Sharif Digital Repository

In this study, it is aimed to compare the efficiency of ultrasonic wave technology on asphaltene flocculation inhibition of crude oils with different American Petroleum Institute (API) gravities. A set of confocal microscopy test is performed and a series of statistical analysis is done. According to the results of this study, there is an optimum radiation time for both crudes at which the viscosity and the flocculation rate of asphaltenic crude oils reduces to its minimum. This optimum appears at later times of radiation for extra heavy oil. Also, it is shown that the rate of changes in the properties measured in this study is sharper for extra heavy crude oil. It could be concluded that... 

This experimental study is aimed at evaluation of the performance of secondary WAG injection in carbonate cores at different pressures. To do so, a comprehensive series of high-pressure high-temperature (HPHT) core flooding tests are conducted. The fluid system includes reservoir dead and live crude oil, CO 2, and synthetic brine while the chosen porous media consists of a number of fractured carbonate core samples. Parameters such as oil recovery factor, water and oil production rates, and pressure drop along the core are recorded for both dead and live oil. According to results, at first increasing pressure improves the oil recovery, but this improvement after MMP is not as significant as... 

Although alkaline-surfactant-polymer flooding is proved to be efficient for oil recovery from heavy oil reservoirs, the displacements mechanism/efficiency of this process in fractured systems needs to more discussion, especially in five-spot patterns. In this work, several ASP flooding test were performed on fractured micromodels which were initially saturated with heavy oil at constant flow rate and different fracture geometrical characteristics conditions. The ASP solutions are constituted from 5 polymers i.e. four synthetic polymers include three hydrolyzed polyacrylamide with different molecular weight as well as a non-hydrolyzed polyacrylamide and a biopolymer, 2 surfactants i.e. a... 

Top-down in situ combustion (ISC) involves the stable propagation of a combustion front from the top vertical injector to the bottom horizontal producer. With the exception of laboratory studies of conventional sandstones, no application of the process in fractured carbonates has been addressed. The aim of the present work is to study ISC in the presence of a system of networked fractures using a thermal reservoir simulator from the Computer Modeling Group (CMG; Calgary, AB, Canada). The performance of ISC is compared with nonfractured system under similar conditions. To obtain more realistic results, a history-matched and validated combustion model of an Iranian naturally fractured... 

Toe to heel air injection has been studied on non-fractured sandstone models and is found to be a promising enhanced oil recovery method for certain heavy oil reservoirs, such as those in Canada, but its applicability on fractured reservoirs, such as those in the Middle East, is not investigated yet. The objective of this article is to evaluate the effect of fractures geometrical parameters, such as fracture density, orientation, and location, on the performance of the process in laboratory scale. Simulation results showed that toe-to-heel air injection is more applicable on highly networked fractured reservoirs, such as those that occur in Persian Gulf coast compared to lower density... 

The aim of the present work is to evaluate the effect of fractures geometrical properties such as orientation, density, location, and networking on the conventional fire flooding (CFF) process performance through simulation analysis. Combustion parameters of a fractured low-permeable carbonate heavy oil reservoir in Iran called Kuh-E-Mond (KEM); applied for simulation study and simulator has been validated with KEM combustion tube experimental data. The validated model was modified to study CFF in 3D semi-scaled combustion cells. Simulation results confirmed that CFF is more feasible in the case of densely fractured reservoirs such as those in the Middle East  

Asphaltene precipitation may occur during pressure depletion or gas injection processes in a reservoir. This phenomenon is an important problem during oil production, because it can result in formation damage and the plugging of wellbore and surface facilities. In this work, the precipitation of asphaltenes in an Iranian crude oil, under different pressures, is measured, using an experimental set up based on high-pressure isothermal expansion and also atmospheric titration. For the particular oil investigated, compositional data, precipitation phase diagrams, and bubble point and onset pressures are reported. Also, in this work, the Perturbed Chain form of the Statistical Associating Fluid... 

The top-down in situ combustion (ISC) involves the stable propagation of the combustion front from the top vertical injector to the bottom horizontal producer. Apart from laboratory studies in conventional sandstones, no application of the process in fractured carbonates has been addressed yet. The authors modified a successful combustion tube history matched model of an Iranian low-permeable heavy oil reservoir called Kuh-E-Mond to investigate the feasibility of ISC in fractured carbonate reservoirs mimicking block-scale combustion cells. Effects of fractured geometrical properties such as orientation, location, extension, density, spacing, and dispersion were considered. Results confirmed... 

This work examines the operational parameters that may influence the performance of toe-to-heel steamflooding in a laboratory-scale simulation model built on the basis of the fluid and rock samples from a fractured, low-permeable, carbonate heavy oil reservoir in Southwestern Iran, called KEM (Kuh-e-Mond). Using vertical (V) or horizontal (H) injectors (I) and producers (P), the effects of different well configurations including VIVP, VIHP, 2VIHP, VI2HP, HIHP, and HI2HP, injectors' traversal distance, producers' traversal distance, and horizontal producer length have been investigated. In summary, the results show that 2VIHP scheme performs best in terms of oil recovery and areal/volumetric... 

This work is concerned with the role of geometrical properties of fractures on oil displacement efficiency during solvent injection to heavy oil. Here, a series of solvent injection processes were conducted on one-quarter five-spot fractured micromodels that were initially saturated with the heavy oil, at a fixed flow rate condition. The oil recovery was measured using image analysis of the continuously provided pictures. The results show that for the range of experiments performed here, the maximum oil recovery happens at a fracture orientation angle of 45 degrees. Also, increasing the number of fractures leads to a higher oil recovery factor by solvent in 45 degrees, while it does not... 

Molecular diffusion of gases in crude oils plays a crucial role in several oil recovery processes especially in cold-based production process. However, experimental data concerning CO2 diffusivity in heavy oils due to the tedious nature of diffusivity measurements are relatively rare in the open literature. In this work, a comprehensive experimental investigation of the effective molecular diffusion determination of CO2-heavy oil systems in homogeneous porous media was studied. The so-called pressure decay method was applied to measure the molecular diffusivity of carbon dioxide in heavy oil. Furthermore, effect of various parameters such as initial pressure, temperature and porous media on... 

This work aims to discuss the results of wide ranges of laboratory investigations to evaluate the performance of a newly-formulated surfactant for heavy oil reservoirs in order to improve the microscopic sweep efficiency after water flooding processes. In the first part, the specific behavior of the formulated surfactant including its salinity tolerance, interfacial tension, and optimum performance window was determined. Then, the application of surfactant solutions in real sandstone reservoir rocks was assessed for both oil-wet and water-wet cases. Besides, the effect of changing the capillary and viscous forces and interfacial tension on the residual phase saturations were characterized.... 

In this work, application of CO2 saturated with silica nanoparticles in continuous/water alternating gas (WAG) injection for heavy oil recovery was investigated which has been rarely attended in the available literature. Core displacement tests were conducted to monitor heavy oil recovery in both continuous and WAG injection schemes. It has been observed that for continuous nano-saturated CO2 injection, the oil recovery is higher than pure CO2 injection. This observation might be explained by alteration of rock wettability to a more water-wet condition. In WAG injection scheme, water breakthrough happened later in nano-saturated CO2 than pure CO2 injection. This delayed water breakthrough... 

Plenty of oil reservoirs contain discontinuous shale layers that act as flow barriers. Therefore, understanding their influences on reservoir performance, especially during enhanced oil recovery (EOR) processes, is of great importance. For this purpose, several experiments of water and alkaline-surfactant-polymer (ASP) flooding have been performed on a number of one-quarter five-spot micromodels that contain various configurations of shale layers to simulate shaly porous media. Several features, such as various shale geometrical characteristics and the presence of connate water saturation, were investigated at both macro- and micro-scales. The presence of shales resulted in earlier... 

Application of solar energy compared to conventional gas-burning boilers for steam generation in thermal Enhanced Oil Recovery processes is a newly attended technology, which brings significant benefits to the petroleum industry through environmental and economical aspects. This technique is especially designed for the regions in which gas-burning steam generation is not viable in large scale. The objective of this study is to investigate about viability of using solar energy to generate steam instead of using conventional steam generators in a Venezuelan extra heavy oil reservoir. Limited gas production policy of the Venezuelan government is the major challenge for utilizing gas steam... 

Although Alkaline-Surfactant-Polymer (ASP) flooding is proved to be efficient for heavy oil recovery, the displacement mechanisms/efficiency of this process should be discussed further in fractured porous media especially in typical waterflood geometrical configurations such as five-spot injection-production pattern. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels which were initially saturated with heavy oil. The ASP flooding tests were conducted at constant injection flow rates and different fracture geometrical characteristics were used. The ASP solutions constituted of five polymers, two surfactants and three alkaline types. The results... 

The aim of this contribution is to evaluate the performance of an expanding solvent steam assisted gravity drainage (ES-SAGD) process in naturally fractured systems. Steam-assisted gravity drainage (SAGD) and ES-SAGD processes have been investigated in both conventional and fractured reservoir models and the effect of networked fractures on the recovery mechanism and performance of ES-SAGD has been investigated. Operational parameters such as steam quality, vertical distances between wells, and steam injection temperature have been also evaluated. Finally, to study the effect of a well's horizontal offset, a staggered ES-SAGD well configuration has been compared to a stacked ES-SAGD  

The effect of an efficient biosurfactant produced from Pseudomonas aeroginosa MR01, a bacterial strain isolated from oil excavation areas in southern Iran, on the recovery of residual oil trapped within carbonate rocks, was investigated. In a core holder set-up, bearing a number of limestone-and dolomite-containing core samples, biosurfactant flooding resulted in oil recoveries as large as 20% to 28% Residual Oil (R.O). Biosurfactant injection in less permeable rocks in a range of 0.5 to 32 md was more successful, in terms of oil production. In the case of the least oil recovery via biosurfactant flooding, incubation of the core with a biosurfactant solution at reservoir conditions,... 

The solvent-based process appears to be an increasingly feasible technology for the extraction of heavy oil reserves. However, there is a lack of fundamental understanding of how fracture geometrical characteristics control the oil recovery efficiency in this type of enhanced oil recovery (EOR) technique. In this work, a series of experiments were performed whereby the pure and mixed hydrocarbon solvents (HCS) displaced heavy oil in fractured five-spot glass micro-models. Successive images of the solvent injection process were recorded. The oil recovery factor, as a function of injected pore volume of solvents, was measured using image analysis of the provided pictures. It has been observed... 

Despite numerous experimental studies, there is a lack of fundamental understanding on how the chemical composition of a co-solvent at different wettability conditions might affect the pore-scale events and oil recovery efficiency in 5-spot models. In this study visualization of solvent injection experiments performed on a one-quarter five spot glass micromodel, which was initially saturated with the crude oil. One hydrocarbon solvent was considered as base, and four other groups of commercial chemicals, as well as their mixtures, were used as co-solvents. Microscopic and macroscopic displacement efficiency of solvent mixtures in both strongly water-wet and oil-wet media has been studied. It...