Sharif Digital Repository

The coupling of photocatalysis with membrane technology, which is known as photocatalytic membrane reactors (PMRs), has received great consideration in recent years and become a promising approach with the high potential to improve the fouling of membranes. In this paper, the photocatalyst of g-C3N4 treated with H2O2 was incorporated with a polysulfone membrane to enhance the anti-fouling properties of the membrane. AFM, FE-SEM images, porosity, and contact angle analysis indicated that the membrane properties like hydrophilicity, porosity, and surface roughness were improved. Also, UV–visible DRS, PL spectra, EIS analysis confirmed that the treated g-C3N4 (H2O2-g-C3N4) had high light... 

The present article deals with super-swelling behavior of crosslinked homopolymer of 2-acrylamido-2-methylpropane sulfonic acid, poly(AMPS), in binary mixtures of dimethyl sulfoxide (DMSO) and various polar solvents including water, mono-, and polyhydric alcohols, and amide solvents such as N-methyl pyrrolidone. Extraordinary phase transition sequences including a new unusual swelling phenomenon, referred to as "overentrant" swelling, was observed for this polymeric organogel in the solvent/DMSO mixtures. The swelling behaviors were preliminarily explained based on the major interactions involved in the solvation process and dielectric constant of the swelling media. It was established that... 

In this study, a novel biodegradable hyaluronic acid (HA) based microgel were prepared via enzymatic crosslinking of tyramine conjugated HA (HA-TA) in an inverse microemulsion. HA-TA microdroplets were crosslinked within a few seconds in the presence of horseradish peroxidase (HRP) and hydrogen peroxide (H 2 O 2 ). The high water content of the polymeric network and the inherent negative charge of the HA-TA microgels provided a suitable platform for encapsulation of cationic proteins like lysozyme and TGF-β1 growth factor. The results demonstrated that lysozyme was released, after an initial burst release, in a suitable sustained manner over a period of four weeks. Both diffusion and... 

While energy consumption is increasing worldwide due to population growth, the fossil fuels are unstable and exhaustible resources for establishing sustainable life. Using biodegradable compounds present in the wastewater produced in industrial process as a renewable source is an enchanting approach followed by scientists for maintaining a sustainable energy production to vanquish this problem for ulterior generations. In this research, bioelectricity generation with whey degradation was investigated in a two-chamber microbial fuel cell with humic acid as anodic electron mediator and a cathode compartment including combinational electron acceptor. Escherichia coli was able to use the... 

Targeted drug delivery systems using nanocarriers offer a versatile platform for breast cancer treatment; however, a robust, CD44-targeted niosomal formulation has not been developed and deeply studied (both in vitro and in vivo) yet. Here, an optimized system of epirubicin (Epi)-loaded niosomal nanoparticles (Nio) coated with hyaluronic acid (HA) has been engineered for targeting breast cancer cells. The nanoformulation was first optimized (based on size, polydispersity index, and entrapment efficiency); then, we characterized the morphology, stability, and release behavior of the nanoparticles. Epirubicin release from the HA-coated system (Epi-Nio-HA) showed a 21% (acidic buffer) and 20%... 

A composite film constructed of surfactant doped over-oxidized polypyrrole and multi-walled carbon nanotube was prepared on the surface of glassy carbon electrode by the electro-polymerization method. Surface characterization of the modified electrode was performed by scanning electron microscopy, cyclic voltammetry and electrochemical impedance spectrometry. The investigations have been proved that the over-oxidation of the modifier film resulted in a porous thin layer that improves the interlayer diffusion mechanism for the electroactive species. On the other hand, the negative charge density on the surface of the electrode excludes the negative analytes (e.g. ascorbate and Fe(CN)63?/4?)... 

There are high attractions in the development of conducting polymer (CP) coatings to improve the electrochemical properties and biocompatibility of electrodes in the area of biosensors. A new type of the modified electrodes is prepared in a layer-by-layer process by using multi-walled carbon nanotube (MWCNT) and poly-pyrrole. In this procedure, the glassy carbon electrode is casted by a drop suspension of MWCNT, which leads to form a thin film of nanotube on its surface. In the second step, electrochemical polymerization of pyrrole in the presence of tiron (used as doping anion) is performed on the surface of the MWCNT pre-coated electrode. The modification procedure led to fabrication of a... 

The electrochemical oxidation of sumatriptan on the surface of carbon paste electrode modified with multi-walled carbon nanotube and cobalt methyl-salophen complex is studied by using cyclic voltammetry and polarization studies. The results indicate that the drug is irreversibly oxidized in a one electron oxidation mechanism. It was found that the peak potential shifted negatively with increasing pH, confirms that H + participate in the oxidation process. The electrode is shown to be very effective for the detection of sumatriptan in the presence of other biological reductant compounds. The prepared modified electrode exhibits a very good resolution between the voltammetric peaks of... 

This study reports the importance of physicochemical characteristics of the core-shell structured polymer-coated Fe3O4 cluster@SiO2 nanocomposite particles for designing the biocatalysts used for transesterification of soybean oil. To demonstrate this issue, two different types of polymer molecules such as polyethylenimine (PEI) and polyacrylic acid (PAA) each with two different molecular weights are employed. The highest fatty acid methyl esters (FAMEs) synthesis yield values are achieved by the lipases immobilized onto the low- and high-molecular-weight PEI-coated particles as compared to those of the low- and high-molecular-weight PAA-coated particles (i.e., ∼64.8% and ∼73.1% versus... 

Development of renewable energies is in parallel with improving high-performance energy storage devices, which can store maximum solar or wind energy and power. Herein, asymmetric energy storage systems are constructed from phosphorus-doped nickel sulfide (P-doped NiS) and biomass-derived humic acid (HA) as positive and negative electrodes, respectively. Initially, nickel sulfide (NiS) nanostructures are directly grown onto nickel foam (NF) via a hydrothermal step. P-doping into the NiS bulk is carried out through a simple hydrothermal process as well. Also, HA is activated via carbonization treatment (A-HA) for employing as the negative electrode's active material. The P-doped NiS-NF... 

A highly sensitive and simple indirect spectrophotometric method has been developed for the determination of trace amounts of inorganic mercury (Hg2 +) in aqueous media. The method is based on the inhibitory effect of Hg2 + on the activity of horseradish peroxidase (HRP) in the oxidation of ascorbic acid by hydrogen peroxide followed by the reduction of Au3 + to Au-NPs by unreacted ascorbic acid and the measurement of the absorbance of localized surface plasmon resonance (LSPR) peak of gold nanoparticles (at 530 nm) which is directly proportional to the concentration of Hg2 +. Under the optimum conditions, the calibration curve was linear in the concentration range of 1-220 ng mL- 1. Limits... 

In the present study, we designed a pH-responsive drug nanocarrier based on polyamidoamine-modified Fe3O4 nanoparticles coated by PEGylated starch-co-poly(acrylic acid). This carrier was used for the controlled release of doxorubicin as an anticancer drug model. The purpose of using the polyethylene glycol moiety is to generate a biostable nanocarrier in blood stream as it has been reported widely in the pharmaceutical literature. The use of a poly(acrylic acid) segment also provided pH-sensitivity to the polymer. Besides, the magnetic nanoparticles facilitate the cancer cell targeting with an external magnetic field located near the tumor site. This carrier was... 

Catalytic ozonation has recently been used as a new means of contaminant removal from water and wastewater. In this study, bone charcoal (BC), a new catalyst prepared under laboratory conditions, was used to catalyze the ozonation of humic substances (HS) in aqueous solutions. The catalytic effect of bone charcoal and the relevant parameters of this ozonation process (solution pH, temperature, scavenger effect, humic acids concentration and BC dosage) were investigated. In the catalytic ozonation experiments, the degradation kinetics was investigated. The reaction rate and the rate constant were determined. The results showed that using a BC catalyst in the ozonation of HS produced a 1.43-... 

The effects of selected metal ions on the gas-phase acidity of weak organic acids have been explored using the DFT and Moller-Plesset Perturbation Theory (MP2) calculations. The three organic acids selected for this study were acetic acid (aliphatic), benzoic acid (aromatic), and glycine (amino acid). The acidities of these compounds are compared with the acidity of their Li +-, Na+-, and K+ -complexed species. The results indicate that upon complexation with Li+, Na+, and K+ at 298K, the gas-phase acidity of acetic acid, for example, varies from 345.3 to 218.8, 230.2, and 240.1 kcal/mol, respectively (i.e., its dissociation becomes much less endothermic). These values indicate that a weak... 

The properties of metallic nanorods vary due to changes in their composition, size and shape, which all depend on the aspect ratio of the nanorods. This work focuses on the optimization of the aspect ratio of silver nanorods using response surface methodology (RSM). Seed-mediated approach, which is the newest method with less difficulty, has been used for the synthesis of silver nanorods. First, silver ions were reduced with sodium borohydride in the presence of sodium citrate dehydrate, as stabilizer. Then, the prepared seeds were added to a solution containing more metal salts, a weak reducing agent (ascorbic acid) and a rod-like micellar template (cetyltrimethylammonium bromide, CTAB).... 

A series of superabsorbent composites were synthesized through graft copolymerization of acrylic acid (AA) onto carboxymethyl cellulose (CMC) in the presence of celite powder using N,N'-methylenebisacrylamide (MBA) as a cross-linking agent and ammonium persulphate (APS) as an initiator. The chemical structure and thermal properties of the composite hydrogels were characterized by FTIR spectroscopy and TGA methods, respectively. Morphology of the samples was examined by scanning electron microscopy (SEM). In free-state, the swelling conditions and hence the related data are not real, because in all their applications the swelling particles of superabsorbent must absorb aqueous solutions while... 

LiCoO2 nanopowders, one of the most important cathode materials for lithium-ion batteries, were synthesized via a modified sol-gel process assisted with triethanolamine (TEA) as a complexing agent. The influence of three different chelating agents including acrylic acid, citric acid, and oxalic acid on the size and morphology of particles was investigated. Structure and morphology of the synthesized powders were characterized by thermogravimetric/ differential thermal analyses (TG/DTA), X-ray diffraction (XRD), and transmission electron microscopy (TEM). Results indicate that the powder processed with TEA and calcinated at 800 °C had an excellent hexagonal ordering of α-NaFeO2 -type (space... 

Catalytic activity of carbon/Pt nanoparticles modified TiO 2 nanotubes electrode was studied by using dopamine contained solutions. The TiO 2 nanotubes electrode was prepared using anodizing method in aqueous solution. The electrochemical pulse method was then applied for electrodeposition of Pt nanoparticles onto the TiO 2 nanotubes. Further modification was achieved by decomposition of polyethylene glycol in a tube furnace to have a carbon/Pt nanoparticles modified TiO 2 nanotubes electrode. The final modified electrode could successfully detect the electro-oxidation of dopamine in a ImM contained solution using cyclic voltametry method. Also, a high sensitivity towards the oxidation of... 

The present work describes sensing application of modified TiO 2 nanotubes having carbon-Pt nanoparticles for simultaneous detection of dopamine and uric acid. The TiO 2 nanotubes electrode was prepared using anodizing method, followed by electrodeposition of Pt nanoparticles onto the tubes. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. The C-Pt-TiO 2 nanotubes modified electrode was characterized by cyclic voltam-metry and differential pulse voltammetry methods. The modified electrode displayed high sensitivity towards the oxidation of dopamine and uric acid in a phosphate buffer solution (pH 7.00). The electro-oxidation currents...