Sharif Digital Repository

Herein, MIL-101(Fe), CoFe2O4, novel binary (MIL-101(Fe)/CoFe2O4, MIL-101(Fe)/GO and CoFe2O4/GO), and ternary (MIL-101(Fe)/CoFe2O4/(3%)GO and MIL-101(Fe)/CoFe2O4/(7%)GO) magnetic composites based upon the MIL-101(Fe) were synthesized. The XRD, FESEM, TEM, EDX, BET-BJH, FTIR, VSM, DRS, PL, EIS and other electrochemical analyses were applied to characterize samples. The MIL/CoFe2O4/(3%)GO demonstrated the best performance compared to other samples for visible light photocatalytic and photo-Fenton-like degradation of Direct Red 23 (DtR-23), Reactive Red 198 (ReR-198) dyes as well as Tetracycline Hydrochloride (TC-H) antibiotic. Degradation of dyes using the ternary composite after 70 min of... 

The COVID-19 outbreak has triggered a massive research, but still urgent detection and treatment of this virus seems a public concern. The spread of viruses in aqueous environments underlined efficient virus treatment processes as a hot challenge. This review critically and comprehensively enables identifying and classifying advanced biochemical, membrane-based and disinfection processes for effective treatment of virus-contaminated water and wastewater. Understanding the functions of individual and combined/multi-stage processes in terms of manufacturing and economical parameters makes this contribution a different story from available review papers. Moreover, this review discusses... 

An efficient method is reported for selective oxidation of various types of sulfides to sulfoxides and sulfones in good to high yields using 30% H 2O2 in the presence of catalytic amounts of molybdate-based catalyst in acetonitrile as solvent at room temperature. The catalyst can be easily recovered and reused for seven reaction cycles without considerable loss of activity  

A novel silica-functionalized ammonium tungstate interphase catalyst has been reported as a non-nitric acid route for adipic acid production from one-pot oxidative cleavage of 30% hydrogen peroxide and catalytic amounts of p-toluenesulfonic acid (PTSA). The catalyst has been simply prepared by commercially available starting material. The structure of the catalyst has been investigated using FT-IR spectroscopy, atomic absorption, TEM, SEM and XRD analysis. The catalyst has shown good to high activity even up to 10 runs of reaction. Simple preparation of the catalyst, avoids using harmful phase transfer catalyst (PTC) and/or chlorinated additives are among the other benefits of this work  

This paper presents a new method for spectrophotometirc detection of sulfide applying fungal peroxidase immobilized on sodium alginate. The sensing scheme was based on decrease of the absorbance of the orange compound, purpurogallin produced from pyrogallol and H2O2 as substrates, due to the inhibition of peroxidase by sulfide. Absorbance of purpurogallin was detected at 420nm by using a spectrophotometer. The proposed method could successfully detect the sulfide in the concentration range of 0.6-7.0μM with a detection limit of 0.4μM. The kinetic parameters of Michaelis-Menten with and without sulfide were also calculated. Possible inhibition mechanism of peroxidase by sulfide was deduced... 

Enzymatic decolorization of the monoazo dye, acid orange 7 (AO7) by the fungal peroxidase from Coprinus cinereus NBRC 30628 is a complex system, which is greatly affected by temperature, pH, enzyme activity and the concentrations of H2O2 and dye concentration. The study of these factors and investigating the combined interactions between them by applying one-factor-at-a-time (OFAT) method and two other statistical methods including 2-factorial method and response surface methodology (RSM) were aimed in this work. Through OFAT analysis the optimized conditions were a temperature of 25 °C, pH 9.0 with H2O2 concentration of about 3.9 mM and AO7 concentration of 40 mg/l. A complete... 

Linear silicone rubber and polyethylene alloy produced from extrusion-injecting process will be present in separate phases. While samples are mixed with 1% dicumylperoxide, DCP, and injected in extruder, an alloy is almost formed. In addition, when the samples containing silicon rubber with vinyl group are mixed with polyethylene and passed in the vicinity of electron beam, a similar reaction occurs, as confirmed from FTIR spectrum. The water contact angles for the samples has been listed in the article. Furthermore, the crystallinity of samples produced via electron beam method is more than that obtained from peroxide method. On the other hand, the tensile strengths of produced samples via... 

Novel molybdenum complex, cis-[MoO2(phox)2] has been synthesized and characterized by IR, 1H NMR, elemental analyses (CHN), and X-ray molecular structure determination methods. This complex was found to be an efficient, selective catalyst for the oxidation of various sulfides to sulfoxides with urea hydrogen peroxide (UHP) in excellent yields (100% for diallylsulfide) and short reaction times (20 min) at room temperature. The catalytic system oxidizes diallylsulfide chemoselectively to its corresponding sulfoxide without any over oxidation in double bond. © 2007 Elsevier B.V. All rights reserved  

Owing to the exceptional properties of graphene and the crucial role of substrate on the performance of electrochemical biosensors, several graphene-based hybrid structures have recently emerged, yielding improved selectivity and sensitivity. To date, most of the reported biosensors utilize solution-driven graphene flakes with drawbacks of low conductivity (due to high inter-junction contact resistant) and structural fragility. Herein, we present a conductive three-dimensional CeO2 semiconductor nanoparticles/graphene nanocomposite, as a platform for sensitive detection of hydrogen peroxide, an important molecule in fundamental biological processes. The 3D conductive graphene architecture is... 

Owing to the exceptional properties of graphene and the crucial role of substrate on the performance of electrochemical biosensors, several graphene-based hybrid structures have recently emerged, yielding improved selectivity and sensitivity. To date, most of the reported biosensors utilize solution-driven graphene flakes with drawbacks of low conductivity (due to high inter-junction contact resistant) and structural fragility. Herein, we present a conductive three-dimensional CeO2 semiconductor nanoparticles/graphene nanocomposite, as a platform for sensitive detection of hydrogen peroxide, an important molecule in fundamental biological processes. The 3D conductive graphene architecture is... 

A polymeric manganese(II) complex with the general formula [Mn(O 2CCH2NH2CH2CO2) 2(H2O)2]n from reaction of iminodiacetatic acid and manganese(II) perchlorate under nitrogen in water, was synthesized and characterized. The structure of the complex was determined using single-crystal X-ray diffraction, elemental analysis, IR and UV-vis spectra. This complex exhibited excellent catalytic activity and selectivity for oxidation of various alcohols and sulfides to the corresponding aldehydes/ketone and sulfoxides using urea hydrogen peroxide and oxone (2KHSO 5·KHSO4·K2SO4), respectively, as oxidants under air at room temperature. The easy preparation, mild reaction conditions, high yields of the... 

A mononuclear mixed ligand complex of iron, [FeIII(N-OPh-sal)(acac)EtOH], where Hacac and N-HOPh-Hsal denote acetylacetone and N-hydroxyphenyl-salicylideneamine, respectively, has been synthesized and characterized by elemental analysis, spectral studies and X-ray crystallography. The catalytic system containing this complex and urea hydrogen peroxide as oxidizing agent was used to selectively oxidize a range of sulfides to the corresponding sulfoxides in good yields under mild conditions. The electronic spectra of the catalytic system were applied to explore reactivity and stability of the catalyst during sulfide oxidation reactions and to examine the nature of active species, as well. ©... 

This article investigates phenol removal from an aqueous solution by using enzymatic and photocatalytic methods and the efficiency of these methods has been compared. In enzymatic and photocatalytic methods, Coprinus cinereus, peroxidase enzyme and commercial TiO2 powders (Degussa P-25) in aqueous suspension were used, respectively, in ambient temperature. The effects of different operating parameters such as duration of process, catalyst dosage or enzyme concentration, pH of the solution, initial phenol concentration and H2O2 concentration on both processes were examined. In enzymatic method, efficiency of degradation reached 100% within 5min, while in the photocatalytic method, the... 

Alcohols have been successfully converted into their corresponding carbonyl compounds using hydrogen peroxide catalyzed by lithium chloride on montmorillonite K10. Clay supported lithium chloride can be recovered after using as catalyst for oxidation of alcohols. The future runs according to this procedure showed no considerable decrease in the reaction yield and catalyst effect  

In this study, the enhanced trichloroethylene (TCE) degradation performance was investigated by polyvinyl alcohol coated calcium peroxide nanoparticles (PVA@nCP) as an oxidant in Fe(II)-based catalytic systems. The nanoscale iron sulfide (nFeS), having an average particle size of 115.4 nm, was synthesized in the laboratory and characterized by SEM, TEM, HR-TEM along with EDS elemental mapping, XRD, FTIR, ICP-OES, and XPS techniques. In only ferrous iron catalyzed system (PVA@nCP/Fe(II)), TCE degradation was recorded at 58.9% in 6 h. In comparison, this value was increased to 97.5% or 99.7% with the addition of citric acid (CA) or nFeS in PVA@nCP/Fe(II) system, respectively. A comparative... 

In this study, the enhanced trichloroethylene (TCE) degradation performance was investigated by polyvinyl alcohol coated calcium peroxide nanoparticles (PVA@nCP) as an oxidant in Fe(II)-based catalytic systems. The nanoscale iron sulfide (nFeS), having an average particle size of 115.4 nm, was synthesized in the laboratory and characterized by SEM, TEM, HR-TEM along with EDS elemental mapping, XRD, FTIR, ICP-OES, and XPS techniques. In only ferrous iron catalyzed system (PVA@nCP/Fe(II)), TCE degradation was recorded at 58.9% in 6 h. In comparison, this value was increased to 97.5% or 99.7% with the addition of citric acid (CA) or nFeS in PVA@nCP/Fe(II) system, respectively. A comparative... 

Numerical study of two-dimensional supersonic hydrogen-air mixing layer is performed to investigate the effects of turbulence and chemical additive on ignition distance. Chemical reaction is treated using detail kinetics. Advection upstream splitting method is used to calculate the fluxes, and one-equation turbulence model is chosen here to simulate the considered problem. Hydrogen peroxide is used as an additive and the results show that inflow turbulence and chemical additive may drastically decrease the ignition delay in supersonic combustion  

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of... 

Carbonaceous materials (CMs) have been applied extensively for enhancing the catalytic performance of environmental catalysts, however, the self-catalytic mechanism of CMs for groundwater remediation is rarely investigated. Herein, we unveiled the catalytic ability of various CMs via Fe(III) reduction through polyvinyl alcohol-coated calcium peroxide nanoparticles (PVA@nCP) for trichloroethylene (TCE) removal. Among selected CMs (graphite (G), biochar (BC) and activated carbon (AC)), BC and AC showed enhancement of TCE removal of 89% and 98% via both adsorption and catalytic degradation. BET and SEM analyses showed a higher adsorption capacity of AC (27.8%) than others. The generation of...