Sharif Digital Repository

This study investigates optimal strategies for price, warranty length, and production rate of a new product in which both static markets for non-durable and dynamic markets for durable products are involved. The mathematical model incorporates both the demand and the cost functions including production, warranty length, and inventory costs. Using the maximum principle approach, the optimal strategies and interactions among price, warranty length, and production rate in both markets are analyzed using some propositions. The analysis shows that to maximize profits in all cases, the price, the warranty length, and the production rate all must go up simultaneously, or one of them must increase... 

The drift spectrum, as a new measure of earthquake-induced demands in structures, was developed using a uniform-stiffness continuous beam model. Practical limitations in the procedures based on such models have caused structural engineers to pay little attention to drift spectra. In this paper, a method is proposed to estimate the seismic-induced inter-story drift demands, using the modal analysis technique of lumped mass, non-uniform beam models. The proposed approach is simple and can overcome many deficiencies of the previous methods. It can take into account the very important effect of height-wise stiffness reduction on drift demands, without the numerical difficulties usually... 

Asphaltic concrete has been used as waterproofing core in embankment dams, since 1948. In this application, the asphaltic core is surrounded by granular filter materials. The interaction of the asphaltic concrete and the granular materials has not been sufficiently investigated. In this paper the mechanical behavior of the interface between a natural smooth sand filter and asphaltic concrete at different levels of normal stresses and a constant shear strain rate has been studied. Small scale direct shear test has been conducted in this study, in which the shear surface is considered as the interface. Asphalt concrete specimens used in the shear test were cut in square shape (10×10×2.5 cm)... 

The major source of energy is fossil fuels, known as hydrocarbon containing C and H as the main elements. The heat generated from combustion of these fuels is used in power generation cycles to generate electricity. Main products of a hydrocarbon combustion reaction are water and carbon dioxide, but due to some reasons such as excessive temperature and inappropriate air-fuel mixing, always some pollutants are formed. One of the major concerns of recent years are NOx pollutants, which is mostly generated in the high temperature combustions. According to the geographical and economic issues, most countries are using coal as fuel and many researches have been conducted about pollutant formation... 

This paper presents a novel model for designing a reliable network of facilities in closed-loop supply chain under uncertainty. For this purpose, a bi-objective mathematical programming formulation is developed which minimizes the total costs and the expected transportation costs after failures of facilities of a logistics network. To solve the model, a new hybrid solution methodology is introduced by combining robust optimization approach, queuing theory and fuzzy multi-objective programming. Computational experiments are provided for a number of test problems using a realistic network instance  

Finding special periodic orbit in the highly chaotic problems is very complicated. Thus, deriving an effective algorithm for finding such orbits is important. In this paper, the spatial orbits in three-body problems are studied. Then, an algorithm is derived in order to help to find these orbits. This algorithm includes scanning the space, refining better points, and finally, minimizing the position error of the orbit by means of numerical methods  

In this work a double step algorithm is presented for the integration of equations governing the behavior of von Mises material in plastic limit. The isotropic and kinematic hardenings employed are of general type and the evolution of back stress follows the Armstrong-Frederick rule. Theoretical and numerical aspects are discussed in detail and a comparison is made with the classical backward Euler method  

Accurate prediction of static and dynamic response of nano structures under external excitations has been one of the interests of scientists in the last decade. Several applications of nano machines make it necessary to analyze their components, such as nano bearing, precisely. In this paper, the static and vibrational behavior of a fullerene as a sensitive part of nano bearing under external forces is simulated by a newly designed spherical super element. This super element is designed in such a way that the user can select as many numbers of nodes as desired, so that it can be implemented in different desired precisions. In this study, a 228-node super element, which is similar to a hollow... 

In this paper, we consider the restricted version of the well-known 2D line simplification problem under area measures and for restricted version. We first propose a unified definition for both of sum-area and difference-area measures that can be used on a general path of n vertices. The optimal simplification runs in O(n 3) under both of these measures. Under sum-area measure and for a realistic input path, we propose an approximation algorithm of O n2 time complexity to find a simplification of the input path, where is the absolute error of this algorithm compared to the optimal solution. Furthermore, for difference-area measure, we present an algorithm that finds the optimal... 

Although demand response (DR) potentially brings miscellaneous advantages, it is currently faced with challenges in its implementation due to customers' difficulty in manually responding to the time-varying prices. This paper presents an optimal and automatic residential load commitment (LC) framework to achieve the household minimum payment. Problem decision variables are the operating status of responsive appliances and charging/discharging cycles of battery storage and plug-in hybrid electric vehicles (PHEVs). Storage capability in residential centers provide the customers with this opportunity to not only supply the local demand during the high price hours but also sell the energy back... 

Liquefaction-induced lateral spreading has imposed severe damages to many important structures supported on pile foundations during past earthquakes. As a result, evaluation of pile response to lateral spreading is an important step towards safe and resistant design of pile foundations against this destructive phenomenon. Current paper aims to study the response of a group of piles subjected to liquefaction-induced lateral spreading using a large scale 1-g shake table test. General test results including time-histories of accelerations, pore water pressures, displacements and bending moments are presented and discussed in this paper. In addition, distribution of lateral soil pressure on... 

The solubility of acetaminophen in SuperCritical-Carbon Dioxide (SC- CO 2) with and without menthol as a cosolvent was measured at various temperatures (313, 328 and 343) K, and within pressures ranging from (10 to 25) MPa. It should be stated that the cosolvent, menthol, has chiral isomers with different melting points. Therefore, the effects of both menthol (I) with a lower melting point and menthol (II) with a higher melting point, as cosolvents on the solubility of acetaminophen in SC- CO 2, were studied. The experimental data collected in this work were obtained using a static flow apparatus. The experiments were replicated at least three times and the data reported are the average of... 

In this paper, an analytical solution for the nonlinear free vibration of a conservative oscillator is presented. The nonlinear governing equation is solved by employing the Variational Iteration Method (VIM). This method is based on the use of Lagrange multipliers for identification of optimal values of parameters in a function. Obtained results reveal that the proposed method is very effective, simple and exact. In the present investigation, the results of this method are compared with those of the Homotopy Analysis Method (HAM), as well as those predicted by the Runge-Kutta method. The excellent accuracy of the obtained results is demonstrated by comparing them with available analytical... 

In this study, the flow of a fiber filled viscoelastic matrix through planar contractions is investigated. It was found that by adding fiber to the matrix vortex, the intensity increases. Fiber orientation along "x" and "y" axes was studied too. It was found that fiber orientation could be used for determining the flow regime through the contraction geometry. The rigidity condition of fibers, which needs the trace of the orientation tensor to be unity everywhere in the domain, is correct except near walls and the reentrant corner, which is slightly less than one. In these regions, the stress magnitude is higher, which results in more numerical errors, and which further leads to some error in... 

This paper addresses the multiple allocation hub set-covering problem considering backup coverage and mandatory dispersion of hubs. In the context of this paper, it has been assumed that a flow is covered if there are at least Q possible routes to satisfy its demand within a time bound. Moreover, there is a lower limit for the distance between hubs in order to provide a degree of dispersion in the solution. Mathematical formulation of this problem is given, which has O( n2) variables and constraints. Computational experiments carried out on the well-known CAB dataset give useful insights concerning model behavior and its sensitivity to parameters  

Structural systems will normally fail as a consequence of a chain of different components failure es. In this paper, fatigue reliability of fixed offshore platforms is investigated by analyzing different failure scenarios. In order to evaluate the occurrence probability of a special scenario, it is divided into a finite number of sub-scenarios. All combinations of time sequences are generated for a given sequence of failures, using a specially developed program. In order to calculate the occurrence probability of each scenario, a massive reliability analysis should be done for each of corresponding sub-scenarios. A large number of sub-scenarios should be analyzed, therefore implementing time... 

Evaluation and control of suspended sediment load as one of the main water quality concerns is important in large basins, especially in basins with planned dam construction. Success in sediment control measures depends, in particular, on proper identification of sediment sources. Since observations alone are normally not adequate for source prioritization/contribution in relation to the downstream sediment loads, hydrological simulation tools may be applied for spatial prioritization of runoff and sediment yield in basins. In this paper, subbasin prioritization was conducted for the Gharasu basin, located in southwestern Iran. Soil and Water Assessment Tool (SWAT) model was calibrated and... 

A deterministic energy supply model with bottom-up structure has limited capability in handling the uncertainties. To enhance the applicability of such a model in an uncertain environment two main issues have been investigated in the present paper. First, a binomial lattice is generated based on the stochastic nature of the source of uncertainty. Second, an energy system model (ESM) has been reformulated as a multistage stochastic problem. The result of the application of the modified energy model encompasses all uncertain outcomes together and enables optimal timing of capacity expansion. The performance of the model has been demonstrated with the help of a case study. The case study has... 

Proton exchange membrane (PEM) fuel cell performance is directly related to the bipolar plate design and their channels pattern. Power enhancements can be achieved by optimal design of the type, size, or patterns of the channels. It has been realized that the bipolar plate design has significant role on reactant transport as well as water management in a PEM Fuel cell. Present work concentrates on improvements in the fuel cell performance by optimization of flow-field design and channels configurations. A three-dimensional, multi-component numerical model of flow distribution based on Navier-Stokes equations using individual computer code is presented. The simulation results showed excellent... 

In this paper, the nonlinear oscillation of a pendulum wrapping and unwrapping on two cylindrical bases is studied, and an analytical solution is obtained using the multiple scales method. The equation of motion is derived based on an energy conservation technique. By applying the perturbation method to the differential equation, the nonlinear natural frequency of the system is calculated, along with its time response. Analytical results are compared with numerical findings and good agreement is found. The effect of large amplitude and radius of cylinders on system frequency is evaluated. The results indicate that as the radius of the cylinder increases, the system frequency is increased....