly over different regions. This study intends to evaluate the performance of the Coupled Model Intercomparison Project phase 5 (CMIP5) GCMs in simulating temperature and precipitation over Iran. Simulations from 37 GCMs and observations from the Climatic Research Unit (CRU) were obtained for the period of 1901–2005. Six measures of performance including mean bias, root mean square error (RMSE), Nash-Sutcliffe efficiency (NSE), linear correlation coefficient (r), Kolmogorov-Smirnov... 

General Circulation Models (GCMs) are advanced tools for impact assessment and climate change studies. Previous studies show that the performance of the GCMs in simulating climate variables varies significantly over different regions. This study intends to evaluate the performance of the Coupled Model Intercomparison Project phase 5 (CMIP5) GCMs in simulating temperature and precipitation over Iran. Simulations from 37 GCMs and observations from the Climatic Research Unit (CRU) were obtained for the period of 1901–2005. Six measures of performance including mean bias, root mean square error (RMSE), Nash-Sutcliffe efficiency (NSE), linear correlation coefficient (r), Kolmogorov-Smirnov...