Sharif Digital Repository

Although important advances have been acquired in the field of electrocatalysis, the design and fabrication of highly efficient and stable non-noble earth-abundant metal catalysts for the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) remain a significant challenge. In this study, we have designed a superior bifunctional catalyst for OER and HER in alkaline media based on the Co-Mo-P/Zn-Co-S multicomponent heterostructure. The as-prepared multicomponent heterostructure was successfully obtained via a simple three-step hydrothermal-sulfidation-electrodeposition process consisting of star-like Co-Zn-S covered with Co-Mo-P. The structure and morphology evaluation of the... 

A novel method of oxide semiconductor nanoparticle synthesis is proposed based on high-voltage, high-current electrical switching discharge (HVHC-ESD). Through a subsecond discharge in the HVHC-ESD method, we successfully synthesized zinc oxide (ZnO) nanorods. Crystallography and optical and electrical analyses approve the high crystal-quality and outstanding optoelectronic characteristics of our synthesized ZnO. The HVHC-ESD method enables the synthesis of ZnO nanorods with ultraviolet (UV) and visible emissions. To demonstrate the effectiveness of our prepared materials, we also fabricated two UV photodetectors based on the ZnO nanorods synthesized using the subsecond HVHC-ESD method. The... 

A theoretical model concerning simultaneous diffusion and reaction was developed to describe the steady state behavior of a cationic glucose-sensitive membrane with consideration of oxygen limitation and swelling-dependent diffusivities of involved species inside the membrane. Donnan equilibrium was used to find concentrations of buffer ions inside the membrane. The profiles of species concentrations, pH, polymer volume fraction and solute diffusivity inside the membrane were predicted by the model in response to step changes of glucose concentration in the external solution. The influence of various factors on the responsiveness of the membrane was analyzed using the model. The results... 

Monitoring the oxygen in the fume and controlling its amount at high temperatures is an efficient way to regulate combustion efficiency. Zirconia can be an attractive candidate for use in oxygen sensors due to its good physical and chemical properties. The crystal structure of pure zirconia nanopowder due to the lack of cubic phase cannot be used for the fabrication of gas sensor electrodes. Moreover, the change of temperature during ceramic processing and application can promote structural and phase stresses. In this work, to achieve a pure cubic phase, yttria was successfully added to zirconia by a large-scale and effective method called Pechini. The yttria-stabilized zirconia nanopowders... 

Preparation of the defective TiO2 nanoparticles (NPs) have been recently in particular interest for its outstanding applications in visible-light active photocatalysis. In order to make TiO2 visible-light absorber, optical band gap should be modified especially via introducing structural defects like oxygen vacancies as an effective pathway. In this research, we prepared defective rutile TiO2 NPs with highly efficient photocatalytic activity under visible light. The NPs were synthesized by electric arc discharge in water as a cost-effective and environmentally friendly method with capability of defect formation which followed by heat treatment. The photocatalytic activity improvement... 

In current study, a meta-analysis approach was used to identify and evaluate the impact of various factors on the performance of integrated systems of anaerobic digestion with microbial electrolysis cell. In this study, related articles on the topic were systematically identified and collected according to the considered criteria, and the effect size that refers to the value of the difference between variables mean (total chemical oxygen demand (TCOD) removal rate and CH4 yield) was estimated. According to the meta-analysis, fed-batch operation mode, the range of 20< temperature ≤30 °C, metal cathodes, the range of 500< anode surface area ≤5000 cm2, HRT (hydraulic retention time) >20 days,... 

The combustion of kerosene spray under hot-diluted conditions and conventional conditions was experimentally investigated. By examining flame photographs, chemiluminescence images, and in-field temperature measurements, the separate effect of different variables including oxygen concentration, temperature and velocity of the co-flowing air, fuel flow rate and injection pressure, and eventually the type of spray nozzle on multiple parameters such as flame stability, structure, luminosity, temperature field, and qualitative CH radical distribution, as well as HCO and NO2 with lower precision, in the reaction region, have been studied. It was observed that an increment in injection pressure and... 

Considering the dramatic increase of greenhouse gases concentration in the atmosphere, especially carbon dioxide, reduction of these gases seems necessary to combat global warming. Fossil fuel power plants are one of the main sources of CO2 emission and several methods are under development to capture CO2 from power plants. In this paper, CO2 capture from a natural gas fired steam cycle power plant using oxyfuel combustion technology is studied. Oxy-fuel combustion is an interesting option since CO2 concentration in the flue gas is highly increased. The Integrated Environmental Control Model (IECM) developed by Carnegie Mellon University (USA) is used to evaluate the effect of this capture... 

TiO2 and transition metal (Cr, Mn, Fe, Co, Ni, Cu, and Zn) doped TiO2 nanoparticles were synthesized by the sol-gel method using 2-hydroxylethylammonium formate as an ionic liquid. All the prepared samples were calcined at 500 °C and characterized by X-ray diffraction (XRD), BET surface area determination, energy dispersive X-ray (EDX) analysis, diffuse reflectance spectroscopy (DRS), and Fourier transformed infrared (FT-IR) techniques. The studies revealed that transition metal (TM) doped nanoparticles have smaller crystalline size and higher surface area than pure TiO2. Dopant ions in the TiO2 structure caused significant absorption shift into the visible region. The results of... 

In the present work, the effect of graphene oxide (GO) nanosheets on the antibacterial activity of CuO nanowire arrays under visible light irradiation is shown. A combined thermal oxidation/electrophoretic deposition technique was employed to prepare three-dimensional networks of graphene oxide nanosheets hybridized with vertically aligned CuO nanowires. With the help of standard antibacterial assays and X-ray photoelectron spectroscopy, it is shown that the light-activated antibacterial response of the hybrid material against gram-negative Escherichia coli is significantly improved as the oxide functional groups of the GO nanosheets are reduced. In order to explore the physicochemical... 

A systematic comparison of single and binary metal oxide TiO2, TiO2-Er2O3 and TiO2-Ta2O5 thin film gas sensors with nanocrystalline and mesoporous microstructure, prepared by sol-gel route, was conducted. The gas sensitivity was increased by secondary phase introduction into TiO2 film via two mechanisms, firstly due to the inhibition of anatase-to-rutile transformation, since the anatase phase accommodates larger amounts of adsorbed oxygen, and secondly due to the retardation of grain growth, since the higher surface area provides more active sites for gas molecule adsorption. The binary metal oxide gas sensors exhibited a remarkable response towards low concentrations of CO and NO2 gases at... 

The catalytic activity of highvalent iron-oxo active species of heme enzymes is known to be dependent on the nature of the axial ligand trans to the iron-oxo group. In a similar fashion, experimental studies on iron-oxo porphyrin biomimetic systems have shown a significant axial ligand effect on ethylbenzene hydroxylation, with an axial acetonitrile ligand leading to phenyl hydroxylation products and an axial chloride anion giving predominantly benzyl hydroxylation products. To elucidate the fundamental factors that distinguish this regioselectivity reversal in iron-oxo porphyrin catalysis, we have performed a series of density functional theory calculations on the hydroxylation of... 

The current study was designed to assess the association between temporal variations in urban PM2.5 chemical composition, sources, and the oxidative stress and inflammatory response in an alveolar macrophage (AM) model. A year-long sampling campaign collected PM2.5 samples at the Sharif University in Tehran, Iran. PM-induced reactive oxygen species (ROS) production was measured both with an acellular dithiothreitol consumption assay (DTT-ROS; ranged from 2.1 to 9.3 nmoles min−1 m−3) and an in vitro macrophage-mediated ROS production assay (AM-ROS; ranged from 125 to 1213 μg Zymosan equivalents m−3). The production of tumor necrosis factor alpha (TNF-α; ranged from ~60 to 518 pg TNF-α m−3)... 

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of... 

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of... 

A high silica CHA-type membrane was synthesized by the in-situ crystallization method on a disk like α-alumina porous support to separate both acid (H2S, CO2) gases from methane. The membrane showed a permeance of 3.39×10-8mol/m2sPa for pure CO2with CO2/CH4 ideal selectivity of 21.6 at 303K and 100kPa pressure difference across the membrane. The membrane was also tested with N2 and O2 pure gases indicating a small O2/N2 selectivity of 1.2-1.4, which shows that this type of membrane is not suitable for O2/N2 separation. The membrane performance was also analyzed by binary (CO2-CH4) and ternary (H2S-CO2-CH4) gas mixtures, with compositions near the real sour natural gas (CO2: 2.13mol%, H2S:... 

In this work, the electrophoretic deposition method was utilized to immobilize TiO2 particles on stainless steel substrates. In addition, for the first time, statistics-based experimental design using response surface methodology was employed to investigate the effect of four key coating parameters (i.e. applied voltage, calcination temperature, photocatalyst weight percentage, and deposition time) on the photocatalytic degradation. Analysis of variance revealed that the proposed model was adequate. X-ray diffraction and scanning electron microscope were used to evaluate the effects of the parameters on degradation efficiency. The optimum applied voltage, calcination temperature, catalyst... 

In this study, tungsten oxide nanoparticles were fabricated by pulsed laser ablation (PLA) of tungsten target using the first harmonic of a Nd:YAG laser (1064 nm) in deionized water. After ablation, a 0.2 g/lit PdCl 2 solution was added to activate the solution against the hydrogen gas. Dynamic light scattering and X-ray photoelectron spectroscopy were used to measure the average size and the surface chemical composition of the synthesized nanoparticles, respectively. The aim is to investigate the influence of hydrogen exposure time on colouration process of colloidal nanoparticles. According to optical measurements, hydrogen bubbling into the produced colloidal Pd-WO 3 led to formation of... 

Dinuclear cis-dioxomolybdenum(VI) complex [{MoO 2(Bz 2Benzenediyldtc)} 2] coordinated by a quadradentate dithiocarbamate (Bz 2Benzenediyldtc 2- = 1,4-benzenediylbis(benzyldithiocarbamate)(2-)) has been prepared and characterized by elemental analysis, 13C NMR, IR and UV-vis spectroscopy. The kinetics of the oxygen atom transfer between [{MoO 2(Bz 2Benzenediyldtc)} 2] and PPh 3 was studied spectrophotometrically in CH 2Cl 2 medium at 520 nm and four different temperatures, 288, 293, 298 and 303 K, respectively. The reaction follows second order kinetics with the rate constant k = 0.163(2) M -1 S -1 and its increasingly strong absorption at 520 nm clearly indicate the formation of a μ-oxo...