Sharif Digital Repository

This work examines the operational parameters that may influence the performance of toe-to-heel steamflooding in a laboratory-scale simulation model built on the basis of the fluid and rock samples from a fractured, low-permeable, carbonate heavy oil reservoir in Southwestern Iran, called KEM (Kuh-e-Mond). Using vertical (V) or horizontal (H) injectors (I) and producers (P), the effects of different well configurations including VIVP, VIHP, 2VIHP, VI2HP, HIHP, and HI2HP, injectors' traversal distance, producers' traversal distance, and horizontal producer length have been investigated. In summary, the results show that 2VIHP scheme performs best in terms of oil recovery and areal/volumetric... 

Optimal well placement is a crucial step in efficient reservoir development process which significantly affects the productivity and economical benefits of an oil reservoir. However, it is a complex and challenging problem due to the different engineering, geological and economical variables involved. This leads to a very large number of potential scenarios that must be evaluated using numerical reservoir simulations. The key points in such an optimization process are using a fast function evaluation tool and development of an efficient and robust optimization algorithm that can find good solutions with a minimum required number of function evaluations. This study presents an approach that... 

Simulation of the in-situ combustion process is one of the most complex simulations amongst other reservoir flow simulations. Accurate simulation of the process is critical to obtain a successful implementation of the in-situ combustion process. Several factors impact performance of the simulation of this process. First are all the numerical models used for different sub-processes, such as reactions, fluid phase behavior, heat loss to surrounding formations and fluid physical properties. In the previous numerical models of the in-situ combustion process, very simplified models were used for the phase behavior of the fluid. Recent studies show that the fluid phase behavior model has a great... 

Several methods have been developed in the past for analyzing the porosity and other types of well logs for large-scale porous media, such as oil reservoirs, as well as their permeability distributions. We developed a method for analyzing the porosity logs φ(h) (where h is the depth) and similar data that are often nonstationary stochastic series. In this method one first generates a new stationary series based on the original data, and then analyzes the resulting series. It is shown that the series based on the successive increments of the log y(h)=φ(h+δh)-φ(h) is a stationary and Markov process, characterized by a Markov length scale hM. The coefficients of the Kramers-Moyal expansion for... 

Many oil reservoirs encounter asphaltene precipitation as a major problem during natural production. In spite of numerous experimental studies, the effect of temperature on asphaltene precipitation during pressure depletion at reservoir conditions is still obscure in the literature. To study their asphaltene precipitation behavior at different temperatures, two Iranian light and heavy live oil samples were selected. First, different screening criteria were applied to evaluate asphaltene instability of the selected reservoirs using pressure, volume, and temperature data. Then, a high pressure, high temperature filtration (HPHT) setup was designed to investigate the asphaltene precipitation... 

Water and miscible gas injection scenarios are considered in an Iranian oil reservoir for the purpose of recovery improvement. Firstly reservoir fluid modeling and modeling of a slim tube test were performed. Then, water alternating gas (WAG) injection was evaluated by optimizing the WAG half cycle and WAG ratio. Alternatively, hybrid WAG and separate injection of water and gas in the top and bottom of the reservoir were also investigated. The numerical simulation results showed that the optimum WAG, with half cycle of 1.5 years and WAG ratio of one, gave the highest recovery factor. Moreover, economic evaluation of these scenarios indicated that WAG had the highest net present value and was... 

Application of solar energy compared to conventional gas-burning boilers for steam generation in thermal Enhanced Oil Recovery processes is a newly attended technology, which brings significant benefits to the petroleum industry through environmental and economical aspects. This technique is especially designed for the regions in which gas-burning steam generation is not viable in large scale. The objective of this study is to investigate about viability of using solar energy to generate steam instead of using conventional steam generators in a Venezuelan extra heavy oil reservoir. Limited gas production policy of the Venezuelan government is the major challenge for utilizing gas steam... 

The amount of residual oil trapped in the matrix of a fractured reservoir after water drive, either natural water drive or water injection, depends on the wettability of the matrix rocks. Gas oil gravity drainage (GOGD) has been proposed as the tertiary oil recovery process for this type of oil reservoir. The current work focuses on experimental investigation of tertiary GOGD in fractured porous media under different types of matrix wettability. Results of a set of experiments performed in artificial porous media composed of sand packs and glass beads of different wettability have been used to check the GOGD rate and the ultimate oil recovery for previously waterflooded models. A novel... 

A Green Element numerical formulation is used to solve the time-dependent nonlinear one-dimensional counter-current spontaneous imbibition diffusion equation in which water enters a water wet rock spontaneously while oil escapes by flowing in the opposite direction. The Green Element Method (GEM) is an element by element approach of the boundary element method. In this new method, by generating large sparse global matrices and yet taking advantage of properties of Green's function, solution of more complicated physical problem is achievable while at the same time much less computational effort is needed rather than boundary element method (BEM). By discretizing both the boundary and problem... 

Oil reservoirs are very complex with geological heterogeneities that appear on all scales. Proper modeling of the spatial distribution of these heterogeneities is crucial, affecting all aspects of flow and, consequently, the reservoir performance. Reservoir connectivity and conductivity evaluation is of great importance for decision-making on various possible development scenarios including infill drilling projects. This can be addressed by using the percolation theory approach. This statistical approach considers a hypothesis that the reservoir can be split into either permeable (good sands) or impermeable flow units (poor sands) and assumes that the continuity of permeability contrasts... 

Gas injection process for more oil recovery and in particular CO2 injection is well-established method to increment oil recovery from underground oil reservoirs. CO2 sequestration which takes place during this enhanced oil recovery (EOR) method has positive impact on reducing the greenhouse gas emission which causes global warming. Direct gas injection into depleted oil reservoirs, encounters several shortcomings such as low volumetric sweep efficiency, early breakthrough (BT) and high risk of gas leakage in naturally fractured carbonate oil reservoirs. Carbonated water injection (CWI) has been recently proposed as an alternative method to alleviate the problems associated with gas... 

As the oil production from conventional oil reservoirs is decreasing, oil production through Enhanced Oil Recovery (EOR) processes is supposed to compensate for both the oil production reduction in matured oil reservoirs and the worldwide dramatic increase in oil demand. Therefore, developing a strategy to choose an optimized EOR technique is crucial to find a resolution for production decline in oil reservoirs. A screening tool recommending the most appropriate EOR method is proposed in this study. An expert fuzzy logic system is employed to screen four well-known EOR methods including miscible CO2 injection, miscible HC gas injection, polymer flooding and steam injection based on the... 

Most of the Iranian oil reservoirs are naturally fractured. Reinfiltration is a key proceess which controls oil flow from the upper to the lower matrix block. However, theoretical modeling of fracture aperture as well as fracture dip angle effects on flow rate of drained oil during reinfilteration process remains a topic of debate in the literature. Moreover, there is no reported experience in the literature that compared the oil velocity predicted by traveling oil bridges and continuum film flow approaches. In this work reinfiltration process is modeled through two different approaches: discrete traveling liquid elements and continuum film flow along inclined fractures. For a case study... 

The impacts of salinity adjustment of displacing fluid have recently gained special attention to enhanced oil recovery (EOR). Different mechanisms have been studied widely in the literature while some of them are still subjugated to more scrutiny. The effects of diluted sea water on the interfacial properties of brine and asphaltenic-acidic crude oil and the wettability alteration of carbonate reservoir rock are investigated in this experimental observational work. The measurements of interfacial tension (IFT) and contact angle (CA) as two main parameters are studied. Besides, the effects of asphaltene and resin in the crude oil on the IFT values between the crude oil and aqueous solution... 

The main issue in heavy oils enhanced recovery methods is to reduce their viscosity in order to get a better mobility. This is commonly obtained by blending the oil with light hydrocarbons. Co-solvents are good candidates to improve the hydrocarbon recovery efficiency especially in miscible processes. However, the effect of co-solvents on miscible flooding of heavy oil reservoirs at different pore geometries is not well understood. In this work different one-quarter five-spot network patterns along with those generated from reservoir rocks' thin sections were etches on glass surfaces. The models that had been initially saturated with the heavy crude oil were used to perform a series of... 

Water-in-oil emulsion usually forms during waterflooding in some heavy oil reservoirs. The composition and salinity of the injected water critically affect the w/o emulsion droplet size distribution, which control the emulsion stability and emulsion flow in porous media. The aim of the present work is to assess the effect of different sea water salinities on w/o emulsion stability through microscopic imaging. Therefore, w/o emulsions were prepared with different sea water samples, which were synthesized to resemble Persian Gulf, Mediterranean, Red Sea, and North Sea water samples. The results showed that log-normal distribution function predicts very well the experimental data to track the... 

The concerns for water availability, affordability and environmental consideration have motivated more research on the development of smart water injection for enhanced oil recovery process. Although wettability alteration has been considered as the dominant mechanism, there is an ample space in this area needs to be explored more. Therefore, a systematic series of experiments is designed and performed to examine the effect of salinity and ion type on the wettability of the carbonate rock surface to find the active mechanisms. For this purpose, the concentrations of different salts including NaCl, KCl, CaCl2 and MgCl2 are examined during 10 days of soaking for salts concentrations range of... 

The performance of CO2 injection into a semi-heavy oil reservoir was investigated at reservoir conditions, using highly permeable sandstone in a complete series of PVT tests and coreflooding experiments. Analysis of involved parameters such as: injection rate, injectant type and reservoir pressure were also considered. Oil viscosity reduction and oil swelling are the most influential mechanisms of enhanced oil recovery in this process. The results demonstrated that CO2 injection would decrease the interfacial tension for the high permeable medium in the absence of capillarity, but this reduction may not improve the recovery drastically. One of the main important aspects of this work is the... 

Waterflooding has been regarded as an efficient method for pressure maintenance of oil reservoirs. x Improved techniques such as Smart Water flooding as a new EOR/IOR process has gained more momentum based on the recent research activities in this field and the reduction of oil price. Despite many efforts on achieving the governing mechanisms of Smart Water flooding in many individual fields, most of data are sparse and more possible mechanisms which explains all the interactions yet to be introduced. This experimental study used a systematic laboratory framework which is based on seawater treatments at fixed ionic strength to eliminate the ionic strength effects, NaCl considered as the... 

Concerns about climate change have persuaded the researchers to examine CO2 injection in the form of carbonated water (CW) into oil reservoir as a safe and effective CO2 storage and enhanced oil recovery process. Although interfacial tension (IFT) between crude oil and injected fluid has a vital role on the displacement of fluids in porous media, the effect of CO2 and crude oil type on the dynamic IFT of crude oil under different operational conditions is not well understood. Accordingly, this study was carried out to assess the effects of temperature, pressure, crude oil type and CO2 on the dynamic IFT of crude oil/CW. To achieve this goal, two types of crude oil were provided from southern...