Sharif Digital Repository

Water desalination methods on the basis of newly developed graphene-based membrane have been introduced as a more efficient alternative for the conventional water purification technologies such as classical thermal desalination and reverse osmosis (RO). However, the increase of water permeation rate and ion rejection are still the main subjects in this field. In this study, a new method based on using oscillating electric field is proposed to improve the performance of nanoporous graphene. The effects of the amplitude and oscillation frequency of the electric field and the pore size of the membrane on the water permeation and salt rejection are studied by conducting molecular dynamics... 

Mesh-reinforced cellulose acetate (CA)-based membranes were prepared for forward osmosis (FO) by immersion precipitation. Casting compositions such as CA percent and 1, 4-dioxane/acetone ratio and also preparation conditions such as evaporation time, coagulation bath and annealing temperatures were tested for membranes’ performance. The results were compared with commercially CTA membranes. The best membrane (17.9% polymer and 1, 4-dioxane/acetone ratio of 1.89) showed water flux of 9.3 L/m2h (LMH) and RSF of 0.536 mol NaCl/m2h. Moreover, the membrane structure was reinforced by a polyester mesh, which created micro pores in the back of the membrane. This caused higher water flux and RSF... 

The main challenge in many applications of acetic acid is acid dehydration and its recovery from wastewater streams. Therefore, the performance of polyamide thin film composite is evaluated to separate acetic acid from water. To reach this goal, the formation of polyamide layer on polysulfone support membrane was investigated via interfacial polymerization (IP) of meta-phenylenediamine (MPD) in water with trimesoyl chloride (TMC) in hexane. Also, the effect of synthesis conditions, such as concentration of monomers and curing temperature on separation of acetic acid from water were investigated by reverse osmosis process. Moreover, the separation mechanism was discussed. The solute... 

Today, energy and fresh water play a vital role in human life and the development of economics and also in industry. The energy density in water desalination process is remarkable, so using the renewable energy sources for this purpose can be interesting especially in the high potential renewable energy sources (solar energy) like Middle East. The simulation and feasibility study of solar water desalination system coupled with lithium battery energy storage is considered in the case study of Iran. For these purposes, a complete simulation of the considered system is done. Then, using simulation results, the economic study is carried out using tem economic method. Also, the parametric study... 

Desalination of sea saline water seems a successful solution to supply clean water. For desalination, novel nanoporous membranes have been proposed as a substitute for the classic reverse osmosis (RO) membranes. The one-atom-thick graphyne membrane has shown great potential in water desalination. By applying functional groups (FGs) into the pores of the monolayer graphyne membranes, the water permeability and the ion rejection were passively increased. The effects of applying various FGs such as Hydrogen, Fluorine, Carboxyl and Amine, effect of the salt concentration, the applied pressure, and the effective diameter of the graphyne pores were determined by molecular dynamics (MD)... 

To propose a conceptual arrangement of reverse osmosis desalination plants, four comprehensive decision algorithms and a software are developed. Typically, commercial software predict the performance of the reverse osmosis membranes based on their pre-determined configuration; however, the developed decision algorithms and the developed software in this study have the capability of introducing the conceptual arrangement of pretreatment units, reverse osmosis membranes, and energy recovery devices for both seawater and brackish water reverse osmosis plants. To perform a comprehensive study, alongside the developed software and the decision algorithms, both design considerations of the... 

Heat curing was devised in temperature-controlled steam and water environments to synthesize reverse osmosis (RO) polyamide (PA) membrane. The effect of new curing media on the physicochemical properties and RO performance of the synthesized polyamides was fully investigated using X-ray photoelectron spectroscopy (XPS), attenuated total reflection infrared (ATR-IR), scanning electron microscopy (SEM), atomic force microscopy (AFM), and water drop contact angle. The results show a reduction in amide linkage content on the surface of the steam-cured polyamide and surface and bulk of the water-cured polyamide. Additionally, it was revealed that heat curing in the humidity-controlled environment... 

Reverse Osmosis (RO) is a rapid-developing desalination technology; however, it suffers from inefficient energy consumption. To reduce energy consumption, in this study, reverse osmosis thin-film composite membrane (TFC) module was prepared and composed of m-phenylenediamine (MPD), graphene oxide, and 1,3,5-benzenetricarbonyl chloride (TMC) by interfacial polymerization on the surface of a polysulfone substrate. The graphene oxide was embedded in the mentioned thin-film composite by adding it to MPD aqueous solution to enhance permeation flux and, thus, reduce energy consumption. This study assessed the performance of the membrane using a lab-scale RO setup and evaluated permeability and... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

This paper introduces a new hybrid electro membrane bioreactor (HEMBR) for reverse osmosis (RO) pretreatment and advanced treatment of effluent by simultaneously integrating electrical coagulation (EC) with a membrane bioreactor (MBR) and its performance was compared with conventional MBR. Experimental results and their statistical analysis showed removal efficiency for suspended solids (SS) of almost 100% for both reactors. HEMBR removal of chemical oxygen demand (COD) improved by 4% and membrane fouling was alleviated according to transmembrane pressure (TMP). The average silt density index (SDI) of HEMBR permeate samples was slightly better indicating less RO membrane fouling. Moreover,... 

Thin film composites (TFCs) as forward osmosis (FO) membranes for seawater desalination application were prepared. For this purpose, polyacrylonitrile (PAN) as a moderately hydrophilic polymer was used to fabricate support membranes via nonsolvent-induced phase inversion. A selective thin polyamide (PA) film was then formed on the top of PAN membranes via interfacial polymerization reaction of m-phenylenediamine and trimesoyl chloride (TMC). The effects of PAN solution concentration, solvent mixture, and coagulation bath temperature on the morphology, water permeability, and FO performance of the membranes and composites were studied. Support membranes based on low PAN concentrations (7 wt... 

As the membrane technology developed at the last 30 years, the relevant processes have been significantly developed. One of which is the chlor alkali technology. The development of membrane technology and its effect on Chlor-Alkali process is capable of evaluation in to two different fields, environmental and energy consumption. Some of environmental problems of mercury and diaphragm processes because of their technological development have been eliminated the energy consumption of these processes is significantly decreased especially in membrane and diaphragm processes. Recently investigation in the field of membrane cell is more focused on cell construction, depolarized cathodes, and fluid... 

Microbial desalination cell (MDC) is a new bio-electrochemical technique which converts chemical energy into electrical energy, and at the same time desalinates water and treats wastewater. In this study, MDC performance and water biofouling conditions were tested as an efficient pretreatment desalination process of reverse osmosis (RO). The experiments were designed in a three-chamber reactor to compare the performance of batch and continuous fed modes, using bio-cathode and synthetic wastewater in four different hydraulic retention times and 17 and 35 g/L NaCl concentrations. According to the results, maximum salt removal of about 52.3% was obtained in the continuously fed MDC at 35 g/L... 

Nanostructured graphene based membranes demonstrated excellent capabilities in various applications in nanofiltration and energy conversion due to unique atomically smooth surfaces and adjustable pore size or interlayers spacing at Angstrom scales. There are some reports on the osmotic power generation using physical confinements and electrostatic interactions between ions and GO membranes. However, the results indicated insufficient power densities (˂1 W/m2) can be achieved because of swelling of interlayer spacing of the GO membranes upon exposure to aqueous solutions which results in reducing the influence of confinement on ionic motilities. Here, the GO fibers is presented as one... 

The reverse osmosis (RO) desalination capability of hydrogenated and hydroxylated graphene nanomesh membranes (GNMs) inspired by the morphology of carbon nitride (C2N) has been studied by using molecular dynamics simulation. As an advantage, water permeance of the GNMs is found to be several orders of magnitude higher than that of the available RO filters and comparable with highly strained C2N (S-C2N) as follows: 6,6-H,OH > 12-H > S-C2N > 5,5-H,OH > 10-H. The reverse order is found for salt rejection, regardless of S-C2N. The hydrophilic character of the incorporated -OH functional group is believed to be responsible for linking the water molecules in feed and permeate sides via the... 

In this research, the design of a solar reverse osmosis desalination plant was investigated by integrating various components using TRNSYS and ROSA software. To this goal, a two-stage reverse osmosis system with 50% recovery in the city of Chabahar was modeled. The calculations were performed in three different case studies, i.e., a photovoltaic power plant, a solar collector power plant with Organic Rankine Cycles, and a photovoltaic thermal power plant with Organic Rankine Cycles, with the reverse osmosis desalination plant being a novel investigation. Water production and electrical energy generation of each case study were evaluated both on a daily and yearly bases. The simulation... 

Gels are composed of crosslinked polymer network and solvent molecules. When the main chain network is incorporated with functional groups that can undergo photo-chemical reaction upon light irradiation, the gel becomes light-responsive. Under irradiation, the photosensitive groups may undergo photo-ionization process and generate charges that are attached to the main chain or diffuse into the solvent. The newly generated ions disturb the osmotic balance of the gel medium. As a result, water molecules and mobile ions are driven into or out of the network to compensate the osmotic imbalance, which eventually leads to macroscopic swelling or shrinking of the gel. In this work, we develop a... 

In the present study, for the first time, a thermodynamically consistent large deformation theory is developed to model the multi physics problem of axonal swelling which is the hallmark of most of the brain diseases. To this end, the relevant axonal compartments are first explained and the corresponding model parts are introduced. Next, the problem is formulated as an open thermodynamic system and the corresponding constitutive and evolution equations are extracted utilizing the balance laws. Here, a multiplicative decomposition of the deformation gradient is used to capture the active behavior of the axonal actin cortex. Specific free energy functions are given for the model parts to... 

The suitability of two different pretreatment methods, i.e., coagulation-filtration and ultrafiltration (UF), and two final membrane treatment technologies, namely nanofiltration (NF) and reverse osmosis (RO), for desalination of a cooling tower blowdown (CTBD) was investigated. Particular attention was paid to ensuring that the best pretreatment method could enhance the permeate flux and lifespan of the NF and RO membranes and decrease the membranes' fouling characteristics. Furthermore, the difference of NF and RO performances in CTBD treatment was investigated. In order to find the most appropriate type of coagulant, coagulant dosage, pH and co-coagulant dosage, 21 jar tests were...