Sharif Digital Repository

In the present paper, the use of a carbon paste electrode modified by 2,2′-[1,2 buthanediylbis (nitriloethylidyne)]-bis-hydroquinone (BH) and TiO2 nanoparticles prepared by a simple and rapid method was described. The modified electrode showed an excellent character for electrocatalytic oxidization of norepinephrine (NE), acetaminophene (AC) and folic acid (FA). Using differential pulse voltammetry (DPV), a highly selective and simultaneous determination of NE, AC and FA has been explored at the modified electrode. Differential pulse voltammetry (DPV) peak currents of NE, AC and FA increased linearly with their concentration at the ranges of 4.0-1100.0 μM, 12.5-500.0 μM and 200.0-3200.0 μM,... 

Various alcohols and phenols were silylated to trimethylsilyl ethers with hexamethyldisilazane in the presence of solid lithium perchlorate under very mild, neutral, and solvent-free conditions in good to excellent yields  

A polymeric material, polyaniline, was employed as a new sorbent for solid-phase extraction (SPE) of some environmental pollutants from water samples. Chlorophenols were extracted from aqueous samples by SPE using 120 mg polyaniline and determined by gas chromatography with electron-capture detection. The acetate esters of these phenols were formed by the direct addition of acetic anhydride to the organic extractant in the presence of K2CO3. Different conditions were applied to obtain higher retaining capacity and breakthrough volumes. The results compared with those obtained by other groups. The RSD for a river water sample spiked at sub-ppb level was lower than 10% (n = 3) and detection... 

In this paper multivariate response surface methodology (RSM) has been used for the optimization of hydrodistillation-headspace solvent microextraction (HD-HSME) of thymol and carvacrol in Thymus transcaspicus. Quantitative determination of compounds of interest was performed simultaneously using gas chromatography coupled with flame ionization detector (GC-FID). Parameters affecting the extraction efficiency were assessed and the optimized values were 5 min, 2 μL and 3 min for the extraction time, micro-drop volume and cooling time after extraction, respectively. The amounts of analyte extracted increased with plant weight. The calibration curves were linear in the ranges of 6.25-81.25 and... 

Over the past few decades, biological hazards and organic pollution have become major environmental concerns. Photocatalysis has been found to be effective in minimizing the negative impacts of these issues in air and water. Lozenge shape Ag/AgCl/ZnTiO3 photocatalysts were fabricated by a facile two-step synthesis method, including hydrothermal and coprecipitation. The physicochemical characteristics and morphological properties of the structures were comprehensively described taking advantage of a multi-technique approach. The prepared photocatalysts offered excellent nitrophenol mineralization (>90%) after 90 min of visible light irradiation. Based on the spin-trapping ESR technique, •O2̅–... 

A reliable, simple, and sensitive fluorescence method was developed for the determination of methyl parathion (MP) in rice using MoS2 quantum dots (QDs). Rapid hydrolysis of MP under alkaline conditions, and thus the formation of p-nitrophenol (p-NP) can be used for MP detection. The functional mechanism of the nanoprobe relies on p-nitrophenol-induced photoluminescence quenching of MoS2 QDs. The high probability of resonance energy transfer (RET) stems from the spectral overlap of MoS2 QD emission spectra and the absorption spectra of p-NP. The high value of the Stern-Volmer constant (KSV = 3.73 × 104 M-1) suggests the efficient quenching of MoS2 QDs by MP in the course of the ET process.... 

The objective of this study was to model the extent of improvement in the degradability of phenol dyes by SnO2/Fe3O4 nanoparticles using a photocatalytic reactor. The effect of operative parameters including catalyst concentration, initial dye concentration, stirring intensity, and UV radiation intensity on the photocatalytic batch reactor during removal of phenol red was investigated. Fractional factorial design and response surface methodology were used to design the experiment layout. The SnO2/Fe3O4 nanoparticles were synthesized using the core-shell method. The results of x-ray diffraction and transmission electron microscopy showed the successful synthesis of these nanoparticles. The... 

Modeling and simulation of fixed bed three-phase catalytic reactors are considered for wet air catalytic oxidation of phenol to perform a comparative numerical analysis between tricklebed and packed-bubble column reactors. The modeling involves material balances both for the catalyst particle as well as for different fluid phases. Catalyst deactivation is also considered in a transient reactor model to investigate the effects of various parameters including reactor temperature on catalyst deactivation. The simulation results indicated that packed-bubble columns were slightly superior in performance than trickle beds. It was also found that reaction temperature was the most effective... 

BiOBrxCl1-x (0xCl1-x. The UV-visible diffuse reflectance and photoluminescence (PL) spectroscopies revealed the indirect band gap of ∼2.82 eV for the bismuth oxybromochloride nanoflakes. Visible light-assisted photocatalytic studies showed that the degradation efficiency of the as-prepared BiOBrxCl1-x for (100 mL of 10 mg L-1)... 

Phenolic compounds and carboxylic acids are methylated with dimethyl carbonate in the presence of a catalytic amount of BF3· OEt2, DBU, or KOH, in good to excellent yields under microwave irradiation and solvent-free conditions  

Composites of phenol-formaldehyde (PF) resin with Closite Na+ and Closite 30B up to 20 wt% loadings were prepared by solution mixing. Tensile testing showed that both pristine and organically modified clays increased considerably the mechanical properties of PF resin at 2.5 wt% loading followed by marginal improvement or even sacrificed properties at high loadings. DMA and DSC analyses suggested development of a highly crosslinked and well adhered interphase around silicate layers. A novel three-phase model considering the interphase region was proposed to predict composite modulus. The model was successfully employed to correlate morphological characteristics and mechanical properties of... 

Bisphenol A (BPA), which is a major component in the production of various consumer products, is one of the most significant endocrine-disrupting chemicals. In this research, the biocatalytic elimination of Bisphenol A using laccase produced by Phanerochaete chrysosporium was examined and optimized. The response surface methodology was used to study the effect of independent variables such as pH, temperature, initial laccase activity, initial Bisphenol A concentration, and the interactive effects of each variable on the removal of Bisphenol A and residual enzyme activity. Based on response surface plots, the maximum Bisphenol A removal (93%) was detected at a pH value of 8, temperature 40... 

Bisphenol A (BPA), which is a major component in the production of various consumer products, is one of the most significant endocrine-disrupting chemicals. In this research, the biocatalytic elimination of Bisphenol A using laccase produced by Phanerochaete chrysosporium was examined and optimized. The response surface methodology was used to study the effect of independent variables such as pH, temperature, initial laccase activity, initial Bisphenol A concentration, and the interactive effects of each variable on the removal of Bisphenol A and residual enzyme activity. Based on response surface plots, the maximum Bisphenol A removal (93%) was detected at a pH value of 8, temperature... 

Iron oxyhydroxide (α-FeOOH, Goethite) is one of the most thermodynamically stable iron oxides and a widespread soil mineral. In this study, a mixture of two phenolic extracts of rosemary and Echinacea was utilized as stabilizing and reducing agents for the synthesis of Goethite (FeOOH) nanoparticles without utilizing harmful toxic solvents. The resulting nanoparticles were characterized by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM)-energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), vibrating-sample magnetometer (VSM), thermogravimetry/differential thermal analysis (TG/DTA), and Brunauer–Emmett-Teller (BET). MTT assay was... 

The present study concerns the electrochemical behavior of catechol and 4-methylcatechol in the presence of 2-mercapto-5-methyl-1,3,4-thiadiazole (MMT) in aqueous medium on the surface of the glassy carbon electrode by means of cyclic voltammetry and controlled-potential coulometry. The oxidation mechanism was deduced from voltammetric and spectrophotometric data. The electro-generation of quinoid intermediates and their subsequent Michael-type reaction with MMT has been investigated as a clean and convenient strategy for the synthesis of corresponding reaction products. In addition, electro-synthesis of Michael addition products has been successfully accomplished by controlled-potential... 

A method based on solid-phase microextraction (SPME) followed by on-fiber derivatization and gas chromatography-mass spectrometry detection (GC-MS) for determination of phenol in air was developed. Three different types of SPME fibers, polar and non-polar poly(dimethylsiloxane) (PDMS) and polyethylene glycol (PEG) were synthesized using sol-gel technology and their feasibility to the sampling of phenol were investigated. Different derivatization reagents for post on-fiber derivatization of phenol were studied. Important parameters influencing the extraction and derivatization process such as type of fiber coating, type and volume of derivatizing reagent, derivatization time and temperature,... 

Veronica genus (Plantaginaceae) is broadly distributed in different habitats. In this study, the inhibitory activity of free soluble and conjugated phenolic extracts of Veronica persica on key enzymes associated to type 2 diabetes (α-glucosidase and α-amylase) and hypertension (angiotensin I converting enzyme, ACE) was assessed, as well as their antioxidant power. Our results showed that both the extracts inhibited α-amylase, α-glucosidase and ACE in a dose-dependent manner. In particular, free phenolic extract significantly (P < 0.05) inhibited α-glucosidase (IC50 532.97 μg/mL), whereas conjugated phenolic extract significantly (P < 0.05) inhibited a-amylase (IC50 489.73 μg/mL) and ACE... 

An easy method for green and low-temperature (40 °C) reduction of graphene oxide (GO) by increasing the antioxidant activity of green tea polyphenols (GTPs) in the presence of iron was developed. The reduction level (obtained by X-ray photoelectron spectroscopy) and electrical conductivity (obtained by current-voltage measurement) of the GO sheets reduced by GTPs in the presence of iron were comparable to those of hydrazine-reduced GO and much better than those of the GO reduced by only GTPs (in the absence of iron) at reduction temperatures of 40-80 °C. Raman spectroscopy indicated that application of GTPs in the presence of iron, in contrast to hydrazine, resulted in better recovering of... 

The photocatalytic degradiation of phenol by nanoTiO2 particles coated on perlite as a new composite nano-catalyst was investigated. Titanium dioxide (Degussa P-25) was immobilized on three different supports (perlite granules, glass plates and steel fiber) by a very simple and inexpensive method. Perlite granules have a porosity of more than 95%, which allows them to stay afloat on water surface. This gives the medium a unique characteristic from the processing point of view, which enables it to get wetted with the polluted solution without requiring any pumping and simultaneously be exposed to the radiation source when coated with the photocatalyst. The photocatalytic activity of prepared... 

A homemade immersed solvent microextraction (SME) device was successfully developed for the trace enrichment of phenols from aqueous samples. A microdrop of butyl acetate was suspended from the tip of a microsyringe needle, immersed in an aqueous spiked solution for a preset time. The microdrop was then retracted into the microsyringe and injected directly into a gas chromatography-mass spectrometry (GC-MS) injection port. Effects of different parameters such as the type of solvent, extraction time, stirring rate, and temperature were investigated and optimized. To reduce the polarity of phenols and prevent tailing effects, all the phenols were derivatized prior to extraction using acetic...